LIFTINGSAFETY
  1. Home/
  2. Lifting Equipment/
  3. Rigging Gear; Riggers Lifting Equipment/
  4. Snatch Blocks, Sheave Blocks and Crane Pulley Blocks/
  5. Other Lifting Pulley Wheels/
  6. Tractel "Poulistop" Builders Gin Wheel with Brake - 50kg Capacity
Tractel "Poulistop" Builders Gin Wheel with Brake - 50kg Capacity

Tractel "Poulistop" Builders Gin Wheel with Brake - 50kg Capacity

Manual safety pulley system with brake designed for temporary lifting installations on construction sites.

Model: 

Poulistop 2 / TBGW-4445

Tractel "Poulistop" Builders Gin Wheel with Brake - 50kg Capacity

Tractel Safety Pulley Poulistop2 Shows Brake Poulistop In Use Poulistop Scaffold Arm Poulistop Rope Poulistop Safety Pulley With Ring Scaffold Bracket Scaffold Clap Suspension Hook Suspension

The Poulistop has an integrated braking system which allows you, the user, to effortlessly lift up to a capacity of 50kg. The Poulistop offers iteself as a safer and more secure alternative to a Gin Wheel.

POULISTOP2 is designed for temporary lifting installations on construction sites. It is designed for manual lifting up to 50 kg WLL (load + rope), and is to be used with a braided nylon rope (Ø 18 to 20 mm) for lifting heights up to 30 meters. It iss equipped with its own unique rope blocking system using a sliding plastic brake, lockable and unlockable by the remote user by acting on the rope. It is then possible for the user to maintain the load in suspension without any effort.

Built with a zinc coated steel structure and a polymere sheave and brake. This in order to prevent from corrosion. The pulley weighs only 4 kgs (without the rope) for manipulations without difficulties. The braided nylon rope has a diameter of 18-20 mm

The rope’s blocking is ensured by a striated brake which slides along a vertical axis and acts by wedging on the rope against a metal axis.

The load applied to the rope tends to take up the slack side of the rope. When the slack side of the rope is vertical, it involves with him the brake, which then exerts an effort of wedging on the rope, which locks in position. So the resisting force of the rope is directly proportional to the load.

In order to free the rope, the operator has to apply to the slack side of the rope an angle of 15°approximately. Then the brake will be released.

The POULISTOP 2 is a non-opening pulley therefore the rope has to be introduced between the flanges by guiding it. The height of the flanges is important and permits a simple installation of the rope.

Features and Specifications

  • Available with two suspension options: hook suspended or scaffold clamp (ring) for fixing to scaffold arm accessory.
  • Complies to CE 2006/42
  • All components are corrosion resistant
  • The rope supplied with (if opted for) is manfuctured from nylon which is resistant to water and rotproof
  • 18mm rope (optional) is supplied in 50m lengths
  • Scaffold arm attachment is available as an optional extra
  • Maintenance is easy as no greasing is required and the unit can be easily cleaned with water
  • The ultimate load is 4 times the working load limit
  • Weighs approximately 4kg (pulley only)
  • Maximum acceptable load : 50 kg (including weight of the rope of about 0,3kg/m)

How it works

The Poulistop rope blocking system works by a brake which slides along a vertical axis and acts by wedging on the rope against a metal axis. When the slack side of the rope is vertical, it engages the brake, which then exerts an effort of wedging on the rope, which locks in position. So the resisting force of the rope is directly proportional to the load. In order to free the rope the operator has to apply a 15° angle to release the brake.

Additional Information

The effectiveness of blocking is guaranteed by the contact between the rope and the brake. Consequently, these two elements must be the subject of a routine inspection, and be replaced if necessary. In any event, the installation of a new rope must be accompanied by the replacement of the brake.

The blocking of the load enables the operator to stop the movement of rise or descent by ensuring them resumption of the load.

This is only for assisting the operator, it is not allowed to leave the load in suspension without monitoring.

The rope’s blocking must always be engaged before releasing the slack side of the rope: if not, during a operation (voluntary or not), the brake will function (provided that the slack side can be repositioned vertically) but the stopping distance of the load can strongly vary according to the conditions of use, and in addition an accelerated wear of the components of blocking (cam, cord) is to regret.

The POULISTOP 2 brake has to be free from grease and has to rotate freely. This piece has to be cleaned regularly. We advise not to use the POULISTOP 2 at temperatures below zero degrees.

Always ensure that the mechanical resistance of anchorage point of a POULISTOP 2 accept at least 108 kg.

  • NEVER USE FOR PERSONNEL LIFTING
  • The operator is not authorised to release the rope or leave equipments out of control when a load is hanged up on a pulley.
  • Strictly forbidden to either be under or to walk under the load.
  • Always use suitable rope (size, length and capacity)
  • Always suspend the load on the indicated side (see marking on pulley)
  • The pulley should be regularly inspected (priory checking : parts correctly assembled, no excessive movement, no excessive wearing or corrosion, no deformation, free rotating sheave)
  • Never use a pulley with a hook as head fitting without ensuring that the safety latch is correctly operated and free from deformation.
  • For lifting operations, the user must refer to the safety rules and regulations applicable to this use
  • Never install POULISTOP 2 as a return pulley
Basic Workings

Pricing

Unit Price

£214.00
Add to Quote Request
Description

+

The Poulistop has an integrated braking system which allows you, the user, to effortlessly lift up to a capacity of 50kg. The Poulistop offers iteself as a safer and more secure alternative to a Gin Wheel.

