Limited time offer, free carriage on all online orders!
*Minimum goods order value: £100, otherwise an admin fee of £25 will apply. Online orders are possible to UK Mainland only, but we export globally.
LIFTINGSAFETY

Ridgegear

Quick Ref: CN-2317

Layout

1

Ridgegear Defender fall arrest block with UHMWPE web lifeline and triple action karabiner lower connector. Top connector not included.

Model: RGA3.3 WEB DEF / RFAB-4748

£234.40
Sale
£135.96
2

Two point safety harness with fast fit buckles, shoulder and leg comfort pads, rear D and chest mounted front D-link connection point.

Model: RGH2 Deluxe / R-5484

£123.97
Sale
£71.91
3

Two point safety harness fitted with shoulder comfort pads, rear D and chest mounted front D-link connection point.

Model: EN 361:2002 / R-5482

£100.00
Sale
£58.00
4

Premium Y-shaped rope access harness with support pads on the legs, waist and shoulders. 6 built-in tool loops.

Model: RGH17 / RRAH-5481

£333.50
Sale
£250.13
5

Ecofriendly two point safety harness produced from upcycled PET bottles, fitted with a rear dee and a chest mounted front dee.

Model: RGH2 Eco / R-5480

£69.00
Sale
£40.02
6

Two point Y-shaped safety harness is a unisex design with both rear and front attachment points.

Model: RGH3 / RUSH-5479

£81.16
Sale
£58.44
7

Lightweight sit harness designed for climbing, with a colour coded right leg webbing to easily distinguish between two sizes.

Model: RGH12 / RRAS-5313

£52.60
Sale
£30.51
8

Manual rescue winch featuring an up/down clutch locking mechanism and an energy absorbing unit for additional safety.

Model: RGR7 / RRMH-5018

£1,552.38
Sale
£900.38
9

High visibility & luminous confined space safety harness with rescue strap. 2 phosphorescent stripes and 2 reflective stripes.

Model: RGH5 Super Glow / GITD-4871

£133.73
Sale
£77.56
10

Ridgegear rescue system with rescue device, anchorage sling, rescue pole & carry bag.

Model: RGR14 Ridge Rescue / RRRK-4749

£2,096.38
Sale
£1,215.90
11

Hi-vis orange two point safety harness with reflective yarn, fitted with a rear D and a chest mounted front D. Optional fast fit buckles.

Model: RGH2 Glow / RRHV-5485

£67.46
Sale
£39.13
12

Lightweight and compact fall arrest block with galvanised wire lifeline. Swivel lower karabiner. Top connector not included.

Model: RGA3.3, RGA6, RGA9 & RGA20 DEF / RDFA-4747

£333.10
Sale
£193.20
13

Single leg web lanyard with built-in shock-pack for fall arrest.

Model: RGL13 / RAFL-3857

£71.55
Sale
£41.50
14

Rope grab designed to provide vertical fall protection to operatives ascending/ descending a ladder or structure, or to provide a work positioning/restraint solution.

Model: RGA14 / RARG-3796

£137.54
Sale
£79.78

Ridgegear RGA14 Guided Fall Arrester Aluminium Rope Grab is designed to provide either fall arrest or restraint protection depending on which system is specified. Also currently used in the rope access industry. The RGA14 is for use with 10.5 - 12mm kernmantle rope.

15

Pole strap with specially designed controlled release adjuster buckle to ensure safe operation and adjustment.

Model: RGP11 / RUMPP-3788

£155.99
Sale
£90.48
16

Wire rope multi purpose work-postioning device with poly outer sheath for protection.

Model: RGP4/6 / RWPS-3787

£149.50
Sale
£86.71

The RGP4 is a multi purpose work positioning device, designed to be clipped to the side D's of a harness, work positioning belt or be used independently.

17

Suspension trauma safety steps which help prevent the effects of toxic shock caused by prolonged suspension after a fall.

Model: RGK42 / RTS-3786

£25.30
Sale
£14.68

This eases the discomfort to the user whilst suspended from a lanyard after a fall. The leg straps of a conventional harness do not prevent the webbing straps from cutting into the groin area during suspension, and loss of circulation to the legs and feet is often likely. This can be fitted to all Ridgegear harnesses.

18

Triangular manual screwgate delta link, semi-permanent connector. 27kN minimum breaking strength.

