-
Lifting Equipment
Lifting Equipment
- Chain Hoists
-
Wire Rope Hoists & Winches
- Hand Operated Wire Rope Winches and Hoists
- Cable Pullers / Hoists, Wire Rope Manual Operation
- Electric Winches and Hoists, AC (Mains Powered)
- Scaffold Hoists & Accessories
- Overhead Wire Rope Crane Hoists
- Hydraulic Wire Rope Winches & Hoists
- Pneumatic Wire Rope Air Winches / Hoists (Lifting and Pulling)
- Vehicle Mounted Winches
- Tractel Wire Rope & Accessories
-
General Lifting Equipment
- Lifting Slings and Components
- Lifting Shackles
- Eye Bolts and Nuts
- Weld-on Lifting Eyes and Lashing Points
- Lifting & Pulling Clamps
- Lifting Beams & Spreader Beams
- Precast Concrete Lifting
- Lifting Magnets, Permanent, Battery Electric and Manual
- Runway Beam Monorail Crane Trolleys, Push, Geared & Electric
- Equipment Identification Tags
-
Rigging Equipment
- Master Ring & Load Suspension Eyes
- Lifting & Rigging Hooks
- Turnbuckles & Rigging Screws
- Wire Rope Accessories and Fittings
- Snatch Blocks, Sheave Blocks and Crane Pulley Blocks
- Pulley Sheaves
- Lifting & Rigging Swivels - Eye, Hook & Shackle
- Load Restraint Equipment
- General Rigging Accessories
- Crosby Lifting & Rigging
-
Cranes & Gantry Systems
- Portable Davit Arms and Jib Cranes
- Swing Jib Cranes - Installed Floor & Wall Cranes
- Portable/Mobile Free-standing Swing Jib Cranes
- Aluminium Gantry Cranes
- Steel Gantry Cranes
- Fixed Steel Gantry Systems
- Shearlegs, Tripods & Quadpods
- Overhead Crane Systems
- Portable Shop-Floor/Workshop/Garage Cranes
- Counterbalance Floor, Workshop Cranes
- Scaffolding Runway Beam Systems
-
Material Handling & Jacking Equipment
- Machinery & Load Moving Skates
- Hydraulic Cylinders & Pumps
- Lifting Jacks
- Manhole Cover Lifters
- Hydraulic Pull Cylinders
- Hand Operated Pallet Trucks, Pump Trucks
- Stacker Trucks, Materials Lifts, Manual and Electric
- Genie and Counterbalance Materials Lifters
- Scissor Lift Tables
- Drum Handling Equipment
- Crane Forks
- Load Weighing Equipment - Load Cells
- Tool Spring Balancers / Load Balancers
- Platform Trucks & Trolleys
-
Forklift Truck Attachment
- Fork Mounted Man Riding Baskets
- Environment & Waste Handling Attachments
- Fork Lift Truck Mounted Drum Handling Attachments
- Fork Mounted Jib and Hook Attachments
- Fork Truck Booms & Tines
- Stainless Steel Forklift Attachments
- Forklift Truck Fork Extensions
- Multi Fork Attachments
- Fork Truck Scoop Attachments
- Big Bag Fork Truck Attachment
- Closed Base Coil Support Attachments
- Forklift Fork Protection Sleeves
- Snow Plough Fork Lift Truck Attachments
- Other Forklift Truck & Telehandler Attachments
- Specialist Lifting Equipment
- Access and Safety Related
- Workshop and Shop Floor
- Screwjacks & Actuators
-
Height Safety
Height Safety Equipment
-
Fall Arrest and Height Safety Harnesses
- General Use Harnesses EN361
- Work Positioning Harnesses EN361 & EN358
- Rope Access Harnesses
- Rescue Harnesses EN1497 & EN361
- Ladies & Childrens Harnesses
- Hi Vis Jacket/Vest Harnesses
- Welders Harnesses
- ATEX (Anti-Static) Harnesses
- Linesman Harnesses
- Oil Derrick Harnesses
- Sport Climbing Harnesses
- Tree Surgeon Positioning Harnesses
- Sit and Chest Harnesses. EN361 EN356 & EN831
- Work Positioning & Restraint Belts EN358
- Fall Arrest, Restraint and Positioning Lanyards
- Height Safety and Fall Arrest Kits
