Corsby Wire Rope Clip Information

	Competition	Crosby
FORGED FOR CRITICAL APPLICATIONS The proper performance of forged clips depends on proper manufacturing practices that include good forging techniques and accurate machining. Forged clips provide a greater rope bearing surface and more consistent strength than malleable cast iron clips. Fist Grip clips provide a saddle for both the “live” and the “dead” end. Fewer forged clips are required for each termination than with malleable cast iron clips. Forged clips reduce the possibility of hidden defects that are sometimes present in malleable cast iron clips. Malleable cast iron clips should only be used in non-critical applications. ANSI, OSHA, and ASTM recommend only forged clips for critical applications.	Ask: Is the clip forged? Is an adequate cradle provided in the clip base for the wire rope?	Crosby provides forged “Red” U-Bolt Clips and forged Fist Grip clips which meet or exceed Federal Specification Number FF-C-450 and are considered the industry standard.
FULL LINE The proper application of forged clips requires that the correct type, size, number, and installation instructions be used (See APPLICATION INFORMATION below for more information). Availability of a full range of sizes of forged U-bolt clips and forged Fist Grip clips are essential for design flexibility.	Do they have both Fist Grip and U-bolt clips available? Do they have a full range of forged wire rope clip sizes?	“Red” U-Bolt Clips from 1/8" to 3-1/2"* and forged Fist Grip clips from 3/16" through 1-1/2". * The 3-1/2" base is a steel casting.
The clip’s size, manufacturer’s logo, and a traceability code should be clearly embossed in the forging of the clip. These three elements are essential in developing total confidence in the product.	Is the size of clip clearly marked? Do they have a traceability system that is actively used in the manufacturing process? Most do not have a traceability system.	Crosby clearly embosses its logo, the size, and the Product Identification Code (PIC) into all Crosby “Red” U-bolt Clip bases and Fist Grip clips. Crosby’s traceability system is actively used throughout the manufacturing of forged clips. The material analysis for each heat of steel, is verified within our own laboratory.
Detailed application information will assist you in the proper installation of wire rope clips. This information is most effective when provided at the point of application, as well as in supporting brochures and engineering information. The manufacturer must provide this specific information. Generic information will not provide all the needed application instructions. A formal application and warning system that attracts the attention of the user, clearly informs the user of the factors involved in the task, and informs the user with the proper application procedures as needed.	Most competitors do not have application and warnings information with each clip.	Crosby provides detailed application and warning information for all forged clips. Each clip is individually bagged or tagged with the application and warning information. Testing and evaluation of special applications can be performed upon special request.

Full Line: Crosby provides both forged “Red” U-Bolt Clips and forged Fist Grip Clips.
Forged: Crosby “Red” U-Bolt Clips have forged bases on all sizes, except 3-1/2" (the 3-1/2" base is a steel casting). The entire clip is galvanized to resist corrosive and rusting action. Clip sizes 1/8" through 1-1/2" have U-Bolts with rolled threads which enhance the strength of the material and fatigue properties.
Forged: Fist Grip Clips are forged, and the entire clip is galvanized. The double saddle design eliminates the possibility of incorrect installation. Designed as an integral part of the clip, the bolts are opposite one another (see G-429 example below). As result, the nuts can be installed in such a way as to enable the operator to swing the wrench in a full arc for ease of installation.
Application Information: Application and warning information is available for both Crosby “Red” U-Bolt Clips and Fist Grip Clips. The Crosby Warning System is designed to attract the attention of the user, clearly inform the user of the factors involved in the task, and provide the user with proper application procedures. Each Crosby “Red” U-Bolt Clip and Fist Grip Clip is either bagged or tagged with appropriate application and warning information, thus ensuring that the information is available at the point of application for each and every clip during installation.
Material Analysis: Crosby can provide certified material (mill) analysis for each production lot, traceable by the Product Identification Code (PIC). Crosby, through its own laboratory, verifies the analysis of each heat of steel.
Testing: Crosby periodically audits the termination efficiencies of the “Red” U-Bolt Clips and Fist Grip Clips. Upon special request, Crosby will determine the efficiencies of clip assemblies when applied to special rope constructions and special applications.

Crosby Wire Rope Clips Information

Crosby Value Added