High Speed Electric Chain Hoists for Wind Turbines
LiftingSafety are compiling a collection of hoists for use or potential use on wind turbines from lifting equipment manufacturers all over the globe. We offer both electric chain hoists suitable for offshore use. Used for maintenance and some times and permanent installation. The key feature about a chain hoist used on offshore wind turbines is the lifting speed and the weather protection. The chain hoist must be able to lift the load faster than the see can raise (sea swell) as per the industries acceptable sea state conditions. We offer turbine hoists from Columbus McKinnon and from Verlinde though will be adding to this category in the near future.
CM Shopstar Wind Edition Electric Chain Hoist
High speed, long lift electric hoists for use on wind turbines. 250kg. Many voltages possible.
Model: ShopStar Wind / 2TCH-2631
Request QuoteBetter control on long lifts: Smooth, slow speed starts and stops, fast speed for load transition. Variable frequency drive (VFD) option is also available on the Lodestar. Precision machined and hardened liftwheel: Exact fit of chain in liftwheel provides smoother operation and reduces chain vibration.
Options on 250kg Turbine Chain Hoist: Safe working load, voltage, suspension type, height of lift required (metres)
Suspension: Hook or trolley
CM Lodestar Wind Edition Electric Chain Hoist
High speed, long lift electric hoists for use on wind turbines. 250kg to 1000kg. Many voltages possible.
Model: LodeStar Wind / WTCH-2630
Request QuoteElectro- dynamic braking eliminates heat generated by typical designs. Precision machined and hardened liftwheel: exact fit of chain in liftwheel provides smoother operation and reduces chain vibration, superior gear protection, lifetime lubricated.
Verlinde VLA Wind Turbine Electric Chain Hoist
High-speed electric hoists suitable for use with power supply's up to 690v for use on wind turbines. 160kg to 1 tonne.
Model: WTCH-2626
Request QuoteOptions on Wind Turbine Chain Hoist: Safe working load, trolley required, height of lift is 16 to 80 metres.
Wide range of lifting speeds:16 and 4 m/min, 24 & 6 m/min and 32 & 8 m/min, upper and lower electric limit switches
Brake clutch system: DC electromagnetic disk brake made to last as long as the hoist itself.
Hook: Upper hook (detachable) and lower hook complies with DIN standard, Motor: Thermal protection
High speed, long lift electric hoists for use on wind turbines. 250kg. Many voltages possible.
High speed, long lift electric hoists for use on wind turbines. 250kg to 1000kg. Many voltages possible.
High-speed electric hoists suitable for use with power supply's up to 690v for use on wind turbines. 160kg to 1 tonne.