Tractel Guard Trac™ Plus Stand Alone Safety Rail / Barrier

With the increased number of solar panels being installed, combined with the growing number of HVAC and other installations located on roofs, there is a strong increase in the number and frequency of people requiring access to roofs that were barely visited in the past. This often requires a different approach to safety.

Organisations have a legal responsibility to protect their employees from harm. The Working at Height Regulations require that a risk assessment should always consider how work at height can be avoided. When this is not possible, collective measures, including guardrails, working platforms or nets, should always take priority over Personal Fall Protection Equipment (PFPE).

The Tractel Guard Trac™ Plus is a barrier / safety rail modular system very similar to the more basic Tractel Guard Trac™, however the 'Plus' system is certified to both EN 13374-A:2019 and the EN ISO 14122-3:2016. To look at there is hardy any difference other than an additional bracing in the middle of the barrier section, which allows for the additional certification.

Certified for installation on flat roof with the following roof sealant: EPDM, Bitumen, PVC in wet and dry condition.

No tools are required for the installation. The design and lightweight of each component guarantee an easy and fast installation.

It is forbidden, to install the guard trac™ system on the edge of a flat roof without a parapet with a minimum height of 150mm.

The system is limitless and can is supplied as a complete kit to your required needs.... you just need to measure the length of the area required (spare / additional parts are readily available).

• No risk of water penetration as no drilling is required for the installation.
• Thanks to our unique design, the installation is completely tool free.
• Made in aluminium to ease the handling during the installation.
• Thanks to our unique design, no tool is required and the simplicity of the components offer an easy and fast installation: only 1minute/meter
• Uniquely designed bracket that integrate a patent-protected self-locking mechanism ensure that angle locking of the barriers.
• The cones are designed to lock the barrier inside the bracket that nobody can remove unintentionally any barrier.
• Can be adapted to the shape of nearly every building, working area, construction area or any area to be secured.
• Can be installed on flat and inclined surfaces. The inclination is limited to 10°.
• The brackets are delivered in red rendered colour but other colours are available upon request.
• The barriers are delivered in a natural aluminium finish but other colours are also available upon request.