Model: RGK12 / STSGK-3780

£10.20
Sale
£5.92

The true industrial connector, the RGK12 is normally used on the operatives’ end of a shock pack or lanyard. This provides a semi-permanent connection to the fall arrest equipment. This item has many applications in the rope access and leisure industries. With a 10mm gate opening.

19

Aluminium automatic double action scaff hook with captive eye. Designed to be a permanent lanyard fixture. 23kN minimum breaking strength.

Model: RGK11 / ADASH-3779

£32.01
Sale
£18.57

The RGK11 is a large gate opening, aluminium captive eye karabiner, normally fitted to fall arrest lanyards for quick clipping. The double action snap closure on this device means that it cannot be accidentally opened but allows for speedy one handed operation. With a 60mm gate opening. Accredited to EN362.

20

Steel automatic snap hook with captive eye. Designed to be a permanent lanyard fixure. 23kN minimum breaking strength.

Model: RGK10 / SDASH-3778

£11.76
Sale
£6.82

The gate opening of the RGK10 means that this item is normally used for clipping directly on to a D ring on a harness. Usually fitted to fall arrest blocks or fixed lanyards. The double action snap closure on this device means that it cannot be accidentally opened. Accredited to EN362.

21

Aluminium automatic double action scaff hook with captive eye. Designed to be a permanent lanyard fixture. 27kN minimum breaking strength.

Model: RGK11/LSH / ADAS-5496

£140.00
Sale
£109.20
22

Premium Y-shaped work positioning harness with support pads on the legs, waist and shoulders. 2 built-in tool loops.

Model: RGH7 / RMH-5517

£258.20
Sale
£149.76
23

Short lanyard specifically designed for ladder restraint when a shorter lanyard is required. The two attachments points allow length adjustment.

Model: RGL31 / LRSL-5504

£63.45
Sale
£36.81
24

Two leg 11mm kermantle rope lanyard for fall arrest with a choice of connectors.

Model: RGL8 / RTLL-5503

£88.63
Sale
£51.40
25

Single leg non-adjustable 11mm kernmantle rope restraint lanyard with a wide variety of connector options.

Model: RGL5R / SLRR-5502

£28.37
Sale
£16.45
26

Aluminium automatic double action scaff hook with captive eye. Designed to be a permanent lanyard fixture. 23kN minimum breaking strength.

Model: RGK88 / ADAS-5501

£52.58
Sale
£30.50
27

Aluminium body, steel gate snaphook with captive eye for permanent connections. 23kN minimum breaking strength.

Model: RGK50 / AASD-5500

£45.63
Sale
£26.47
28

Steel automatic snap hook with swivelling captive eye. Designed to be a permanent fixure. 23kN minimum breaking strength.

Model: RGK45 / SSDA-5499

£25.21
Sale
£14.62
29

Automatic aluminium tri-action swivel twist lock hook connector with a 30kN minimum breaking strength. Designed to be a permanent lanyard fixture.

Model: RGK44 / SATA-5498

£39.83
Sale
£23.11
30

Super lightweight aluminium automatic double action scaff hook with captive eye. Designed to be a permanent lanyard fixture. 25kN minimum breaking strength.

Model: RGK11SL / ADAS-5497

£37.78
Sale
£21.92
31

Aluminium scaffold hook style automatic twist lock karabiner with a 23kN minimum break strength. Optional captivating pin supplied as standard.

Model: RGK6 / ALGK-3774

£61.11
Sale
£35.45

The RGK6 is a lightweight version of the RGK5. This device can be fitted to fall arrest lanyards, but is normally seen connected to ropes and used with rope grab systems to provide vertical protection. Used throughout the industry as part of a protection system on portable ladders. It also has a removable pin to enable retro fitting to lanyards. With a 53mm gate opening. Accredited to EN362.

32

Aluminium manual screw gate connector with wide load bearing design and side-swing gate. 22kN minimum breaking strength.

Model: RGK7 / ASHK-5495

£22.42
Sale
£13.00
33

Aluminium automatic tri-action twist lock connector with a 24kN minimum breaking strength.

Model: RGK1/AT / ATAK-5494

£21.95
Sale
£12.74
34

Aluminium manual screw gate connector with a 24kN minimum breaking strength.

Model: RGK1A / ASK-5493

£16.86
Sale
£9.78
35

Steel manual screwgate delta link, semi-permanent connector. 45kN minimum breaking strength.

