Pfaff-silberblau

Pfaff Proline "Printers" Pallet Truck. 1150mm x 450mm

Pfaff pallet truck.

Model: Proline Printer / PPPT-4150

From £580.77

Pfaff Silberblau MHS Machine Lifting Jacks - Range from 5000kg to 25,000kg

MHS Machine Lifting Jack MHS 50, MHS 100, MHS 250.

Model: MHS / MM-3206

From £384.52

Multi-functional lifting jacks ideal for low-height lifting or working in confined spaces. These jacks can be used vertically or horizontally and the 25000kg model has an adjustable screw for easy handling.

The 5000kg and 10000kg models have a 3600 rotatable claw making light work of loads. Pump levers can be removed for even better mobility.

Pfaff "Wide" Pallet Truck with a Extra Wide Forks 850mm x 1150mm - 2000kg

Pfaff silverline pallet truck.

Model: HU 20-115 BTS / PS-3230

From £932.13 Ideal for transporting special wide pallets. The Pfaff Silberblau Silverline hand pallet truck offers a fork width of 850mm and safe working loads of upto 2 metric tonnes.

Pfaff-Silberblau SIFEKU Safety Ratchet Crank - 5000kg

Spring operated load pressure brake is silent and weather resistant.

Model: SIFEKU / P-3250

From £137.90 Cast aluminium crank with folding handle. Spring operated load pressure brake is silent in operation and weather-resistant, no ratchet required. 250mm radius for use on jacks up to 5000kgs capacity.

Pfaff-Silberblau SIKU Safety Ratchet Crank - 17mm or 14mm square hole.

Suitable for indoor applications, two versions available

Model: SIKU / P-3251

From £139.00 This crank is used with a double acting pawl assembly and is suitable for indoor applications. The crank is of cast steel with folding handle and incorporates two conical nylon or brass brake discs, dependant on duty, which act as a friction brake. Two versions are available both with 17mm square hole.

Pfaff Silberblau RAKU Safety Ratchet Crank - 17mm square hole.

Short ratchet type crank ideal for confined spaces.

Model: PSSRC-3252

From £238.67 Similar to the SIKU crank this unit has a selector unit which allows either the raise or lower positions to be selected. The crank can either be turned through 3600 (as the SIKU crank) or operated in short ratchet type movements which is especially suited for use in confined spaces.

Pfaff S20 Hand Operated Gearbox - driving torque 12 (daN m)

Hand operated gearbox with cast iron housing mounted into a rolled section fixing bracket.

Model: S20 / HOG-3723

£356.68

The S20 can be used as a rotary actuator, as a gearbox for cable winches or as a gearbox for chain drives. With cast iron hosuing mounted into a rolled section fixing bracket, machined worm wheel and hardened worm shaft running on bronze bushes.

Pfaff S24 Hand Operated Gearbox - driving torque 36 (daN m)

Hand gearbox with die-cast aluminium housing suitable for use in hostile environments.

Model: S24 / HOG-3724

£571.49

Can be used as a rotary actuator, as a gearbox for cable winches or as a gearbox for chain drives. Easy and safe operation.

Pfaff SW-W (SG-H) Steel Wall Mounted Winch

300kg to 750kg heavy-duty side-mounting steel wire rope winches.

Model: SW-W (Formerly SG) / PHWM-3861

From £562.20

Pfaff SW-W heavy-duty hand crank winches for a tensile load of 300kg to 750kg, Pfaff-silberblau offers you winches with spur-gear units which have an externally mounted spring-loaded safety crank and steel panel housing. Features an externally braked safety crank.

Pfaff SCH-W Sluice Gate Jack - Range from 1500kg to 10,000kg

Sluice gate jack.

Model: SCH-W / PS-3193

From £948.04 Only one jack is closing and opening the shutter in such a way – the Sluice gate jack SCH-W – the reliable one among the tested products. This is guaranteed by the spur gear with formed gearwheels, precisely milled crank gear, crank gear, medium and rack pinions… but unique: only Pfaff-silberblau has developed a spring-loaded safety crank which safely provides permanent pressure when required.

