Search Results for "Abtech"- 497 items found
Not the results you were looking for? Try broaden your search terms.
P+P ''Chunkie'' Single Leg Fall Arrest Rope Lanyard with Large Aluminium Double Action Scaff Hook - 1.75m
P&P 1.75m fixed length kernmantle rope fall arrest lanyard with karabiner and aluminium scaffold snap hook
SALA "Door and Window" Anchorage Bar sizes From 55cm to 130cm in Width
Portable Window and Door Anchorage Bar from 55cm to 130cm.
SALA 2100080 Door and Window Anchorage Bar installs in seconds, providing a fast, simple and safe attachment point for your fall arrest system. Complete peace of mind with this anchor because it is designed to install without compromising the structure in any way, simply compress the device between the vertical sides of the window or door and tighten. Available to fit door or window sizes from 55cm to 130cm.
Zero 'Pinnacle Volt' Multi Impact Electrical Helmet
Industrial use helmet to EN 12492:2012, EN397:2012 & EN50365:2002
Xtirpa IN-2244 Positioning Seat
Positioning seat for worker to sit on while ascending / descending.
Miller "Beam Glide" Adjustable Fall Arrest Anchorage Point Designed to slide Along an RSJ Beam - Width 75mm to 360mm
Fully adjustable beam anchorage device for beams
Tiger "BCB" Bulb-Bar Section Clamps - Range from 1,500kg to 3,000kg
Tiger Bulb-Bar Section Lifting Clamps for 160 - 320mm jaw size.
Miller "Trauma Relief Step" To Help Prevent Suspension Trauma.
Trauma Relief Step that alleviate the effects of suspension trauma, sold in packs of 12 pairs.
Protecta Harness Extension Strap
Anchor Point Webbing Extension Lanyard
P+P Kernmantle Rope Rat Work Positioning Lanyard with Screwlock Oval Link and Captive Aluminium Kwiklok Karabiner Other - 2m
P&P Adjustable restraint or work positioning lanyard to ensure that the correct length can be selected for the task in hand.
Lanyard suitable for restraint or work positioning
Camlok "TSZ" Two-Way Pulling Screw Clamp Range 500kg to 7500kg
With two lifting points
The Camlok series of screwcam clamps can be used on all structural steel plates and sections up to a surface hardness of 300 Brinell. They offer an easy way of attaching pulling equipment to steel structures and can be used for holding and for the correction of alignment problems. This range of clamps is designed for pulling in three planes. The design allows for simultaneous loading in two directions but not for the transportation of plate.
This series of clamps can be used in any combination or number of combinations required they are available in various sizes, lifting capacities and cap sizes.
P+P ''Chunkie Stretch" Single Leg Elasticated Webbing Fall Arrest Lanyard with Karabiner and Scaffold Hook - 1.75m
P&P single leg stretchable lanyard with screwgate karabiner one end and large aluminium double action scaffod snap hook other.
PP ''Chunkie NG Spec" Single Leg Rope Fall Arrest Lanyard with Aluminium Karabiner and Aluminium Pear Shaped Scaffold Hook - 1.5m
1.5m rope lanyard with webbing protection sleeve covering the kernmantle rope.
Single leg lanyard suitable for arresting potential falls. The lanyard incorporates a "tear-web" energy absorbing pack.
P+P ''Chunkie Fixed Loop'' Single Leg Rope Fall Arrest Lanyard - 2m
P&P Chunkie fixed loop kernmantle rope lanyard with energy absorber.
Single leg lanyard suitable for arresting potential falls. The lanyard incorporates a "tear-web" energy absorbing pack.
Yale Double Action Steel "Screwgate" Corrosion Resistant Karabiner - 18mm Opening
Steel Screwgate Connector used in a vast variety of applications such as rope access and fall arrest with 18mm opening.
It is used in a vast variety of applications such as rope access and fall arrest. The screw gate closure on this device means that the user must manually lock the Karabiner after attachment to an approved anchorage point. With a gate opening of 18mm.P+P ''Chunkie'' Adjustable Single Leg Fall Arrest Webbing Lanyard with Karabiner One End, Snaphook Other - 1.75m
P&P 1.75m adjustable fall arrest lanyard with screwgate connectors both ends.
PP "Chunkie" Single Leg Rope Fall Arrest Lanyard with Steel Screwgate Karabiner Both Ends - 1m
P&P (Pammenter & Petrie) single tail lanyard with energy absorber and steel karabiners at each end.
Single leg lanyard suitable for arresting potential falls. The lanyard incorporates a 'tear-web' energy absorbing pack.
Miller H Design Webbing Extension with Karabiner
Webbing extension for easy connection to rear D-ring supplied with Twistlock Karabiner
Ridgegear "RGR11" Rescue Stretcher Kit From Special Durable Plastic Formula.
Stretcher rescue system is a quick and easy method to ascend or descend to a position of safety
Ridgegear RGR11 Rescue Stretcher comes equipped for hoisting by helicopter in horizontal position or hoisting in vertical position in caves or industrial confined spaces. When the patient is packaged the stretcher becomes rigid. Kit includes - Sked stretcher, Cordura backpack, Horizontal lift slings (pair), Sked tow strap, Removable webbing handles, Steel locking D karabiner, Sked vertical lift sling and a storage bag.
Ridgegear "RGK45" Steel Swivel Double Action Snap Hook. 21mm Gate Opening
Steel automatic snap hook with swivelling captive eye. Designed to be a permanent fixure. 23kN minimum breaking strength.
Yale "Quick Connect" Four Point Fall Arrest Harness with Rear 'D' Ring and 2 x Chest 'D' Rings and Work Positioning Belt
Four point full body harness c/w work positioning belt c/w quick connect buckles. Conforms to EN361/358.
Yale Four Point Quick Connect Harness provided with ront and rear D attachment points, two lateral D rings for work positioning. with a padded back for optimal wearing comfort. Quick connect buckles enables you to attach or detatch the harness in a quick and safe manor. One size only.