Model: RGK20 / SSGD-5492

£13.90
Sale
£8.06
36

Steel automatic tri-action twist lock connector that is designed to be a permanent lanyard fixture. 45kN minimum breaking strength.

Model: RGK19 / STAK-5491

£44.16
Sale
£25.62
37

Steel automatic tri-action twist lock connector that is designed to be a permanent lanyard fixture. 45kN minimum breaking strength.

Model: RGK18 / STAK-5490

£44.16
Sale
£25.62
38

Steel automatic tri-action twist lock connector with a 40kN minimum breaking strength.

Model: RGK15 / STAK-5489

£33.74
Sale
£19.57
39

Steel automatic twist lock connector with a 25kN minimum breaking strength.

Model: RGK2P / TLKW-5488

£14.20
Sale
£8.24
40

3 point safety harness fitted with front, rear and right-hand side shoulder rescue attachment points. Optional fast fit buckles.

Model: RGH5 / RTPF-5486

£69.23
Sale
£40.16
41

Same as RGA4 though fitted with side / steady handle for when not solid mounted (to tripods, gantry etc..) retrieval block fitted with a up and down winch. Conforms to EN360 & EN1496

Model: RGA4H / MFAB-3699

£1,332.37
Sale
£772.78

Ridgegear 15 metre Fall Arrest and Rescue Block With steady Handle has the benefit of an additional steadying handle. Like the RGA4, the RGA4H is a three way retrieval block fitted with an up/down winch mechanism and the standard fall arrest capability. This handle facility is most usefull when not solid mounted to a tripod or other structure. This unit can be used as a standard fall arrest block, but in the event of a fall, the operative can be winched up or down to safety almost immediately. Available in either Galvanised steel wire rope or Stainless steel wire rope.

42

Fixed length single leg web lanyard with built-in shock-pack for fall arrest.

Model: RGL1 / WLASA-3735

£60.69
Sale
£35.20
43

Kinetic expanding fall arrest lanyards with a choice of connectors.

Model: RGL20 / KFAL-3734

£66.11
Sale
£38.35
44

Scaffolders Kit Accredited to: EN361, EN354 and EN355.

Model: RGHK2 / SK-3731

Request Quote

This complete harness safety kit is specifically designed with the scaffolder's in mind. The kit comprises of our famous RHG2 front and rear "D" harness and a RGL1 1.8m lanyard which comes complete with our ultra lightweight RGK11 karabiner. This kit can also be supplied in a strong case of a top quality rucksack. Accredited to: EN361, EN354 and EN355. Web material: 45mm water repellent polyester Weight: 1.15kg (harness only). Features: Front and rear attachment points. Special feature: Rip stitch fall indicator.

45

Basic two-point harness kit with fall arrest lanyard and 2 standard steel screwgate karabiners.

Model: RGHK1 / RBK-3730

Request Quote
46

Step-in Y-shaped comfort harness with support pads on the legs, waist and shoulders. Two tool loops.

Model: RGH16 / MTH-3710

£251.31
Sale
£145.76

Ridgegear RGH16 Multi Task Harness is a further innovation of the Ridgegear range of safety harness. For fall arrest the harness comprises front and rear D rings. In addition there is the added benefit of 2 side D work positioning D rings on a comfortable support pad, and a further ventral front D ring positioned at the waist for sit suspension and / or work positioning. Leg straps are opened using lightweight adjustable quick click buckles, which allow for easy and quick step-in facility. Comfort leg pads are also provided.

47

4 point harness fitted with front, rear and side attachment points on a comfortable work positioning belt. Optional fast fit buckles.

Model: RGH4 / R4PH-3705

£114.75
Sale
£66.56

Ridgegear RGH4 4 Point Harness includes all of the features of the RGH1-3 harnesses, (see data sheets).This comfortable harness is designed for operatives who spend a lot of time working at height and in exposed areas. The harness is fully adjustable and is fitted with rip stitch indicators. The ring connection between the chest & the shoulder straps, ensure no stress loading when force is applied the front dee ring.

48

Two point safety harness fitted with a rear D-ring and a chest mounted front D. Optional fast fit buckles.