Pfaff "MWS" Wall Mounted Spur Gear Manual Hand Winch

150kg to 1500kg side-mounting spur gear drive hand winches with enclosed gear drive for protection.

Model: MWS / SGDM-4480

From £294.36

Pfaff "HU HS" & "HU ES" Scissor Type High Lift Pallet Truck. 800mm Lifting Height. Forks 540mm x 1170mm - 1000kg

Scissor lift pallet truck with optional manual-hydraulic lift or electric-hydraulic lift up to 800mm.

Model: HU HS 10B / HU ES 10A / HLPT-4493

From £909.60

Pfaff ZWW/ZWW-L Rack and Pinion Jack - Range from 250kg to 10 tonnes

Wall-mounted rack and pinion jacks are used for lifting, lowering, pulling and pushing of loads. Various lift heights.

Model: Pfaff ZWW/ZWW-L / RAPJ-4540

From £340.43

Pfaff BETA SL Electric Wire Rope Winch, Range 250kg to 2000kg

Pfaff Electric Wire Rope Winch, for lifting, towing and positioning of loads.

Model: BETA SL / PBSW-4753

Request Quote

Pfaff BETA EL Electric Wire Rope Winch, Range 320kg to 7500kg

Pfaff Electric Wire Rope Winch for lifting, pulling and positioning loads under difficult conditions.

Model: BETA EL / PBEW-4754

Request Quote

Pfaff 'Joker' Electric Drive / Manual Lift Pallet Truck, 1500kg Lifting Capacity

Pfaff 'EGU 15N' Electric Drive and Manual Lift Hand Pallet Truck. 1500kg Capacity, 1150mm Fork Length

Model: PEDP-4857

Request Quote

Pfaff 'Heavy Duty' Electric Pallet Trucks (3 Options), Capacity 1400kg

Pfaff 'EGU PS' Electric Drive and Electric Lift Heavy Duty Pallet Trucks

Model: PDEP-4858

From £6,094.00

Pfaff EGV PSL II Pedestrian Electric Drive Stacker, 1200kg Capacity, Optional Fork Height

Pfaff Electric Drive Pedestrian Stacker, Lift Capacity 1200kg, Max. Fork Height Options 2500 to 3500mm

Model: PEPI-4860

From £8,228.75

Pfaff "Parking Brake" Pallet Truck. Forks 1150mm x 540mm - 2500kg

Pfaff Silberblau HU 25-115 FBTP pallet truck with service and parking brake and Forks 1150mm x 540mm.

Model: HU 25-115 FBTP / PP-3167

From £807.50

Pfaff "LB" Manual Spur Gear Hand Winch

150kg to 1200kg galvanised or stainless steel base mounted wire rope hand winches.

Model: Pfaff LB / PRW-3151

From £204.20

The friction disk brake equipped with a shuttle valve on our wire rope winch prevents from unintentional lowering of the load in every position. The galvanized wire rope winches with tension loads of 150kg, 350kg, 650kg, 900kg, 1200kg have been galvanized in order to improve corrosion protection.

Pfaff "SW-W (SG)" Aluminium Wall Mounted Winch

Light-duty 125kg side mounted aluminium wire rope hand winch with removeable crank handle.

Model: SW-W (SG) / PWRW-3152

From £217.57

Pfaff SW-W (SG) light-duty manual wall-mounted 125kg wire rope winches are supplied with a removable crank, inside brake spring retention and aluminium housing. Particularly suited to industrial use, plant construction and agriculture as they are robust and well engineered. We can also supply you with a safety lock-off removable hand crank.

