LIFTINGSAFETY

Search Results for "Abtech"- 497 items found

Not the results you were looking for? Try broaden your search terms.

Abtech "ABL" Shock Absorbing Lanyard with Karabiners or Snap Scaffold Hook - 2 Metre

2m Webbing Fall Arrest Lanyard with optional end fittings. Complies to EN358 and EN355.

Abtech Slix Rapid Response Stretcher - Max User Weight: 150kg

A simple, low cost, robust stretcher that can be deployed very quickly.

Abtech Large Upper Davit Section - 495mm to 737mm Reach - 1473mm to 1702mm Height

Large Upper Davit, with an adjustable offset. To be used with a Lower Davit and Base.

Abtech AB30T 30m Fall Arrest Inertia Reel Block, 30m. Optional Brackets.

Max user weight: 140kg. Certified to BS EN 360. 30m galvanised cable with snap hook termination.

Abtech Small Upper Davit Section - 495mm to 737mm Reach - 1168mm to 1416mm Height

Small Upper Davit, with an adjustable offest. To be used with a Lower Davit and Base.

Abtech "Slix 100XL" Roll-up Bariatric Rescue Stretcher - Max. User Weight: 400kg

Bariatric stretcher designed for the rescue, transport and evacuation of clinically obese persons

Abtech "Slix 50" Stretcher with Combined Spinal Splint - Max User Weight: 400kg

Designed for difficult confined spaces. The articulated skirt at the bottom of the stretcher can be removed.

Imer 3 Point Scaffold Attachment (for Imer hoists only)

Scaffold hoist attachment for fixing a scaffold hoist to scaffolding. Can be used with Swivel Extensions.

Ensures the correct mounting of the hoist on the scaffold. In comparison to the clamps attachments, the use of this accessory reduces the stress transmitted to the scaffold by spreading the load over a larger area. The scaffold attachment for hoists is also fitted with a pre-aligned-plate for locking the work positioning lever.

Abtech Safety "Slix 100" Roll-up/Roll-able Rescue Stretcher - Max. User Weight: 400kg

The flexible material combined to a smooth finish allows easy sliding and permits the stretcher to be rolled width-ways or length-ways to facilitate transport.

"Six Fork" Fork Truck Attachment, Fixed Tines (Not Adjustable) Made To Customers Specifications.

Six Fork Attachment.

This is designed to increase the load stability when handling extra wide pallets or products, or to carry three pallets alongside each other. The truck forks slide into the inner sleeves and the 4 outer forks support and balance the load for safety and the reduction of production damage. The attachment fork length must not exceed truck fork length by more than 50%.

Fork Lift Truck Big Bag Handler Attachment - 1000kg

Fork lift truck big / bulk bag handler attachment for the handling of standard big bags.

This attachment has been specifically designed for the handling standard big bags, this forklift bag handler allows bags to be lifted by the loops. The loops are located in claws set on each corner enabling quick and easy loading, unloading and transportation of big bags. The big bag handler is secured on to the forks of the truck using heel pins.

Fork Lift Truck Tine "Coil Support" Attachment Closed base Design - 1525mm to 1830mm

Coil Support Attachment.

The forklift coil lifter slips over both forks simultaneously to give greater bearing area for the carrying of larger steel coils, rolls of wire, sheet polythene etc. Through use of this forklift coil attachment, product damage to the internal core of the rolls caused by the forklift forks can be reduced and prevented. This particular forklift coil lifter is designed to slip over 100mm wide forks (pushed together) giving a total length of 1525mm.

"Four Fork" Forklift Truck Attachment, Fixed Tines (Non-Adjustable) Made To Customers Specification

Four Fork Attachment.

This is the solution to wide load handling. This is designed for use when handling extra wide pallets or long product such as steel or plastic pipes, steel flats, plastic extrusions or timer. The truck forks slide into the inner sleeves and the outer forks support and balance the load for safety and the reduction of product damage. The attachment fork length must not exceed the truck forks length by more than 50%.

LiftingSafety uses cookies to improve your user experience,
To accept this, please click the 'accept' button below.

Find out more