Crosby 'AS17' Bullet Jaw and Slurry Swivel, WLL Range from 8500kg to 35 tonne

Crosby AS17  Bullet Jaw Slurry  Angular Contact Bearing Swivel are one of 9 options of crosby swivel in this style and offer capaties of up to 35 tonne.

The Crosby AS-17 Slurry Swivel is a zinc plated Bullet Type Swivel (AS-7), designed with two rubber lip style seals about the shaft.  The threaded cap is sealed with a silicone sealant and secured with a set screw.  The swivels are provided with an Alemite grease fitting for easy lubrication.

• Wire Rope Sizes: 1/8" through 1-1/2"
• Angular contact bearings maximize efficiency, reliability and service life of swivel and extend the life of the wire rope.
• Designed for high rotation speed: Lower torque required to initiate rotation.
• Individually Proof Tested to 2 times the Working Load Limit with certification.
• Hook models utilize genuine Crosby hooks which are forged alloy steel, Quenched and Tempered and contain the patented QUIC-CHECK markings.
• Design Factor of 5 to 1.
• Entire swivel is Zinc plated to resist corrosion.
• Each swivel, 8.5 tons and larger is furnished with a pressure lubrication fitting.

Metric Dimenisons & Specifications

*Ultimate Load is 5 times the Working Load Limit. Individually Proof Tested to 2 times the Working Load Limit.

Product Options

AS-20 thimble Insert

• When terminating with wire rope clips, we recommend tde use of the thimble Insert. The result will be extended wire rope life.
• Allows standard swivel to be used in application requiring a thimble fitting.
• For use with our Bullet Style (AS-7) and Jaw Style (AS-1, AS-2, AS-3 & AS-4) swivels.
• Machined from carbon steel. Zinc plated.