Model: RGH2 / RTPH-3703

£56.72
Sale
£32.90

Ridgegear RGH2 Two Point Harness is the workhorse of the industry. The harness is fitted with a rear dee and a chest mounted front dee. This harness can be used similar to the RGH1 but has the added feature of the front dee ring to extend the working capability of the harness. The harness is fully adjustable and  lightweight and is fitted with rip stitch indicators. The ring connection between the chest & the shoulder straps, ensure no stress loading when force is applied the front dee ring.

49

Basic access harness with a rear D-ring only. Used primarily with a fall arrest lanyard or inertia reel block.

Model: RGH1 / SPH-3702

£54.93
Sale
£31.86

The RGH1 Single Point Harness is a basic access harness fitted with a rear dee only. This harness is used primarily with a fall arrest lanyard to provide an operative with basic fall protection. The harness is fully adjustable and lightweight and is fitted with rip stitch indicators.

50

6m multi purpose Retractable "self retracting lifeline" (SRL) fall arrest block with fall indicating connector. Conforms to EN360.

Model: RGA26 / R6LFAB-3701

£560.63
Sale
£325.17

Ridgegear 6m lightweight Fall Arrest Block is a lightweight and small multi purpose fall arrest block, which allows uninhibited movement during normal working activity. For self-connecting to the block, it is recommended that the operative uses an extension strop (RGL4) in order to ease the task. The cable can come in two different types - either 5mm Galvanized steel wire rope, or can come in 5mm stainless steel.

51

Fixed length single leg kernmantle synthetic rope lanyard with shock pack for fall arrest.

Model: RGL2 / RKL-3736

£64.77
Sale
£37.57
52

Retractable "self retracting lifeline" (SRL) three way retrieval block fitted with an up/down winch mechanism and the standard fall arrest capacity.Conforms to EN360 & EN1496

Model: RGA4 / WFAB-3698

£1,256.38
Sale
£728.70
Ridgegear 15 metre Wire Fall Arrest and Rescue Block is a three way retrieval block fitted with an up/down winch mechanism and the standard fall arrest capability. This unit can be used as a standard fall arrest block but in the event of a fall, the operative can be winched up or down to safety almost immediately.
Specifications Accredited to: EN 360 and EN 1496 A&B Cable spec: 15 x 5 galvanised steel wire rope (also available with stainless steel wire) Connector: Double action, high tensile steel alloy Weight: 11.35 Features: Fall indicating connector, retrieval system Size mm: L 340 x W258 x D 80 Max arrest force <6kN Approx arrest distance: 0.5m. Available with either a Galvanised steel wire rope or Stainless steel wire rope.
53

15 metre Retractable "self retracting lifeline" (SRL). Conforms to EN360.

Model: RGA3 / MFAB-3697

£872.03
Sale
£505.78

Ridgegear RGA3 15 Metre Wire Fall Arrest Block is a robust fall arrest block with a long working length and heavier construction. The carrying handle is part of the cast alloy housing and can be connected to the anchorage point using soft slings or a Karabiner. The RGA3 has a working length of 15 metres with the availability to come with 5mm Galvanised steel wire rope or 5mm Stainless steel.

54

Retractable "self retracting lifeline" (SRL). Fall arrest block 10m 5mm galvanised steel cable,(available in stainless) EN360 (fall arrest)

Model: RGA2 / RFAB-3696

£680.28
Sale
£394.56

Ridgegear 10m Fall Arrest block is a multi purpose fall arrest block, which allows uninhibited movement during normal working activity. The carrying handle is part of the cast alloy housing and can be connected to the anchorage point using soft slings or a karabiner. For self-connecting to the block, it is recommended that the operative uses an extension strop (RGL4) in order to ease the task.
The RGA2 has a working length of 10 metres which is available in either 5mm Galvanised steel or a 5mm Stainless steel.

55

Mini retractable (self retracting) web block with built in shock pad. Complies to EN360

Model: RGA1 / MFAB-3692

£120.25
Sale
£69.75

Ridgegear Mini Fall Arrest Block is a retractable mini web block ideal for personal issue to operatives working at height. The unit is designed to be connected, and worn directly on a fall arrest harness. Has an almost instant "lock off" in the event of a fall, and recoils into the drum when slack is introduced into the lanyard. The reduced trip hazard and compact design make this unit ideal for tight work and tasks where a shorter arc of mobility is required.

