Riley Superclamp

Riley Superclamp "ES" Budget Adjustable Girder Clamp - Range from 1000kg to 5000kg

Lightweight, low cost girderclamp.

Model: Riley Superclamps ES / AGC-3350

From £85.80

Sale

£78.94

A lightweight low cost girderclamp with low headroom anchor point makes this a highly recommendable unit for most industrial applications.

Riley Superclamp "PFC" Permanently Fixed Adjustable Girderclamps, WLL of 1000kg or 2000kg

Clamps Incorporating Lifting Eye and Adjusting Bar.

Model: PFC1 / PFC2 / RSC-3348

From £93.50

Sale

£86.02

These girder clamps are designed for light industrial applications; particularly where a permanent overhead anchor point is required. These high strength inexpensive lightweight clamps are excellent for application in small garages and hobbyist workshops.

As with all our superclamp products each PFC unit is proof loaded and supplied with a certificate of test and inspection.

Riley Superclamp "Fixed Jaw" Adjustable Girder Clamps - Range from 2000kg to 15000kg

Incorporating Adjusting Mechanism and Lifting Shackle.

Model: Riley Superclamps S / FJ-3352

From £152.90

Sale

£140.67

These girder clamps are truly versatile in application and may be used for lifting, pulling, or as an anchor point. Designed specifically to provide maximum jaw grip adjustment. These products are engineered for practical use where mobility is essential. The clamps are speedily applied and do not require additional tools or width adjusting components, such as spacing washers. The left and right-hand threaded adjusting bar ensures a secure grip on the beam flange.

Riley Superclamp "Swivel Jaw" Adjustable Girder Clamps, W.L.L 3000kg to 10000kg

Incorporating Machined Jaw, Adjusting Mechanism and Lifting Shackle.

Model: Riley Superclamps S / SJ-3353

From £352.00

Sale

£323.84

Swivel jaw adjustable girder clamps incorporate the additional benefit of horizontal jaw adjustment. This enables the full length and a maximum width of the swivel jaw to anchor evenly on a considerable surface area of the beam flange. The ‘Swivel Jaw’ range of our SuperClamp products are designed to ensure ease of application.

Riley Superclamp "PT" Adjustable Push Travel Trolley Clamp - Range from 500kg to 3000kg

Incorporating adjustment by turning load shaft.

Model: A-3369

From £111.10

Sale

£102.22

Riley Superclamps PT Range are lightweight, low cost push travel trolleys with a low headroom anchorage point, making them a highly recommendable unit for most industrial applications.

Riley Superclamp "B" Adjustable Runway Beam Trolley - Range from of 3,000kg to 10,000kg

Incorporating Wheelguarding Anti-Drop Plates, Width Adjusting and Lifting Shackle.

Model: ARBT-3366

From £513.70

Sale

£472.61

The new, unique quality features of Riley Superclamps B range of manual travelling gear are the wheel guarding anti-drop plates, which are incorporated into the practical design of these transferable and mobile securing attachments. These adjustable beam trolleys are of acknowledged and experienced design. The unique quality features of this new range of manual traveling gear are the wheel guarding anti-drop plates, which are incorporated into the practical design of these transferable and mobile securing attachments. To compliment this range, reference is made to SUPERCLAMP geared runway beam trolleys which allow additional ease of load conveyance. The left and right hand threaded adjusting bar only requires turning so as to ensure appropriate adaptation to a beam width, and the trolley is ready for use. No additional tools or width adjusting components are required.

Riley Superclamp "BA" Adjustable Lightweight Runway Beam Trolleys - Range from 1000kg to 2000kg

Incorporating Wheelguarding Anti-Drop Plates, Width Adjusting and Lifting Shackle.

Model: AL-3365

From £276.10

Sale

£254.02

The Riley Superclamps BA range of lightweight hand push runway beam trolleys offer an easy to use mobile securing attachment for load and lifting requirements. It is developed for lighter industrial application, this product range is completely recommended for maintenance departments and must be an integrated part of every engineers tool kit.

The left and right hand threaded adjusting bar only requires turning so as to ensure appropriate adaptation to a beam width, and the trolley is ready for use. No additional tools or width adjusting components are required. Fitted with a width adjustment locking mechanism and wheelguarding anti-drop plates, this range of products could well be one of the great innovations to secure safety and health in the home workshop and at work.