Pfaff "SW-W Alpha" Wall Mounted Winches - Range from 300kg to 1000kg

Pfaff Alpha spur wheel wall mounted wire rope winches with a zinc-plated or galvanised finish and load capacities of 0.3 tonne to 1 tonne

Model: SW-W Alpha / PA-3153

From £457.45 The ALPHA is so versatile, smooth running and safe in handling that nearly no one in wholesale, mechanical engineering or agriculture is willing to dispense with it. A toothed spur wheel back gear, low net weight and compact design makes this winch meet every requirement. Easily mounts onto the wall with rope output possible in every direction.

Pfaff "SW-W-SGO" Wall Mounted Worm Gear Winch

250kg to 5000kg worm gear heavy-duty steel side-mounting manual hand winches.

Model: SW-W-SGO / PW-3154

From £501.75

Strength is easy to prove: For the lifting and lowering of loads our hand manual wire rope winch with worm gear and additional friction disk brake is mounted onto the wall and takes up to 5 tons tension loads. Winch housing and rope drum is made of robust steel plate. Sizes from 2 tons upwards are equipped with an additional speed increasing ratio used for overdrive.

Pfaff "SW-KAL" (CG) Wire Rope Winch - Range from 750kg to 1120kg

Self-locking base mounted worm gear wire rope winch.

Model: SW-KAL (CG) / PW-3156

From £590.05 The CG hand operated worm geared winches are suitable for lifting and pulling applications in exposed environments. Lifting capacities of 0.75 and 1.1 tonnes on first rope layer. Constructed from die-cast aluminium

Pfaff "SW-K Lambda" BGV C1 & DIN 56925 Compliant Console Mounted Hand Winch

300kg base mounting manual spur gear wire rope hand winches.

Model: Pfaff Lambda / PW-3157

From £1,767.46

Specially designed for moving loads over people, conforms to German safety standard BVG C1. This winch has a grooved drum and is driven by a single reduction pair of straight cut internal spur gears. The load is automatically held by a safety spring double brake system, each capable of holding the full load. For improved rope coiling, a spring loaded rope pressure drum is fitted. Winding on one layer only.

Pfaff "DSRB" Sheave Block for Wire Rope Guidance - Range from 700kg to 8000kg

Machined steel with sealed ball bearing pulley sheave blocks for BETA PROLINE and SILVERLINE electric rope winches.

Model: Pfaff DSRB / PS-3160

From £121.99

The dynamic all-rounder with variable rope and sheave diameters and cable deflections of up to 180° can move loads of up to 8 t with ease and absolute reliability. Typical for Pfaff-silberblau is the high standard of quality: With a sheave block for manual and powered operation, equipped with grease-filled, sealed ball-bearings as standard.

Pfaff DSRS Sheaves - Range from 800kg to 3800kg

Pfaff wire rope pulleys with sheave diameters from 145mm to 490mm and rope diameters from 5mm to 18mm.

Model: DSRS Sheaves / PS-3161

From £91.51

Pfaff "SW-K Gamma" and "AL" Console-Mounted Aluminium Hand Winches - Range from 200kg to 800kg

Wall, floor or ceiling mounted aluminium hand winches.

Model: Pfaff Gamma and AL / GAHW-3150

From £567.50 The wire rope winch GAMMA is a drum winch and is especially suitable for outdoor application. Winches with tension load of 500 kg and more are equipped with an additional speed increasing ratio for winding and unwinding the unloaded rope. The winch allows mounting in every position, can comfortably be operated from either end and is equipped with a removable crank. The spring retention is maintenance free.

Pfaff "Low Profile" Pallet Truck. Closed Height Only 51mm. Forks 540mm x 1150mm - 1500kg

Pfaff Silberblau HU 15-115 FTP pallet truck with low profile forks ideal for very flat pallets.

Model: HU 15-115 FTP / PP-3169

From £714.68 An especially low-profile design, this low pallet truck requires only minimal space when being moved up to very flat pallets. This highly manouverable standard pallet truck is available in a tandem version with convenient fork rollers made of polyamide and steering rollers made of polyurethane. Notable among its many outstanding features are, firstly, its suitability for use on sensitive floor coverings and, secondly, its quietness when moving.