56

Stretcher rescue system is a quick and easy method to ascend or descend to a position of safety

Model: RGR11 / RS-3687

Request Quote

Ridgegear RGR11 Rescue Stretcher comes equipped for hoisting by helicopter in horizontal position or hoisting in vertical position in caves or industrial confined spaces. When the patient is packaged the stretcher becomes rigid. Kit includes - Sked stretcher, Cordura backpack, Horizontal lift slings (pair), Sked tow strap, Removable webbing handles, Steel locking D karabiner, Sked vertical lift sling and a storage bag.

57

For use with pole strap & restraint lanyard with 2 x Side 'D' ring & gear loops.

Model: RBG2 / WGL-3682

Request Quote

Ridgegear Work Positioning Belt with Gear Loops is fitted with two side mounted D rings for ease of attachment and the back pad provides some lumber support and comfort, especially when tools are hung from the belt loops. The RGB2 is normally used in conjunction with an RGL5 restraint lanyard, or a rope and grab system. The uses for this restraint belt are similar to the RGB1, however to prevent the user from dropping tools from height, all tools can be secured to the gear loops by a cord lanyard and also clipped to the belt when not in use.

58

Manual operation grab for use with 11mm Kernmantle rope.

Model: RGA12 / KRG-3676

£135.59
Sale
£78.64
59

High grade polyamide fibre rope with sewn eye one end, plain other. Standard 10m, 20m or 30m lengths.

Model: RGRO 11 / R1KR-3670

£41.00
Sale
£23.78

Three standard lengths are available; 10, 20 and 30 metres, with an eye at one end, but the rope is also available by the metre with plain ends both ends or even with eyes at both ends.

60

Temporary ratchet tension horizontal lifeline.

Model: RGTL-3668

From £209.52
Sale
£121.52

Ridge Gear RGHL1 Temporary Fall Arrest Lifeline is a simple to install horizontal webbing safety line, incorporating a ratchet tensioner. For restraint purposes, the RGHL1 safety line can be used in conjunction with fixed length or adjustable restraint and fall arrest lanyards. Available in two different options, 10m is a weight of 3kg. 20m is a weight of 4kg.

61

Adjustable two leg lanyard generally used for tower climbing, steel erecting, scaffolding and maintenance on open structures where double clipping is required.

Model: RGL16 / ATLFAL-3751

£91.29
Sale
£52.95

Ridgegear RGL16 Adjustable Twin Leg Fall Arrest Lanyard, When used in conjunction with two girder slings (RGK26), the RGL16 can be used as a means of progression through suitable structures where no fixed lifeline or eye bolts are available. The lanyard length can be adjusted to suit the application. The RGL16 is supplied standard length of 1.8m

62

Scaffold hook style automatic twist lock steel connector with 30kN minimum breaking strength. Optional captivating pin supplied as standard.

Model: RGK5 / SLGK-3773

£34.22
Sale
£19.85

The large gate opening of the RGK5 makes it ideal for use in industrial areas. The use of this Karabiner often negates the use of a sling as it can connect directly to steelwork. It's often fitted to double lanyards for climbing masts and steel structures. This Karabiner is fitted with a twist lock closure and removable pin to enable retro fitting to lanyards. With a 55mm opening. Accredited to EN362.

63

Aluminium automatic twist lock connector with a 24kN minimum breaking strength.

Model: RGK4 / ATLK-3772

£31.92
Sale
£18.52

The RGK4 is a lightweight version of the RGK3 carrying a lower maximum breaking strength. Although this item can be fitted to fall arrest lanyards, it is also used in conjunction with relay devices and rescue industries. With a twist lock auto closure and a 22mm gate opening. Accredited to EN362.

64

Steel automatic twist lock connector with a 50kN minimum breaking strength.

Model: RGK3 / STLK-3771

£31.24
Sale
£18.12

This heavy weight karabiner is primarily fitted to the ends of fall arrest lanyards, due to its high MBS. The twistlock closure makes this karabiner extremely safe to use, as it locks automatically when it is clipped into anchorage point. With a 22mm gate opening. Accredited to EN362.

65

Steel automatic twist lock connector with a 25kN minimum breaking strength.

Model: RGK2 / TLK-3770

£12.43
Sale
£7.21

The RGK2 is an extremely safe karabiner to use, as it takes user intervention out by locking automatically. Similar to the RGK1 in size and weight, the RGK2 is ideal for lanyards and aid climbing. With 17mm gate opening. Accredited to EN362.

