Camlok "THK" Thin Sheet Horizontal Plate Clamps, Range 750kg to 9000kg

The THK horizontal plate clamps when used in pairs are well suited for the horizontal transportation of thin steel sheet / plate.

The same basic design of the Camlok 'CH' range of clamps but have a reversed tooth jaw design, which allows the clamps to be used with thin sheets which may have a tendency to sag or flex.

Two pairs of clamps supported from a lifting beam must be used when handling long plates.

• Capacities: 750kg to 9000kg.
• Capacity applies to a pair of lifting clamps.
• Sold in Pairs.
• Designed to handle a single thin sheet that deflects.
• Plate surface hardness of up to 300 Brinell / 32 Rockwell C.
• Single plates only can be lifted.
• Clamps are used in pairs with a 2 legged chain sling (maximum included angle not to exceed 60º) (Sold separately).
• The angle from the vertical must not exceed 30°!
• Shackles not included.
• Designed and manufactured in the UK.

Dimensions & Specifications

Model	WLL	Plate (mm)	A (mm)	B (mm)	C (mm)	D (mm)	E (mm)	F (mm)	G (mm)	H (mm)	I (mm)	Weight Per Pair (kg)
THK 750	40-750kg	0 - 25	25	72	118	81	20	161	12	86	12	3.4
THK 1500	75-1500kg	0 - 35	36	80	135	102	25	198	15	102	15	6.4
THK 3000	150-3000kg	0 - 35	38	93	168	119	30	227	20	110	20	11.4
THK 4500	250-4500kg	0 - 45	48	103	183	140	30	238	25	122	20	16.8
THK 6000	300-6000kg	0 - 60	63	124	214	176	35	284	30	110	20	23.2
THK 9000	450-9000kg	0 - 60	65	113	223	188	40	317	35	148	20	35.8