Riley Superclamp "GBT" Adjustable Geared Runway Beam Trolleys - Range from 3000kg to 20,000kg

Incorporating Wheel guarding Anti-Drop Plates, Width Adjusting and Chain Wheel, Chain, and Lifting Shackle.

Model: A-3367

From £731.50

Sale

£672.98

Our geared runway beam trolleys have taken requirements of the user into consideration. Designed and manufactured with wheelguarding  anti-drop plates, this product range assures ease of application in use, maximum safety and hold, and low maintenance requirements.

As with all these UK made clamps, the quality is of the highest standard to comply with user requirements. Standard 3 metre (10 ft) drop of chain supplied, extra lengths upon request.

Riley Superclamp "Autolock" Runway Beam Trolley - Range from 3000kg to 10,000kg

Incorporating Wheelguarding Anti-Drop Plates and Lifting Shackle.

Model: A-3368

From £407.00

Sale

£374.44

A self locking clamp unit with wheel guarding anti-drop plates designed for maximum speed of application, minimum maintenance requirements and maximum safety. The practical and versatile design provides the user with a high quality product, tailored to the needs of those persons who require the use of securing attachments for their lifting operations.

Riley Superclamp "R" Adjustable Rail Lifting Clamp - Range from 3000kg or 5000kg

Incorporating Adjusting Mechanism and Lifting Shackle.

Model: ARLC-3364

From £207.90

Sale

£191.27

This adjustable rail lifting clamp is designed and developed for standard rail sections, it provides a reliable and secure grip on the rail when tightened. It's lightweight, versatility and low maintenance make these rail clamp products a highly recommended unit for all engaging in rail construction.

Riley Superclamp "Fixed Jaw" Adjustable Girderdogs - 20t, 25t or 30t Options

Incorporating Adjusting Mechanism and Lifting Shackle.

Model: Sxx / FJ-3355

From £1,175.90

Sale

£1,081.83

Girderdogs incorporate all the reputedly excellent and reliable design features for which our products are known. The design is enhanced by a well balanced distribution of side plates, ensuring maximum grip and hold over an adequate length of girder or beam flange. They are safe in use, and once in position, are speedily applied to a steel beam.

No additional width adjusting tools or components are required.

Riley Superclamp "P" Adjustable Pipe and Round Section Lifting Clamps - Range from 1000kg to 4000kg

Incorporating lifting Shackle and Adjusting Mechanism.

Model: APAR-3362

From £167.20

Sale

£153.83

Riley pipe lifting clamps are designed for efficient and easy handling of cylindrical objects such as pipes or bars.

This clamp is readily applied to cylindrical objects, and the adjustable jaw grip allows for a wide range of cylindrical diameters of sections to be lifted. Also suitable as an anchor point. No tools required. The lifting clamp comes complete with lifting shackle and width adjusting mechanism incorporating a left and right hand threaded adjusting bar with handle.

Riley Superclamp "USC" Universal Beam Clamp for use Vertical or Horizontal Applications - Range from 2032kg to 10000kg

For side load applications where conventional clamps are unsuitable.

Model: Riley Superclamps USC / U-3370

From £394.90

Sale

£363.31

This universal clamp has been designed not only for vertical use, but also for side load applications, where conventional clamps are not suitable. This clamp is truly versatile in application and can be used for lifting, pulling or as an anchor point. It can be loaded at any angle and eliminates the use of spreader beams in various lifting operations. With a low headroom anchor point, it can be used as a single or twin point lifting, giving positive grip and quick application combined with lightweight construction.

Riley Superclamp "BFC" Adjustable Bulb Flats Section Clamps - 1000kg or 3000kg

Incorporating Hardened Jaws, Adjusting Mechanism and Lifting Shackle.

Model: Riley Superclamps BFC / ABFS-3363

From £202.40

Sale

£186.21

The bulb flats section clamp offers the benefit of maximum adjustability to fit standard dimensions of bulb flats steel sections.

These clamps are primarily developed for a multitude of applications in civil and marine engineering, construction and maintenance.

The adjusting bar secures maximum adjustability, and eliminates the use of additional tools or width adjusting components.

