Camlok "CX" Heavy Duty Hinged Clamp - Range from 1500kg to 10,000kg

• 1500kg to 10,000kg options available.
• Used for all structural steel plates upto 300 Brinell / 32 Rockwell C.
• Handling of plates at any angle.
• Lifts single plate from the horizontal to the vertical and vice versa.
• Vertically racked plates can be turned over.
• Can be used on edge and side loads.
• Can be lifted with a reduction in the W.L.L.
• Designed and manufactured in the UK.

Clamp Information

The Camlok Series CX range of clamps has been developed especially for the handling of plate at any angle, thus permitting the lifting and handling of awkward shaped plate and fabrications. Single plates can be lifted from the horizontal to the vertical position and vice versa.

Vertically racked plates can be turned over due to the in-built lifting eye and link. Standard CX clamps are fitted with a cam operated closing mechanism that can if preferred be replaced with a chain pull open /close mechanism. Clamps are fitted with hardened serrated teeth, jaws and pads that are suitable for gripping steel plate up to a hardness of 300 Brinell.

Dimensions & Specifications

MODEL	WLL kg (Per Clamp)	Plate mm Z	Weight kg (Per Clamp)	A	B	C	D	E	F	G	H
CX1500	150-1500	0 - 20	7	140	399	63	48	70	83	12,5	63
CX3000	300-3000	0 - 32	12	197	515	67	68	93	110	19	67
CX3000L	300-3000	30 - 60	15	227	515	67	68	93	110	19	67
CX6000	600-6000	0 - 50	38	292	737	95	95	143	188	28	95
CX6000L	600-6000	50 - 100	48	342	785	98	115	143	188	28	98
CX8000	800-8000	0 - 50	39	292	737	98	95	143	210	28	98
CX8000L	800-8000	50 - 100	51	342	785	98	115	143	210	28	98
CX10000	100-10,000	0 - 50	61	360	903	110	125	162	223	33	110
CX10000L	100-10,000	50 - 100	76	410	921	112	168	162	223	33	112