Bux Magnets

Bux Lightweight Wrist Magnet

Wrist Magnet.

Model: WM-526

£68.75

This magnet has been designed to be strapped to your wrist, situated halfway on the palm of your hand. This handy lifting tool provides lift of thin sheet of metal enabling easy one by one separation of a singular sheet from a pile. It features a lightweight metal body and two straps for positive location. More straps can be ordered separately if they are needed. The Wrist Magnet requires good surface conditions to achieve maximum lifting capacity. This tool is ideal for in-plant sheet metal handling at shears and presses.

Bux Handy Magnet - 50kg

Handy Magnet with lift capacity of 50kg for lifting and handling of plates or components

Model: HM-826

Request Quote

The 'Handy Magnet' with release handle is specifically deisnged for the lifting and handling of small components or the destacking of plates.

• Magnet Dimensions: 92 x 50 x 35mm
• Overall Height: 122mm
• Max Capacity: 50kg
• Weight: 0.9kg

Permanent Lifting Magnets - Range from 150kg to 2000kg

Manual Lever Operated Industrial Magnet for Lifting and Transportation of Loads up to 2 tonne.

Model: PLMR-5092

Request Quote

Bux Manual Plate Lifters - Range from 75kg to 400kg

Manual Plate Lifters.

Model: Bux MC / BMPL-825

Request Quote

These items are designed for the lifting of small plates and dragging of medium to large plates

Manual plate lifters for lifting are available in the following sizes:

120kg, 140kg, 300kg

Manual plate lifters for dragging materials are available in the following sizes:

35kg, 116kg, 180kg

Bux Magnetic Clamps

Bux Magnetic Clamps for handling of round and flat materials.

Model: BMC-824

Request Quote These are used for the holding of plates and the holding of cylindrical parts

Bux "BM" & "BMP" Battery Powered Remote Control Lifting Magnet - Range from 1350kg to 3600kg

Infra-red remote controlled 12v battery lifting magnets for round and flat materials. Built in charger included as standard

Model: BLM-517

Request Quote These models contain a powered 12V battery which gives at least 8 hours of operation. They are hand-held, but the infrared remote allows the operator to control the lifting magnet from up to 4.5 metres away. A bail sensor prevents magnet de-energization while the load is being lifted and, for additional safety dual push buttons must be pressed simultaneously for load release.  Visual and audible alarms signify when battery is running low of charge and the magnet will not turn on if the charge is not sufficient to lift a load.

Bux NEO-HV Permanent Lifting Magnet for Vertical Lifting and Turning - 250kg to 1,000kg

Lifting arm for turning work pieces though 90°

Model: Bux NEO-HV / VLM-516

Request Quote