Pfaff Proline Pallet Truck with Scales. Forks 1190mm x 560mm - 2000kg,

Pfaff Silberblau pallet truck with built-in scales (printer optional).

Model: HU W-20 P / PP-3170

From £2,032.67 This is how intelligent motion can be: The PROLINE pallet truck is a complex logistics module with functional intelligence. As an economy tool with integrated scales it saves you both time and costs in goods receiving, order compilation and shipping. The modern display shows you piece numbers, weights, dates and times whenever you need them. It also has a pre-programmed energy-saving mode which cuts in automatically. As a precision tool the PROLINE offers guaranteed maximum weighing accuracy with a tolerance of just +/- 0,1%, it comes with a rechargeable or exchangeable high-performance rechargeable battery for a reliable power supply.

Pfaff Hydraulic Hand Stackers - 500kg or 1000kg Lifting Capacities, 900mm or 1600mm Lift Height

Pfaff HV 0516, HV 1008, HV 1016 manual hydraulic hand stackers

Model: HV / PHHS-3181

From £1,201.30 This is our multi-purpose hand stacker unit: With its adjustable and removable forks you get the ideal tool for almost every application. Make only your choice between crane attachments, swivelling mechanisms for barrels, loading tables and all other useful accessories! You will surely find the ideal tool for your specific application! But there is one thing we can guarantee for the flexible HV 0516 due to its low weight and low roller friction. Its unrivalled maneuverability.

Pfaff HP Trolley Lift, 400kg Lifting Capacity, 1200mm Lift Height

Lightweight, sturdy and simple HP trolley lift

Model: HP Series / PHTL-3186

From £709.38

This mobile, sturdy and lightweight your personal "work-assistant" is ideal! Optimum lifting and transporting of all kinds of loads up to 400 kg and 1,2 m lifting height. Ensuring maximum stability the sturdy chassis is equipped with 2 fixed and 2 steering rollers and a wheel brake. Take your individual choice out of four models.

Pfaff "HX" Scissors Lift Trolleys, Range from 150kg to 750kg Lifting Capacity

HX150, HX300, HX500, HX750 and HX-D350 Scissor Lift Trolleys

Model: HX / PSLT-3187

From £415.03 Sturdy and exceptionally individual. The technical features of the HX-series do not only convince with its effortless lifting due to the hydraulic foot-pump but also with its adjustable hydraulic valve allowing the exact controlling of the lowering speed from the steering handle. There are four different models designed for fulfilling your individual lifting needs within lifting heights of 220 up to 1000 mm. Industry can benefit from a new set safety standard! The scissors lift trolleys offers both – safe operation and reliable cost-efficiency.

Pfaff STW-F Steel Jacks (Fixed Lifting Claw) - Range from 1500kg to 10,000kg

Quality steel jacks with fixed lifting claw.

Model: STW-F / PSJLC-3190

From £421.65 The steel jack is standard equipment for tool and machinery shops, contractors, shipyards, agriculture and workshops: our steel jack with fixed lifting claw can be delivered with different types of hand crank for lifting the jack shaft along the rack. It offers a very long service life due to its high quality spur gear, precise worked crank gear as well as additional worked pawl. The steel jack STW-F is a masterpiece of technique and price/performance ratio.

Pfaff STW-V Steel Jacks (Adjustable Lifting Claw) DIN 7355 - Range from 3000kg to 10,000kg

Steel Jacks with adjustable lifting claw.

Model: STW-V / PS-3191

From £644.41 Quality produced in series. In the steel jack with adjustable lifting claw our experience is shown in our technical competence. The crank handle – in different executions – moves the jack shaft at the rack. The toe height of the claw can be adjusted to the required mounting or maintenance application. Reliability and long service life can be guaranteed by the  high-quality spur gear and precision machined wear-resistant rack.