Home/
Lifting Equipment/
Chain Hoists; Manual, Electric, Air/
Air Hoists/
JDN Air Hoists/
JDN "TI LMF" Low Headroom Air Hoist with Trolley

JDN "TI LMF" Low Headroom Air Hoist with Trolley

Low Headroom Air Hoist and Trolley Combination, 500kg to 6.3 Tonne

Model:

JDN LMF / LHT-2746

When only low headroom is available and the standard trolleys don't meet the requirements we recommend JDN low headroom trolleys where the air hoists are horizontally mounted.When only very low headroom is available we recommend the Ultra-Low Monorail Hoists.

Standard Features

State of the art by using JDN Air Hoists PROFI TI as well as a new driving motor
Low-maintenance and low-wear operation of the motors by means of a reduction of components
No additional motor lubrication required
2-step travelling speed
Changeable track width*

Special Features

Able to negotiate curves
Longer cross beams to improve the minimum headroom even with bulky loads

Options

Rack and pinion drive
Spark-resistant package
Offshore paint

Energy Feeding Systems

The energy can be fed by various different systems:

Energy chain
C-shaped rail
Square rail
Spiral hose
Hose trolleys

LiftingSafety Review:

The JDN LMF series of low headroom air hoists offer capacities up to 6.3 tonne SWL and can be supplied with a pneumatic powered trolley. This is a specialist piece of lifting equipment most commonly used on Rigs offshore. As with all the JDN hoists the LMF short head room product is a top of the range product and priced accordingly. With specialist hoist like this our policy is to apply only a small margin and so our price will be very competitive

Specifications

Hoist Type		PROFI 05 TI	PROFI 1 TI	PROFI 2 TI	PROFI 3 TI	PROFI 6 TI
Trolley Type		LMF 05-2 t	LMF 05-2 t	LMF 05-2 t	LMF 3,2 t	LMF 6,3 t
Carrying capacity	t	0,5	1	2	3,2	6,3
Number of chain strands		1	1	2	1	2
Motor output Hoist	kW	1	1	1	3,5	3,5
Motor output Trolley	kW	0,2	0,2	0,2	0,2	0,2
Air pressure	bar	6	6	6	6	6
Lifting speed at full load	m/min	10	5	2,5	4,5	2,2
Lifting speed without load	m/min	17	10	5	9	4,5
Lowering speed at full load	m/min	17	11	5,5	10,8	5,4
Travelling speed at full load	m/min	9*/14	9*/14	9*/14	9*/14	9*/14
Air consumption at full load - Lifting	m³/min	1,2	1,2	1,2	4	4
Air consumtion at full load - Lowering	m³/min	1,5	1,5	1,5	5,5	5,5
Air consumtion trolley motor	m³/min	0,6	0,6	0,6	0,6	0,6
Air connection		G ½	G ½	G ½	G 3/4	G 3/4
Hose dimension (Ø inside)	mm	13	13	13	19	19
Weight at standard lift, without control	kg	98	99	105	210	330
Chain dimension	mm	7 x 21	7 x 21	7 x 21	13 x 36	13 x 36
Weight of chain	Kg/m	1	1	1	3,8	3,8
Standard lift	m	3	3	3	3	3
Length of control at standard lift	m	2	2	2	2	2
Max. bottom flange thickness t	mm	25	25	25	35	35
Max. bottom flange width b	mm	310	310	310	310	310
Min. bottom flange width b	mm	80	80	80	125	125

Dimensions

low headroom trolley

Hoist Type	PROFI 05 TI	PROFI 1 TI	PROFI 2 TI	PROFI 3 TI	PROFI 6 TI
Trolley Type	LMF 05-2 t	LMF 05-2 t	LMF 05-2 t	LMF 3,2 t	LMF 6,3 t
A max	105	105	105	105	106
B	36	36	36	36	70
b min	80	80	80	80	125
C	164	164	164	164	169
D1	70	70	70	70	165
D2	70	70	70	70	70
E1	116	116	116	116	236
E2	116	116	116	116	116
F	172	172	195	228	351
G1	95	95	95	95	197
G2	95	95	95	95	95
H min	320	320	394	415	537
J	320	320	320	397	397
K1	145	145	145	233	233
K2	152	152	152	248	248
L	715	715	715	825	995
M	28	28	28	30	40
N	42	42	42	42	51
t max	25	25	25	35	35

LiftingSafety Review:

Controller Options

The JDN Air Hoist Series are available with the following controller options:

	Rope Control Universally applicable for any control length This control enables a sensitive starting and stopping. Lifting and lowering speeds are infinitely variable. The rope control is available for all PROFI hoists up to 25 t carrying capacity. The PROFI 37 TI, 50 TI and 100 TI are fitted with a pull chain instead of a cord.

	Lever Control Especially for JDN Air Winches: With the lever control, loads can be moved ergonomically and safely in a precise manner and at variable speeds. The actuation direction on the lever corresponds to the direction of movement of the rope drum. When released, the lever returns automatically to the centre position.

	FI- Control Sensitive control, very easy handling This FI-Control allows very sensitive regulation of the speeds. Its handling is very easy and comfortable due to the ergonomic design of the synthetic housing. The use of non-rusting materials allows the application in areas with aggressive substances in the atmosphere. The control hoses are enclosed in an outer sheath which protects them from ambient influences.

	E- Control Low maintenance, corrosion-proof The very robust brass valve distinguishes the E-control. The low weight and the praxis-orientated design result in an easy handling. Sensitive speed control is not possible.

	F- Control Multilateral due to different housings The F-control consists of unbreakable synthetic material resistant to ambient influences. The ergonomically designed housing enables a good handling. Up to 18 different control functions can be integrated as for example key switch, double stage travelling speed or simultaneous control of several motors. As a special extra the F-control can also be delivered with infinitely variable control of hoisting and travelling speeds.

	DS Control The operating air is connected to the hand control valve. A built-in pressure regulator prevents to overload the hoist in case of inadmissably high pressure. The motor connection housing of the DS control has an oiler that stops automatically the oil flow when the hoist comes to a standstill. Another advantage is that the oiler is situated directly at the motor. The operating air gets immediately to the motor when the hand lever is actuated. The hand lever is spring loaded and returns automatically to zero position. This forced release serves at the same time as an emergency stop. The control is for two-hand operation. The DS control is available for all air hoists of the "B" and "M" series.

	PS Control The PS control is for single hand use. It operates indirectly according to the ventilation principle. The operating air is connected to the control valve of the motor. The control pistons of the motor are actuated by the push buttons of the hand control. The push buttons automatically return to zero position. In the control valve of the motor is a pressure regulator which protects the hoist from inadmissably high pressure. The integrated oiler provides the necessary lubrication. The PS controls are available for the air hoists M 63 D, in EC version with emergency stop as standard.

LiftingSafety Review:

JDN Enquiry Form

Enquiry Form for JDN Hoists, Please Download, Fill Out and Return this Form Via Fax or Email so that we can identify the hoist to best suit your needs.

(approx. 0.1Mb)

Hoist Model / Capacity

Height of Lift (m) (e.g. 5)

(min:3)

Unit Price Request Quote

Quantity

Add to Quote Request