Weld-on “Swivel” Lifting Eyes and Welded Down Lashing Points

"Hack8" Weld on Lifting and Lashing Point. Eye Swivels/Pivots to the Load Direction - 1t to 20t

Weld On Lifting Point. Also commonly referred to as a pad-eye. Grade 8.

8-H08 Series / WOLA-4887

Yoke Weld on Lifting and Lashing Point with Spring. Eye Swivels/Pivots to the Load Direction - 1t to 10t

Weld-down lifting point. Also commonly referred to as a pad-eye. Grade 8, to BS EN1677-1+2

8-057 Type / WOLP-2827

This is our  weld on lifting and lashing anchorage point. A quality piece of lifting equipment.
Weld-on lashing points are commonly used for lashing materials onto vehicles when being transported on road, rail, airline etc.

Codipro "WE.DSR" & "WE.DSS" Double Articulated Weld-On Swivel Lifting Point. Capacities from 2000kg upto 10000kg

Welded mounting swivel hoist ring with 360° rotation and 180° pivot.

WE DSR / WE DSS / CDAW-4506

RUD "VLBS-P" Weld On Load Ring for Pipes, WLL 4.0 tonne

Load ring with captive spring for welding, especially for pipes and tubes.

RWOL-4980

RUD "VLBS-U-LT" Weld On Load Rings, for Low Temperatures, WLL Range from 2.5 tonne to 10 tonne

Rud 180° Pivoting Load Rings for Welding, for temperatures down to -45°C

VLBSULT / RWOL-4981

RUD "VRBS-FIX" Weld on Swivel Load Ring Lifting and Lashing Eye, WLL Range from 4.0 tonne to 100 tonne

Load ring for welding for circumferential weld seam

Rud VRBS FIX / RWDS-4988

RUD "VRBK-FIX" Weld on Corner Swivel Load Ring Lifting & Lashing Eye, WLL Range 4.0 tonne to 50.0 tonne

Load ring for welding for 90°corners

RWDC-4987

RUD "VLBS" & "VLBSU" Weld On Load Rings, Swivel Lifting Eye, WLL Range from 1.5 tonne to 16 tonne

180° Pivoting Load Rings for Welding

RUD VLBS / VLBS-U / WOLR-48

The load ring, ready for welding, VLBS / LBS is prepared for the direct welding at the transport goods. The welding block (made of easy weldable material 1.0577+N St. 52-3) has been provided with distance nabs as gap indication for the weld and stamped with the WLL identification number. The load bracket can be tilted by 180°, made of high-tensile material, 100% crack detected and thus overall loadable. By a protected spring, the suspension bracket can be maintained in every position; the parts are connected with each other in an unloosable way.

RUD "WPPS" Weld Down Swivel Lifting Point, Clevis Connector Fitted With Lifting Hook, WLL Range from 0.63 tonne to 8.0 tonne

RUD WPPS Weldable Swivel Lifting Points.

RUD WPP-S / WDLP-51

Lifting points for welding with a universal connection for every slinging means (hook and ring assemblies, endless sling chains, round slings, loops, etc): Provided with a double ball-bearing which enables jerk - free tilting, swivelling and turning.
The optimised design avoids the damaging of both the slinging means and the precious load when swivelling. Version WPP-S:

Crosby 'S265' Weld-On Pivot Link Load Ring. Lifting or Lashing Eye, WLL Range from 1000kg to 15,000kg

Crosby Weld-On Pivot Link.

Crosby S-265 / WPL-2448

Gunnebo "WLP" Weldable Lifting Point, Range from 2500kg to 16,000kg

Alloy Steel weld on pivot link lifting / lashing point.

GWWL-4236