66

Steel manual screw gate connector with a 23kN minimum breaking strength.

Model: RGK1 / 1S-3769

£5.73
Sale
£3.33

The RGK1 is the workhouse of the industry, used from rope access, to fall arrest applications. This item is also used in the leisure industry for caving and rescue. The screw gate closure on this device means that the user must manually lock the RGK1 after fitting. With 17mm gate opening. Accredited to EN362.

67

Winch bag developed to give safe storage for ridgegear's man riding winch.

Model: RGK30 / WB-3760

£52.38
Sale
£30.38

Ridgegears heavy duty winch bag has been developed to give a safe storage for our popular man riding winch. Due to the weight of the winch the bag comes with a special wooden internal base which spreads the load. The zip is angled diagonally to give good access and ease of mounting onto the wooden base.

68

Heavy duty tripod storage bag designed to safely store the RGR1 tripod.

Model: RGK29 / TB-3756

Request Quote

Ridgegear heavy duty tripod storage bag is designed to safely store our RGR1 tripod. Has a full length top zip to assist with access, two carry handles which wrap around the bag for extra strength. Made with Abrasion resistant nylon.

69

Nappy style escape harness/seat that is very quick and easy to fit in an emergency.

Model: RGR6 / NEH-3754

£133.87
Sale
£77.64

Ridgegear RGH6 Nappy Escape Harness is an extremely lightweight, quick and easy to be donned in a matter of seconds.

70

Adjustable two leg web work restraint lanyard with a wide variety of connector options.

Model: RGL19 / ATLRL-3753

£52.70
Sale
£30.57

Ridgegear Adjustable Twin leg Restraint Fall Arrest Lanyard length can be adjusted to suit the application. The additional benefit of adjust-ability allow for greater flexibility. Can be used for fall restraint, as there is no shock absorption built into the system. If there is any possibility of an operative steeping / falling over an exposed edge, or falling through a fragile surface, a fall arrest product should be used. Supplied: 1.2 - and 1.8m.

71

Ridgegear tripod for confined space fall arrest and rescue applications, with optional three way fall arrest retrieval block and/or rescue winch.

Model: RGR1 / RRT-3580

From £1,445.88
Sale
£824.15
72

Two leg non-adjustable web work restraint lanyard with a choice of connectors.

Model: RGL14 / TLRL-3750

£36.98
Sale
£21.45

Ridgegear RGL14 Twin Leg Restraint Fall Arrest Lanyard should be used when the operative is working from a static position, connected to a fixed anchor point. Movement between anchorages can be achieved by means of double clipping.

73

Adjustable single leg web work restraint lanyard with a wide variety of connector options.

Model: RGL12 / RRL-3746

£28.37
Sale
£16.45

Ridgegear RGL12 Fall Restraint Lanyard is an adjustable restraint lanyard, and various lengths are available to act as a leash for an operative working at height. The adjust-ability of the product ensures that the correct length can be selected for the task in hand. It is important to understand the principles of 'fall restraint' as the RGL12 can only be used for fall restraint, as there is no shock absorption built into the system. If there is any possibility of an operative stepping/falling over an exposed edge, or falling through a fragile surface, a fall arrest product should be used.

74

Fixed length single leg kernmantle synthetic rope utlity lanyard with shock pack for fall arrest.

Model: RGL11 / UL-3745

£181.47
Sale
£105.26
75

Two leg elasticated lanyard allows leg movement between anchorage points by means of double clipping.

Model: RGL9 / TLEL-3742

£88.78
Sale
£51.50
76

Fall arrest lanyard for use when the operative is working from a static position connected to a fixed anchor point.

Model: RGL6 / EFAL-3740

£76.37
Sale
£44.29
77

Single leg non-adjustable web work restraint lanyard with a wide variety of connector options.

Model: RGL5 / RL-3739

£28.37
Sale
£16.45

Ridgegear RGL5 Fall Restraint Lanyard is to act as a leash for an operative working at height to prevent possibility of risk of a fall. It is important to understand the principles of "fall restraint" as the RGL5 can only be used for fall restraint, as there is no shock absorption built into the system. If there is any possibility of an operative falling, a fall arrest product must be used.

78

Webbing strop designed to be used as an extension strap fitted to the rear D-ring of a full body harness. For restraints or fall arrest block use only (not fall arrest lanyards).

