LIFTINGSAFETY
Tiger "TAH33" Air Hoist

Tiger "TAH33" Air Hoist

Pneumatic air hoists suitable for fleeting / oblique pulling. 3 Tonne to 10 Tonne

Model: 

TAH33 / TPCH-5082

Tiger "TAH33" Air Hoist

Tiger TAH33 Air Hoist With Pendant Tiger TAH33 Air Hoist With Toggle Control Pneumatic Hoist Toggle Control Weighted Pneumatic Hoist Pendant Control

Tiger air hoists are designed specifically for industrial and general engineering applications such as automotive plants, foundries, heat treatment plants, zinc refineries and acid battery manufacturing facilities. The hoists operate at air pressures of between 4 and 6 bar. They comply with the requirements of ASME B30.16 and EN14492-2. The manufacturing facility producing the hoists is ISO9001, ISO14001 & OHSAS18001 certified.

  • Reliable, fast, efficient, quiet and lightweight
  • Greater than 5:1 factor of safety
  • Suitable for Fleeting/Oblique pulling

Features of the TAH33 Tiger Air Hoist

Load Limiter

Integral differential pressure load limiting valve automatically prevents the operator lifting a load of more than 125% of the working load limit. Load limiter is 100% repeatable at all working pressures and does not wear or generate damaging heat.

Pendant Control

Pendant control options are supplied with aluminium anodised controls as standard. Nickel plated SG iron options and twist grip pendants are available as option. Dual hoist pendants are also available on request.

Emergency Stop

Pendant control hoists are supplied with a mains emergency stop valve. This shuts off the main air supply to the hoist when activated.

Precise Control

Accurate and precise positioning of loads is standard for both toggle and pendant control models.

Fail Safe Disc Brake

Non-asbestos self-adjusting disc brake is applied automatically when the air supply to the hoist is shut off. The brake is self-adjusting for the life of the brake and can hold more than125% of the working load limit.

Fleeting or Oblique pulling

This type of application is when the load deviates from the vertical position with a force acting directly between load hook and suspension point.

Integral Silencer

The exhaust air silencer is built into the hoist gearbox housing and limits the noise level to below85dB(A).

Load Chain

Grade T load chain ensures stringent high-speed duty cycles can be met. The load chain is in accordance with the requirements of EN818-7 Appendix B. Available as self-coloured black finish or zinc plated.

Vane Motor

Assisted vane lifting ensures maximum starting torque when starting under load.

Sealed Gearbox

The sealed planetary gearbox ensures that the most stringent duty cycles can be met. The gears are heat treated and mounted on high strength, low friction bearings.

Ease of Maintenance

The modular design of the hoist allows easy access to internal components such as the motor, gearbox, brake and load limiter. Common parts are used throughout the range.

ATEX Category 3, normal safety

ATEX marking: Ex II 3 GD c IIB T4, IIIB T135°C. Suitable for gas and dust hazardous areas: Zone 2 (gas) and Zone 22 (dust). Also available for Atex category 2, high safety. Please contact us for more details.

Hoist Specifications

Part Number AH-030T AH-060T AH-103T
Lifting Capacity (tonne) 3 6 10
Falls of Chain 1 2 3
Chain Size (mm) 13 x 36 13 x 36 13 x 36
Total Weight (kg) * 76.5 99.5 139.5
Weight Per Additional metre HOL (kg) 3.8 7.6 11.4
Full Load Lifting Speed (m/min) @ 6 bar 5.3 2.6 1.6
Full Load Lifting Speed (m/min) @ 4 bar 3.8 1.9 1.1
No Load Lifting Speed (m/min) @ 6 bar 7.5 3.7 2.4
Full Load Lowering Speed (m/min) @ 6 bar 8.3 4.1 2.6
No Load Lowering Speed (m/min) @ 6 bar 6.8 3.4 2.2
Air Consumption (m3/min) @ 6 bar 4 4 4
Air Consumption (m3/min) @ 4 bar 2.6 2.6 2.6
Air Connection: Toggle & Pilot Pendant Control G1 G1 G1
E/Stop Pilot Pendant Control G3/4 G3/4 G3/4
Supply Hose (Inside Dia. mm) 25 25 25
Sound Level (db(A)): Full Load Lifting @ 6 Bar 81 81 81
Sound Level (db(A)): Full Load Lowering @ 6 Bar 83 83 83

* Weight of TAH33 model includes 3m lift, 2m toggle control.

Pricing

@ £71.65 (min:3) (3 included in price)
Unit Price

£8491.20
Add to Quote Request
Description

+

Tiger air hoists are designed specifically for industrial and general engineering applications such as automotive plants, foundries, heat treatment plants, zinc refineries and acid battery manufacturing facilities. The hoists operate at air pressures of between 4 and 6 bar. They comply with the requirements of ASME B30.16 and EN14492-2. The manufacturing facility producing the hoists is ISO9001, ISO14001 & OHSAS18001 certified.

