RUD "WPPS" Weld Down Swivel Lifting Point, Clevis Connector Fitted With Lifting Hook, WLL Range from 0.63 tonne to 8.0 tonne

Lifting points for welding with a universal connection for every slinging means (hook and ring assemblies, endless sling chains, round slings, loops, etc): Provided with a double ball-bearing which enables jerk - free tilting, swiveling and turning.

The optimised design avoids the damaging of both the slinging means and the precious load when swiveling. Version WPP-S:

The standard universal welding connection using eye hooks for ring assemblies, round slings, wire ropes, hook assemblies etc. is not suitable for permanent swiveling under full load. Welding should be carried out only by qualified persons acc. to DIN EN 287-1.

Technical Specifications

Nominal WLL	T (mm)	A (mm)	B (mm)	C (mm)	D (mm)	G (mm)	Weight (kg)
630kg	115	13	75	18	40	40	0.4
1500kg	147	20	97	25	46	50	1
2500kg	187	28	126	30	61	61	1.5
4000kg	227	36	150	35	78	77	3.3
5000kg	267	37	174	40	95	93	7.1
8000kg	310	49	208	48	100	102	8.2

Proof Testing

There is no requirement to Proof Test RUD Products, either Bolt or Weldable after Installation if the user instructions for welding are carried out correctly. The welding should be carried out by a suitably qualified and competent welder/person.

The supporting structure, or the load, should be of adequate strength to take the stresses involved and this is the responsibility of the engineering designer or equivalent.

RUD Lifting and Lashing Products are Manufactured and conform to EN 1677. No further Proof Testing in the field is required. In fact it would be considered that the Product had been overloaded if a Load more than the recommended Working Load Limit had been applied.

RUD products should be regularly inspected in line with the requirements of LOLER and as per our user instructions at intervals decided by a competent person.