Model: RGL4/K12 / RES-3738

£26.44
Sale
£15.34
79

Two leg web lanyard generally used for tower climbing, steel erecting, scaffolding and maintenance on open structures.

Model: RGL3 / RTLL-3737

£74.97
Sale
£43.48

Ridgegear RGL3 Twin Leg Fall Arrest Lanyard allows movement between anchorage points by means of double clipping. This system is generally used for tower climbing, steel erecting, scaffolding and maintenance on open structures. This lanyard can be fitted with any compatible EN362 karabiner. Available as either 1.4 or 1.8m.

1

Ridgegear Defender fall arrest block with UHMWPE web lifeline and triple action karabiner lower connector. Top connector not included.

2

Two point safety harness with fast fit buckles, shoulder and leg comfort pads, rear D and chest mounted front D-link connection point.

3

Two point safety harness fitted with shoulder comfort pads, rear D and chest mounted front D-link connection point.

4

Premium Y-shaped rope access harness with support pads on the legs, waist and shoulders. 6 built-in tool loops.

5

Ecofriendly two point safety harness produced from upcycled PET bottles, fitted with a rear dee and a chest mounted front dee.

6

Two point Y-shaped safety harness is a unisex design with both rear and front attachment points.

7

Lightweight sit harness designed for climbing, with a colour coded right leg webbing to easily distinguish between two sizes.

8

Manual rescue winch featuring an up/down clutch locking mechanism and an energy absorbing unit for additional safety.

9

High visibility & luminous confined space safety harness with rescue strap. 2 phosphorescent stripes and 2 reflective stripes.

10

Ridgegear rescue system with rescue device, anchorage sling, rescue pole & carry bag.

11

Hi-vis orange two point safety harness with reflective yarn, fitted with a rear D and a chest mounted front D. Optional fast fit buckles.

12

Lightweight and compact fall arrest block with galvanised wire lifeline. Swivel lower karabiner. Top connector not included.

14

Rope grab designed to provide vertical fall protection to operatives ascending/ descending a ladder or structure, or to provide a work positioning/restraint solution.

15

Pole strap with specially designed controlled release adjuster buckle to ensure safe operation and adjustment.

16

Wire rope multi purpose work-postioning device with poly outer sheath for protection.

17

Suspension trauma safety steps which help prevent the effects of toxic shock caused by prolonged suspension after a fall.

18

Triangular manual screwgate delta link, semi-permanent connector. 27kN minimum breaking strength.

19

Aluminium automatic double action scaff hook with captive eye. Designed to be a permanent lanyard fixture. 23kN minimum breaking strength.

20

Steel automatic snap hook with captive eye. Designed to be a permanent lanyard fixure. 23kN minimum breaking strength.

21

Aluminium automatic double action scaff hook with captive eye. Designed to be a permanent lanyard fixture. 27kN minimum breaking strength.

22

Premium Y-shaped work positioning harness with support pads on the legs, waist and shoulders. 2 built-in tool loops.

23

Short lanyard specifically designed for ladder restraint when a shorter lanyard is required. The two attachments points allow length adjustment.

24

Two leg 11mm kermantle rope lanyard for fall arrest with a choice of connectors.

25

Single leg non-adjustable 11mm kernmantle rope restraint lanyard with a wide variety of connector options.

26

Aluminium automatic double action scaff hook with captive eye. Designed to be a permanent lanyard fixture. 23kN minimum breaking strength.

27

Aluminium body, steel gate snaphook with captive eye for permanent connections. 23kN minimum breaking strength.

28

Steel automatic snap hook with swivelling captive eye. Designed to be a permanent fixure. 23kN minimum breaking strength.

29

Automatic aluminium tri-action swivel twist lock hook connector with a 30kN minimum breaking strength. Designed to be a permanent lanyard fixture.

30

Super lightweight aluminium automatic double action scaff hook with captive eye. Designed to be a permanent lanyard fixture. 25kN minimum breaking strength.

31

Aluminium scaffold hook style automatic twist lock karabiner with a 23kN minimum break strength. Optional captivating pin supplied as standard.

32

Aluminium manual screw gate connector with wide load bearing design and side-swing gate. 22kN minimum breaking strength.

33

Aluminium automatic tri-action twist lock connector with a 24kN minimum breaking strength.

