Rud "ACP-TURNADO" Swivel Lifting Point, Metric or UNC Threads, WLL Range 0.7 tonne to 16.0 tonne

• RUD’s ingenious spring mechanism.
• Higher working load limits (WLL) compared to hoist rings oft the same size.
• No kinking.
• 4:1 Safety Factor.
• Range of rotation 360°.
• Pivoting range suspension link 180°.
• Maximum operation temperature range WITHOUT reduction of WLL -40°–100°C.
• Maximum operation temperature range WITH reduction of WLL 350°C.
• Long length units come with nut and washer.

RUD’s ingenious spring mechanism.The Rud Turnado reacts actively and avoids self-contained the "worst-case-scenario" are with this high traverse loading. Its ingenious spring mechanism turns the lift ring automatically into the direction of an optimal force transmission. No tilting. No unintentional reverting.

Conventionally designed centre pull hoist rings favour kinking of the hook more likely. No proper position of the hook within the suspension ring, no optimal load force transmission. This status will be favoured especially by the following acts.

1. The lifting point does not automatically and safely turns in the direction of the load.
2. The hook cants at the inside profile of the suspension ring.

the ACP Turnado eliminates theses dangers completely. The intelligent spring mechanism make sure that the suspension ring turn optimal into the load force direction. The lift ring design guarantees a safe position of the hook without kinking. The result: The first hoist ring that insure no kinking!

Wear indicators, positioned at the critical points of the force transmission make it easy and quicker to identify whether the wear of the lifting point is still within the safe range or whether the lifting point is no loner safe to use.

To allow easy and clear reading of the most relevant information such as WLL, torque, dimension of the bolt etc. even under the toughest conditions, it is either stamper or embossed on into the surface of the lifting pint.

The bolt provides and in, and outside hexagon and is captive, but can be exchanged if necessary.

Dimensions & Specifications

Load Chart

Number of legs	1	1	2	2	2	2	2	3/4	3/4	3/4
Inclination angle <ß	0°	90°	0 °	90°	0-45°	>45-60°	Asymm.	0-45°	>45-60°	Asymm.
Factor	1	1	2	2	1.4	1	1	2.1	1.5	1
Safety factor 4:1	For max. total load in metric tons, bolted and adjusted to the direction of pull
ACP M12 1/2"	1.35	1.35	2.7	2.7	1.9	1.35	1.35	2.84	2	1.35
ACP M16 / 5/8“	2.5	2.5	5	5	3.5	2.5	2.5	5.25	3.75	2.5
ACP M20 / 3/4"	4	4	8	8	5.6	4	4	8.4	6	4
ACP M24 / 1”	6.3	6.3	12.6	12.6	8.8	6.3	6.3	13.2	9.5	6.3
ACP M30 / 1-1/4"	8	8	16	16	11.2	8	8	16.8	12	8
Safety factor 5:1	For max. total load in metric tons, bolted and adjusted to the direction of pull
ACP M12 / 1/2"	1.1	1.1	2.2	2.2	1.5	1.1	1.1	2.3	1.6	1.1
ACP M16 / 5/8"	2	2	4	4	2.8	2	2	4.2	3	2
ACP M20 / 3/4"	3.2	3.2	6.4	6.4	4.5	3.2	3.2	6.7	4.8	3.2
ACP M24 / 1”	5	5	10	10	7	5	5	10.5	7.5	5
ACP M30 / 1-1/4"	6.4	6.4	12.8	12.8	9	6.4	6.4	13.5	9.6	6.4