- Inertia Reels and Retrieval Blocks
- Man-riding Hoists & Rescue Winches
-
Fall Arrest & Man-riding Systems
- Fall Arrest Davit Arms & Posts for Working at Height
- Sala Advanced Davit Arm Systems and Components
- Xtirpa Confined Space Davit Arm Systems and Components
- Abtech Man-riding, Fall Arrest and Rescue Davits and Components
- Man-riding & Rescue Tripods & Quadpods
- Manriding Systems, Baskets and Chairs
- Mobile Fall Arrest Gantries, Systems & Steps
- Rope Guided Fall Arresters (Steel & Synthetic Rope)
- Temporary Horizontal Fall Arrest Lifelines
- Vertical Fall Arrest Systems Permanently Installed
- Horizontal Fall Arrest Systems Permanently Installed
- Manriding Baskets Fork Truck and Overhead Crane
- Tank Side Entry and Vehicle Fall Arrest Systems
- Suspension Seats / Bosuns Chair Working at Height
- Collective Fall Arrest Systems
- Man-Riding Sheave Blocks
- Anchorage Devices
- Karabiners & Connectors
- Rescue, Evacuation & Rope Access
-
General Height Safety Gear
- Height Safety Accessories
- Industrial & Climbing Height Safety Helmets
- Synthetic Height Safety Rope & Anchorage Lines
- Height safety Pulley Wheels For Synthetic & Steel Wire Rope
- Black Height Safety Equipment & PPE
- Hot Work Equipment. Cutting, Grinding & Welding
- Cases, Bags, Backpacks, Holdalls. Height Safety Gear
- Telescopic Extension Pole for Height Safety Applications
- Wind Energy Height Safety Equipment
- Stainless Steel Fall Arrest Equipment
-
Fall Arrest and Height Safety Harnesses
- Home
- About Us
-
Contact
Get In Touch
- Home/
- Lifting Equipment/
- Wire Rope Pulling Winches & Lifting Hoists/
- Hand Operated Wire Rope Winches and Hoists/
- Gebuwin Hand Winches/
- Gebuwin "TC Series" Hand Operated Spur Gear Winch, Range from 1000kg to 1500kg
Gebuwin "TC Series" Hand Operated Spur Gear Winch, Range from 1000kg to 1500kg
Spur gear free spool hand winch for lifting/hoisting and pulling. Optional painted/stainless steel finish and Atex rating.
TC Series / GSGW-4763
These winches are used for both hoisting and pulling of loads. They are equipped with a cable drum free spool, making it possible for the cable to be easily pulled from the drum, due to the fact that the cable drum can be detached from the transmission. As well as this, these winches can be mounted in such a way that allows for the cable to come free from the winch horizontally.
The Gebuwin TC range of hand driven spur gear winches are known for their robust construction. The listed capacities refer to the hoisting capacities which are calculated according to the first cable layer on the cable drum. In the case of these winches being used for the pulling of loads, the hoisting capacity should be multiplied roughly by a factor of 2.5.
The spur gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. Due to the minimal friction loss in the transmission, the spur gear winches have a high performance efficiency. These spur gear winches have a sealed spur gear casing. With the painted range, most parts are made from steel and have been either painted or zinc plated. With the Stainless Steel range, the parts are made from stainless steel, excepting for the inner parts within the spur gear casing.
Product Features
- Robust and safe hoisting or pulling winch with Free Spool.
- Pulling capacity is approx. 2.5x hoisting capacity.
- Static safety factor of 4 .