POULISTOP2 is designed for temporary lifting installations on construction sites. It is designed for manual lifting up to 50 kg WLL (load + rope), and is to be used with a braided nylon rope (Ø 18 to 20 mm) for lifting heights up to 30 meters. It iss equipped with its own unique rope blocking system using a sliding plastic brake, lockable and unlockable by the remote user by acting on the rope. It is then possible for the user to maintain the load in suspension without any effort.

Built with a zinc coated steel structure and a polymere sheave and brake. This in order to prevent from corrosion. The pulley weighs only 4 kgs (without the rope) for manipulations without difficulties. The braided nylon rope has a diameter of 18-20 mm

The rope’s blocking is ensured by a striated brake which slides along a vertical axis and acts by wedging on the rope against a metal axis.

The load applied to the rope tends to take up the slack side of the rope. When the slack side of the rope is vertical, it involves with him the brake, which then exerts an effort of wedging on the rope, which locks in position. So the resisting force of the rope is directly proportional to the load.

In order to free the rope, the operator has to apply to the slack side of the rope an angle of 15°approximately. Then the brake will be released.

The POULISTOP 2 is a non-opening pulley therefore the rope has to be introduced between the flanges by guiding it. The height of the flanges is important and permits a simple installation of the rope.

Features and Specifications

  • Available with two suspension options: hook suspended or scaffold clamp (ring) for fixing to scaffold arm accessory.
  • Complies to CE 2006/42
  • All components are corrosion resistant
  • The rope supplied with (if opted for) is manfuctured from nylon which is resistant to water and rotproof
  • 18mm rope (optional) is supplied in 50m lengths
  • Scaffold arm attachment is available as an optional extra
  • Maintenance is easy as no greasing is required and the unit can be easily cleaned with water
  • The ultimate load is 4 times the working load limit
  • Weighs approximately 4kg (pulley only)
  • Maximum acceptable load : 50 kg (including weight of the rope of about 0,3kg/m)

How it works

The Poulistop rope blocking system works by a brake which slides along a vertical axis and acts by wedging on the rope against a metal axis. When the slack side of the rope is vertical, it engages the brake, which then exerts an effort of wedging on the rope, which locks in position. So the resisting force of the rope is directly proportional to the load. In order to free the rope the operator has to apply a 15° angle to release the brake.

Additional Information

The effectiveness of blocking is guaranteed by the contact between the rope and the brake. Consequently, these two elements must be the subject of a routine inspection, and be replaced if necessary. In any event, the installation of a new rope must be accompanied by the replacement of the brake.

The blocking of the load enables the operator to stop the movement of rise or descent by ensuring them resumption of the load.

This is only for assisting the operator, it is not allowed to leave the load in suspension without monitoring.

The rope’s blocking must always be engaged before releasing the slack side of the rope: if not, during a operation (voluntary or not), the brake will function (provided that the slack side can be repositioned vertically) but the stopping distance of the load can strongly vary according to the conditions of use, and in addition an accelerated wear of the components of blocking (cam, cord) is to regret.

The POULISTOP 2 brake has to be free from grease and has to rotate freely. This piece has to be cleaned regularly. We advise not to use the POULISTOP 2 at temperatures below zero degrees.

Always ensure that the mechanical resistance of anchorage point of a POULISTOP 2 accept at least 108 kg.

  • NEVER USE FOR PERSONNEL LIFTING
  • The operator is not authorised to release the rope or leave equipments out of control when a load is hanged up on a pulley.
  • Strictly forbidden to either be under or to walk under the load.
  • Always use suitable rope (size, length and capacity)
  • Always suspend the load on the indicated side (see marking on pulley)
  • The pulley should be regularly inspected (priory checking : parts correctly assembled, no excessive movement, no excessive wearing or corrosion, no deformation, free rotating sheave)
  • Never use a pulley with a hook as head fitting without ensuring that the safety latch is correctly operated and free from deformation.
  • For lifting operations, the user must refer to the safety rules and regulations applicable to this use
  • Never install POULISTOP 2 as a return pulley
Basic Workings
Downloads

+
POULISTOP 2 - T 6115 GB.pdf

Technical Datasheet

(approx. 0.3Mb)

Products of Possible Interest

Light pulley block with captivated hook and built in RFID chip. To suit wire line sizes between 8 and 19mm.
Yoke 502 Series Snatch Block with Hook - Range from 2000kg to 8000kg
Lebus Heavy Duty Snatch Blocks.
Crosby 'L160' Lebus Pulley Sheave Snatch Blocks, Hook, Shackle or Tail Board Options, WLL Range from 6000kg to 12,000kg
McKissick Super Champion Snatch Blocks.
Crosby McKissick '430', '431' & '407' Super Champion Blocks, Hook Shackle or Tail Board Options, WLL option of 20,000kg or 30,000kg
McKissick Construction Blocks.
Crosby McKissick '680 Series' Construction Crane Sheave Blocks, 3 x Suspension Types & 1-8 Sheave Options - Range from 4500kg to 90,000kg
Heavy Duty Utility Snatch Blocks.
Crosby 'C720' Heavy Duty Pulley Sheave Snatch Block with Hook, WLL 6300kg
Western Diamond & Oval Pattern Regular Wire Rope Blocks.
Crosby Regular Wire Rope Sheave Pulley Block with optional Shackle or Hook, WLL Range from 910kg to 6350kg
Contact Us About This Product

LiftingSafety uses cookies to improve your user experience,
To accept this, please click the 'accept' button below.

Find out more