Riley Superclamp "AC" Adjustable Angle Section Clamps S.W.L 500kg to 3000kg

Incorporating V-Block Clamping Jaw.

Model: Riley Superclamp AC / AAS-3361

From £166.10

Sale

£152.82

This clamp serves as an anchor or lifting point when attached to an overhead steel angle section approved for lifting applications. The V-Block clamping jaw ensures that the clamp is securely fixed to the angle section when adequately tightened. These clamps are designed for safety and versatility - each model being suitable to accommodate a wide range of steel angle sections.
No tools required as the adjusting mechanism is an integral part of the design features, and incorporates an adjusting bar with handle.

Riley Superclamp "HPC" Horizontal Plate Lifting Clamps - Range Per Pair from 1500kg to 4000kg

Incorporating Lifting Shackle.

Model: HPLC-3360

From £226.60

Sale

£208.48

Horizontal plate lifting clamps are designed to be used as original in pairs only.

Their rigidly competent designs incorporate an easily replaceable toothed cam toe which ensures maximum grip and hold. The standard jaw  apertures allow for a wide range of mild steel plate thickness to be horizontally lifted. Parts are easily replaceable.

Horizontal plate lifting clamps are equipped with a lifting shackle, and easily replaceable components.

Riley Superclamp Adjustable Double Ended Monorail Construction Clamp

Adjustable height and width beam clamp incorporating height adjustment mechanism. 3000kg or 4000kg

Model: Riley Superclamps S / AD-3357

From £511.50

Sale

£470.58

Monorail construction clamps incorporating a height adjusting mechanism are speedily applied to existing steel girders, so as to expedite the erection of a conveying system. They are provided with the facility to adjust the conveying girder in height where required. Their width and height adjusting capabilities make these versatile units an inexpensive, safe, and time saving proposition for the construction of a reliable permanent or temporary overhead conveying system.

Riley Superclamp Adjustable Double Ended Monorail Construction Clamp - 3000kg or 4000kg

Incorporating Stationary Height Stabilizer Block.

Model: AD-3356

From £457.60

Sale

£421.00

These monorail construction clamps are designed to enable speedy erection of permanent or temporary overhead conveying systems, where existing steel girders are of an adequately balanced horizontal level. Both clamps are fully adjustable by operating the left and right hand threaded adjusting bars incorporated into the unit. The designed-in stationary height stabilizer block ensure a rigid construction of the unit. Additional tools or width adjusting components are not required to apply the unit onto existing steel girders.

Riley Superclamp "PH" Pipe Hooks with Lifting Shackle - Range from 1000kg to 8000kg

Designed to be used in pairs for efficient and easy handling of pipes.

Model: PH-3351

From £250.80

Sale

£230.74

Prices are for a pair of hooks

Riley Superclamp "PLC" Horizontal to Vertical Plate Lifting Clamp - Range from 1000kg to 4000kg

Built with an additional locking mechanism providing an additional safety feature for the operator.

Model: Riley Superclamps PLC / HTVP-3349

From £182.60

Sale

£168.00

Horizontal to Vertical Plate Lifting Clamp has been developed to provide the user with a safe to use and easy to handle plate lifting tool.

The locking mechanism provides an additional safety feature for the operator.

Riley Superclamp "ELL1" Low Profile Overhead Beam Clamp Used for Hoist Installation - 200kg

Incorporating Adjustable Mechanism, For use in limited space above the beam.

Model: Riley Superclamps ELL1 / LP-3372

From £458.86

Sale

£422.15

This unique clamp is fitted to the top beam flanges and was designed primarily to help reduce the risk of accidents when positioning heavy load bearing equipment to the lower flange. This clamp has lifting points each side and can be used independently or together for a balanced lift. Being of light weight construction can be fitted quickly.

Riley Superclamp "EL Series" Adjustable Double Sided Easy Lift Clamp Used for Hoist Installation, SWL 200kg up to 3048kg

Incorporating adjustable mechanism for beam ranges between 114 and 300mm.

Model: EL (Easy Lift) Series / A-3371

From £488.89

Sale

£449.78

This unique top mounted beam clamp is fitted to the top beam flanges and was designed primarily to help reduce the risk of accidents when positioning heavy load bearing equipment to the lower flange. This has lifting points each side and can be used independently or together for a balanced lift. Being of light weight construction can be fitted quickly.