- Load pressure brake with double ratchet system.
- Maintenance-free bearing.
- Adjustable crank from 250 to 350mm.
- Ergonomic grip.
- Cable outlet to left, right, and top side.
- Paint thickness is 60 - 80 Micron in 1 layer (in compliance with DIN/ISO 12944, C1M). Winch: Grey (RAL 7035), Drum: Black (RAL 9005).
- Closed gearbox.
- In compliance with EN 13157 and DIN 15020 and EX types ATEX 114 (94/9/EG).
- Also available with multiple compartment cable drum, and ATEX certified.
Technical Specifications
Model | TC1000 | TC1500 |
Capacity: 1st Cable Layer | 1000kg | 1000kg |
Capacity: Last Cable Layer | 614kg | 927kg |
Crank force 1st Cable Position | 11daN | 12daN |
Hoisting Length by one rotation of crank (1st Layer) | 20mm | 14mm |
Cable Capacity | 33m | 21m |
Cable Dia. (EN 12383-4) | 8mm | 10mm |
Min. Breaking Load Cable | 34kN | 51kN |
Mounting | Console, 4 x M12 Class 8.8 | Console, 4 x M12 Class 8.8 |
Weight | 27kg | 27.5kg |
Dimensions
Pricing
These winches are used for both hoisting and pulling of loads. They are equipped with a cable drum free spool, making it possible for the cable to be easily pulled from the drum, due to the fact that the cable drum can be detached from the transmission. As well as this, these winches can be mounted in such a way that allows for the cable to come free from the winch horizontally.
The Gebuwin TC range of hand driven spur gear winches are known for their robust construction. The listed capacities refer to the hoisting capacities which are calculated according to the first cable layer on the cable drum. In the case of these winches being used for the pulling of loads, the hoisting capacity should be multiplied roughly by a factor of 2.5.
The spur gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. Due to the minimal friction loss in the transmission, the spur gear winches have a high performance efficiency. These spur gear winches have a sealed spur gear casing. With the painted range, most parts are made from steel and have been either painted or zinc plated. With the Stainless Steel range, the parts are made from stainless steel, excepting for the inner parts within the spur gear casing.
Product Features
- Robust and safe hoisting or pulling winch with Free Spool.
- Pulling capacity is approx. 2.5x hoisting capacity.
- Static safety factor of 4 .
- Load pressure brake with double ratchet system.
- Maintenance-free bearing.
- Adjustable crank from 250 to 350mm.
- Ergonomic grip.
- Cable outlet to left, right, and top side.
- Paint thickness is 60 - 80 Micron in 1 layer (in compliance with DIN/ISO 12944, C1M). Winch: Grey (RAL 7035), Drum: Black (RAL 9005).
- Closed gearbox.
- In compliance with EN 13157 and DIN 15020 and EX types ATEX 114 (94/9/EG).
- Also available with multiple compartment cable drum, and ATEX certified.
Technical Specifications
Model | TC1000 | TC1500 |
Capacity: 1st Cable Layer | 1000kg | 1000kg |
Capacity: Last Cable Layer | 614kg | 927kg |
Crank force 1st Cable Position | 11daN | 12daN |
Hoisting Length by one rotation of crank (1st Layer) | 20mm | 14mm |
Cable Capacity | 33m | 21m |
Cable Dia. (EN 12383-4) | 8mm | 10mm |
Min. Breaking Load Cable | 34kN | 51kN |
Mounting | Console, 4 x M12 Class 8.8 | Console, 4 x M12 Class 8.8 |
Weight | 27kg | 27.5kg |
Dimensions
Products of Possible Interest
Contact Us About This Product
If you wish to receive a quote for this product, please use the tab above, this form is for general enquiries regarding this product only.
You can also Request a Quote using the Quote tab above!
You can easily add more than one item to the Quote Request. This is highly recommended as we will be able to suit your needs much more efficiently.