Gebuwin B.V.

Lightweight (25kg) Steel Lifting Davit. 125kg to 500kg

Portable lightweight and quick assembly lifting davit arm with 360 degree rotation and built-in hand winch.

Model: SLWA-4736

Gebuwin "MR Marine Series" Hand Operated Worm Gear Winch

Stainless steel worm gear hand winch, suitable for sea water and chemical installation. 3000kg or 5000kg

Model: MR Series / GMWG-4750

A robust worm gear winch constructed with a fully covered gearing (IP 54).

The cable drum, the crank and all outgoing shafts are made of high quality 316 stainless steel. All fasteners are of A4 quality stainless steel. The surface treatment of the steel housing complies with the stringent paint specifications C5M according to DIN/ISO 12944.

Gebuwin WA200 GR/D Worm Gear Battery Driven Winch, 200kg

Gebuwin wall or floor mount worm drive winch, driven by a powered drill or cordless screwdriver.

Model: GBDW-4751

The hoisting capacity of the winch is 200kg which is calculated according to the first cable layer on the cable drum. The closed worm gear box has a transmission with a self braking capacity. This self braking capacity ensures a hold of the load at any required height during hoisting and lowering.

All rotating parts run in maintenance free bearings. The winch can be wall mounted or console mounted, and is available in grey/black paint.

Gebuwin "WW Series" Hand Operated Worm Gear Winch, Range from 250kg to 1500kg

Worm gear hand winch, with single or double drum. Optional painted/zinc plated finish and Atex rating.

Model: WW / GHOW-4752

The Gebuwin range of hand driven worm gear winches are known for their robust construction. The hoisting capacities are calculated according to the first cable layer on the cable drum.

Gebuwin "WW-D-FS / WW-D-FSB" Free Spool Hand Operated Worm Gear Winch, Range from 2000kg to 5000kg

Worm Gear Hand Winch for Lifting/Hoisting and Pulling, with Single or Double Drum, available with Optional Adjustable Friction Brake for Controlled Cable Unwinding and Optional Finish

Model: WW-D-FS / GHOW-4755

The Gebuwin range of hand driven worm gear winches are known for their robust construction. This range of winches are used for both hoisting and pulling of loads. These worm gear winches are equipped with a cable drum free spool, making it possible for the cable to be easily pulled from the drum, due to the fact that the cable drum can be detached from the transmission.

Gebuwin "WW-D" Hand Operated Worm Gear Winch, Range from 2000kg to 7500kg

Manual worm gear hand winch, with single or double drum. Optional finish and ATEX rating.

Model: WW-D / GHOW-4756

The winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The worm gear winches are more safe than the spur gear winches, due to the fact that 50% of the braking is done by the friction loss in the transmission. Subsequently, the load on the pressure brake is greatly reduced. Due to the higher friction loss in the transmission, the worm gear winches have a lower performance efficiency than the spur gear winches

Gebuwin Winch Power Tool

Pneumatic (air) or Electric (230v 1ph) Powered Drive Tool for use with Gebuwin Hand Winches

Model: GWPT-4757

This pneumatic auxiliary motor and electrical auxiliary motors are intended as an alternative to the manual drive and are only used for brief and non-frequent usage. The combination of manual winch and electrical or pneumatic auxiliary motor is not an alternative to an electrical driven winch.

Gebuwin TL150 Spur Gear Winch, Capacity 150kg

Manual spur gear lifting/hoisting winch with optional paint/zinc plated finish and Atex rating.

Model: TL150 / GSGW-4758

The Gebuwin range of hand driven spur gear winches are known for their robust construction. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. The winches have a static safety factor of minimum 4.

Gebuwin "TL" Spur Gear Wall Mount Winch, Range: 300kg to 600kg

Manual spur gear lifting/hoisting hand winch with optional paint/zinc plated finish and Atex rating.

Model: TL Series / GSGW-4760

The Gebuwin range of hand driven spur gear winches are known for their robust construction. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. The winches have a static safety factor of minimum 4.

Gebuwin "TL Series" Spur Gear Winch, Capacity 1000kg to 1500kg

Manual spur gear pulling and lifting/hoisting winch with optional paint/stainless steel finish and Atex rating.

Model: TL Series / GSGW-4762

The Gebuwin range of hand driven spur gear winches are known for their robust construction. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings.

Gebuwin "EWS" Electric Operated Worm Gear Winch, Range 125kg to 3200kg

Gebuwin Worm Gear Pulling / Hoisting Winch with Optional Power Supply, 230V or 400V

Model: EWS / GEWW-4782

Gebuwin "EP" Electric Planetary Gear Winch, Range 2000kg to 20,000kg

Gebuwin 400v Pulling / Hoisting Winch

Model: GPGW-4783

Gebuwin Theatre Winch - 300kg WLL

EN17206 certified manual hand winch designed for the theatre industry.

Model: TW300 / TW300L / GTW-5155

Gebuwin "E-Winch" Electric Winch

Newly developed electric pulling and lifting electric winch with a powerful three-phase motor, budget-friendly and strong in its work.

Model: E-Winch / GE-5174