34

Aluminium manual screw gate connector with a 24kN minimum breaking strength.

35

Steel manual screwgate delta link, semi-permanent connector. 45kN minimum breaking strength.

36

Steel automatic tri-action twist lock connector that is designed to be a permanent lanyard fixture. 45kN minimum breaking strength.

37

Steel automatic tri-action twist lock connector that is designed to be a permanent lanyard fixture. 45kN minimum breaking strength.

38

Steel automatic tri-action twist lock connector with a 40kN minimum breaking strength.

39

Steel automatic twist lock connector with a 25kN minimum breaking strength.

40

3 point safety harness fitted with front, rear and right-hand side shoulder rescue attachment points. Optional fast fit buckles.

41

Same as RGA4 though fitted with side / steady handle for when not solid mounted (to tripods, gantry etc..) retrieval block fitted with a up and down winch. Conforms to EN360 & EN1496

42

Fixed length single leg web lanyard with built-in shock-pack for fall arrest.

45

Basic two-point harness kit with fall arrest lanyard and 2 standard steel screwgate karabiners.

46

Step-in Y-shaped comfort harness with support pads on the legs, waist and shoulders. Two tool loops.

47

4 point harness fitted with front, rear and side attachment points on a comfortable work positioning belt. Optional fast fit buckles.

48

Two point safety harness fitted with a rear D-ring and a chest mounted front D. Optional fast fit buckles.

49

Basic access harness with a rear D-ring only. Used primarily with a fall arrest lanyard or inertia reel block.

50

6m multi purpose Retractable "self retracting lifeline" (SRL) fall arrest block with fall indicating connector. Conforms to EN360.

51

Fixed length single leg kernmantle synthetic rope lanyard with shock pack for fall arrest.

52

Retractable "self retracting lifeline" (SRL) three way retrieval block fitted with an up/down winch mechanism and the standard fall arrest capacity.Conforms to EN360 & EN1496

54

Retractable "self retracting lifeline" (SRL). Fall arrest block 10m 5mm galvanised steel cable,(available in stainless) EN360 (fall arrest)

56

Stretcher rescue system is a quick and easy method to ascend or descend to a position of safety

57

For use with pole strap & restraint lanyard with 2 x Side 'D' ring & gear loops.

58

Manual operation grab for use with 11mm Kernmantle rope.

59

High grade polyamide fibre rope with sewn eye one end, plain other. Standard 10m, 20m or 30m lengths.

61

Adjustable two leg lanyard generally used for tower climbing, steel erecting, scaffolding and maintenance on open structures where double clipping is required.

62

Scaffold hook style automatic twist lock steel connector with 30kN minimum breaking strength. Optional captivating pin supplied as standard.

63

Aluminium automatic twist lock connector with a 24kN minimum breaking strength.

64

Steel automatic twist lock connector with a 50kN minimum breaking strength.

65

Steel automatic twist lock connector with a 25kN minimum breaking strength.

66

Steel manual screw gate connector with a 23kN minimum breaking strength.

67

Winch bag developed to give safe storage for ridgegear's man riding winch.

68

Heavy duty tripod storage bag designed to safely store the RGR1 tripod.

69

Nappy style escape harness/seat that is very quick and easy to fit in an emergency.

70

Adjustable two leg web work restraint lanyard with a wide variety of connector options.

71

Ridgegear tripod for confined space fall arrest and rescue applications, with optional three way fall arrest retrieval block and/or rescue winch.

72

Two leg non-adjustable web work restraint lanyard with a choice of connectors.

73

Adjustable single leg web work restraint lanyard with a wide variety of connector options.

74

Fixed length single leg kernmantle synthetic rope utlity lanyard with shock pack for fall arrest.

75

Two leg elasticated lanyard allows leg movement between anchorage points by means of double clipping.

76

Fall arrest lanyard for use when the operative is working from a static position connected to a fixed anchor point.

77

Single leg non-adjustable web work restraint lanyard with a wide variety of connector options.

78

Webbing strop designed to be used as an extension strap fitted to the rear D-ring of a full body harness. For restraints or fall arrest block use only (not fall arrest lanyards).

79

Two leg web lanyard generally used for tower climbing, steel erecting, scaffolding and maintenance on open structures.

LiftingSafety uses cookies to improve your user experience.

Find out more