LIFTINGSAFETY
Camlok "TSZ" Two-Way Pulling Screw Clamp Range 500kg to 7500kg

Camlok "TSZ" Two-Way Pulling Screw Clamp Range 500kg to 7500kg

With two lifting points

Model: 

CTTP-4309

Camlok "TSZ" Two-Way Pulling Screw Clamp Range 500kg to 7500kg

Camlok Tsz Two Way Screw Clamp Screw Clamp Top Lift Screw Clamp Side Lift

Used on all structural steel plates and sections up to a surface hardness of 300 Brinell.

Camlok Screwcam Pulling Clamps are primarily used as anchor points to allow fabrications to be pulled together and positioned during assembly or prior to welding. The clamps are attached by turning the screwed threaded axle. The TSD, TSH and TSZ have a cam pad when a load is applied to the clamp the circular toothed pad pivots in a cam action, gripping the load.

Applications

The Camlok series of screwcam clamps can be used on all structural steel plates and sections up to a surface hardness of 300 Brinell. They offer an easy way of attaching pulling equipment to steel structures and can be used for holding and for the correction of alignment problems. This range of clamps is designed for pulling in three planes. The design allows for simultaneous loading in two directions but not for the transportation of plate.

This series of clamps can be used in any combination or number of combinations required they are available in various sizes, lifting capacities and cap sizes.

Technical Specifications

Part N° Model WLL (kg) Jaw Capacity (kg) Weight (kg)
4309-T22777 TSZ 500 500 0 - 28 3
4309-T22778 TSZ 1500 1500 0 - 35 5
4309-T22779 TSZ 3000 3000 0 - 35 9
4309-T22780 TSZ 5000 5000 0 - 40 16
4309-T22781 TSZ 7500 7500 0 - 40 21
Tsz Dimensions
Model Plate (mm) Z A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) H (mm)
TSZ 500 0 - 28 83 125 26 95 43 35 16 12
TSZ 1500 0 - 35 99 158 35 120 60 50 24 16
TSZ 3000 0 - 35 120 195 46 120 67 60 34 17
TSZ 5000 0 - 40 150 230 55 150 85 75 40 18
TSZ 7500 0 - 40 162 240 65 150 92 80 50 23
Part N° Model WLL (kg) Jaw Capacity (kg) Weight (kg) Unit Price Quantity
4309-T22777 TSZ 500 500 0 - 28 3 £ 442.87
4309-T22778 TSZ 1500 1500 0 - 35 5 £ 527.72
4309-T22779 TSZ 3000 3000 0 - 35 9 £ 640.43
4309-T22780 TSZ 5000 5000 0 - 40 16 £ 1145.60
4309-T22781 TSZ 7500 7500 0 - 40 21 £ 1279.52
   
Description

+

Used on all structural steel plates and sections up to a surface hardness of 300 Brinell.

Camlok Screwcam Pulling Clamps are primarily used as anchor points to allow fabrications to be pulled together and positioned during assembly or prior to welding. The clamps are attached by turning the screwed threaded axle. The TSD, TSH and TSZ have a cam pad when a load is applied to the clamp the circular toothed pad pivots in a cam action, gripping the load.

Applications

The Camlok series of screwcam clamps can be used on all structural steel plates and sections up to a surface hardness of 300 Brinell. They offer an easy way of attaching pulling equipment to steel structures and can be used for holding and for the correction of alignment problems. This range of clamps is designed for pulling in three planes. The design allows for simultaneous loading in two directions but not for the transportation of plate.

This series of clamps can be used in any combination or number of combinations required they are available in various sizes, lifting capacities and cap sizes.

Technical Specifications

Part N° Model WLL (kg) Jaw Capacity (kg) Weight (kg)
4309-T22777 TSZ 500 500 0 - 28 3
4309-T22778 TSZ 1500 1500 0 - 35 5
4309-T22779 TSZ 3000 3000 0 - 35 9
4309-T22780 TSZ 5000 5000 0 - 40 16
4309-T22781 TSZ 7500 7500 0 - 40 21
Dimensions

+
Tsz Dimensions
Model Plate (mm) Z A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) H (mm)
TSZ 500 0 - 28 83 125 26 95 43 35 16 12
TSZ 1500 0 - 35 99 158 35 120 60 50 24 16
TSZ 3000 0 - 35 120 195 46 120 67 60 34 17
TSZ 5000 0 - 40 150 230 55 150 85 75 40 18
TSZ 7500 0 - 40 162 240 65 150 92 80 50 23
Pricing

+

Products of Possible Interest

For side load applications where conventional clamps are unsuitable.
Riley Superclamp "USC" Universal Beam Clamp for use Vertical or Horizontal Applications - Range from 2032kg to 10000kg
With Alloy Safety Shackle Pulling up to 180 degrees
Camlok "TSH" Swivel Hook Screw Pulling Clamp Range 750kg to 5000kg
Suitable for use in positioning & turning steel plates and sections. Not to be used as a lifting clamp.
Crosby 'IPSC10' Screw Style Clamp, WLL Range from 1500kg to 3000kg
Contact Us About This Product

LiftingSafety uses cookies to improve your user experience,
To accept this, please click the 'accept' button below.

Find out more