  • Reliable, fast, efficient, quiet and lightweight
  • Greater than 5:1 factor of safety
  • Suitable for Fleeting/Oblique pulling

Features of the TAH33 Tiger Air Hoist

Load Limiter

Integral differential pressure load limiting valve automatically prevents the operator lifting a load of more than 125% of the working load limit. Load limiter is 100% repeatable at all working pressures and does not wear or generate damaging heat.

Pendant Control

Pendant control options are supplied with aluminium anodised controls as standard. Nickel plated SG iron options and twist grip pendants are available as option. Dual hoist pendants are also available on request.

Emergency Stop

Pendant control hoists are supplied with a mains emergency stop valve. This shuts off the main air supply to the hoist when activated.

Precise Control

Accurate and precise positioning of loads is standard for both toggle and pendant control models.

Fail Safe Disc Brake

Non-asbestos self-adjusting disc brake is applied automatically when the air supply to the hoist is shut off. The brake is self-adjusting for the life of the brake and can hold more than125% of the working load limit.

Fleeting or Oblique pulling

This type of application is when the load deviates from the vertical position with a force acting directly between load hook and suspension point.

Integral Silencer

The exhaust air silencer is built into the hoist gearbox housing and limits the noise level to below85dB(A).

Load Chain

Grade T load chain ensures stringent high-speed duty cycles can be met. The load chain is in accordance with the requirements of EN818-7 Appendix B. Available as self-coloured black finish or zinc plated.

Vane Motor

Assisted vane lifting ensures maximum starting torque when starting under load.

Sealed Gearbox

The sealed planetary gearbox ensures that the most stringent duty cycles can be met. The gears are heat treated and mounted on high strength, low friction bearings.

Ease of Maintenance

The modular design of the hoist allows easy access to internal components such as the motor, gearbox, brake and load limiter. Common parts are used throughout the range.

ATEX Category 3, normal safety

ATEX marking: Ex II 3 GD c IIB T4, IIIB T135°C. Suitable for gas and dust hazardous areas: Zone 2 (gas) and Zone 22 (dust). Also available for Atex category 2, high safety. Please contact us for more details.

Hoist Specifications

Part Number AH-030T AH-060T AH-103T
Lifting Capacity (tonne) 3 6 10
Falls of Chain 1 2 3
Chain Size (mm) 13 x 36 13 x 36 13 x 36
Total Weight (kg) * 76.5 99.5 139.5
Weight Per Additional metre HOL (kg) 3.8 7.6 11.4
Full Load Lifting Speed (m/min) @ 6 bar 5.3 2.6 1.6
Full Load Lifting Speed (m/min) @ 4 bar 3.8 1.9 1.1
No Load Lifting Speed (m/min) @ 6 bar 7.5 3.7 2.4
Full Load Lowering Speed (m/min) @ 6 bar 8.3 4.1 2.6
No Load Lowering Speed (m/min) @ 6 bar 6.8 3.4 2.2
Air Consumption (m3/min) @ 6 bar 4 4 4
Air Consumption (m3/min) @ 4 bar 2.6 2.6 2.6
Air Connection: Toggle & Pilot Pendant Control G1 G1 G1
E/Stop Pilot Pendant Control G3/4 G3/4 G3/4
Supply Hose (Inside Dia. mm) 25 25 25
Sound Level (db(A)): Full Load Lifting @ 6 Bar 81 81 81
Sound Level (db(A)): Full Load Lowering @ 6 Bar 83 83 83

* Weight of TAH33 model includes 3m lift, 2m toggle control.

Products of Possible Interest

Pneumatic Travel Mono-rail Hoists, 4 Tonne to 16 Tonne
JDN "UH" Monorail Ultra Low Air Hoists with Air Trolley
German manufactured Pneumatic Hoists with Pneumatic Trolley Suspension, Overload Protection by main air supply cut-off, 500kg to 30 Tonne
Hadef "APP" Air Hoists with Air Powered Trolley
140kg Tool Handling Pneumatic Hoist . Ideal for Work Benches and Small Applications.
Red Rooster Bench Handling Air Hoist
Pneumatic Hoists suitable for fleeting / oblique pulling, 250kg to 2 Tonne
Tiger "TAHS" Air Hoists
German manufactured Pneumatic Hoists Low headroom configuration 28/06 APP with Pneumatic Travel Trolley Suspension, 500kg to 40 Tonne
Hadef "APP" Low Headroom Air Hoists with Air Powered Trolley
German manufactured pneumatic air hoists with overload protection. 500kg to 30 tonne.
Hadef "APS" Stationary Air Hoists
Contact Us About This Product

LiftingSafety uses cookies to improve your user experience,
To accept this, please click the 'accept' button below.

Find out more