LIFTINGSAFETY

Search Results for "Protecta"- 572 items found

Not the results you were looking for? Try broaden your search terms.

Hi-Force 'HPC' Single Acting Hydraulic Pull Cylinders, 10,000kg to 50,000kg

700 Bar Hydraulic Pulling Cylinders, Stroke Length 152mm, Capacities from 10 to 50 Tonnes

Sala Counterweight Overhead Rail Fall Arrest System - A Versatile Fall Arrest Solution for Working at Heights

Overhead horizontal rail fall arrest gantry system for working at height on a tanker/vehicle. CE certified.

Tractel "HT Promast" 5 Point Rope Access Harness with Front and Rear Connection Points and Work Positioning Belt

Designed for work on ropes during extended-duration suspended interventions. 2 fall arrest points, 1 belly suspension point and 2 working positioning points on belt.

LiftingSafety Fall Arrest Inertia Reel Block with Retrieval/Rescue Hand Chain Wheel - Galvanised Cable - Options from 12 to 60 metres.

Retractable "self retracting lifeline" (SRL) fall arrest block with chain wheel rescue function. 6 different lengths. Complies to EN360 and EN1496.

Ridgegear "RGH17" 5-Point Rope Access Harness with Front, Rear, Side and Ventral Attachment Points

Premium Y-shaped rope access harness with support pads on the legs, waist and shoulders. 6 built-in tool loops.

Ridgegear "RGH5" 3-Point Fall Arrest & Rescue Harness to EN361 and EN1497

3 point safety harness fitted with front, rear and right-hand side shoulder rescue attachment points. Optional fast fit buckles.

Verlinde VLA Wind Turbine Electric Chain Hoist

High-speed electric hoists suitable for use with power supply's up to 690v for use on wind turbines. 160kg to 1 tonne.

Options on Wind Turbine Chain Hoist: Safe working load, trolley required, height of lift is 16 to 80 metres.

Wide range of lifting speeds:16 and 4 m/min, 24 & 6 m/min and 32 & 8 m/min, upper and lower electric limit switches

Brake clutch system: DC electromagnetic disk brake made to last as long as the hoist itself.

Hook: Upper hook (detachable) and lower hook complies with DIN standard, Motor: Thermal protection

Pfaff "LB" Manual Spur Gear Hand Winch

150kg to 1200kg galvanised or stainless steel base mounted wire rope hand winches.

The friction disk brake equipped with a shuttle valve on our wire rope winch prevents from unintentional lowering of the load in every position. The galvanized wire rope winches with tension loads of 150kg, 350kg, 650kg, 900kg, 1200kg have been galvanized in order to improve corrosion protection.

William Hackett "ATEX C4" Chain Block

Hackett Atex certified manual hand chain hoist suitable for potentially explosive environments. 0.5t to 5t.

Yale "YLLHP" & "YLLHG" Extra Low Headroom Beam Trolley Hoist

Ultra low headroom manual chain hoist with built-in push or geared beam trolley. Corrosion and spark resistant options available.

The YaleLift LH hoist series are available with a geared trolley or push trolley with options for standard finish, corrosion resistant or with a spark resistant finish. The combination of the Yale low headroom hand chain hoist with integrated push trolley or geared trolley.

Capacities Available: 500kg, 1 tonne, 2 tonnes, 3 tonnes, 5 tonnes and 10 tonnes (geared only).

Yale "HTP" & "HTG" SR ATEX Spark Resistant Beam Trolley (Push and Geared Travel Options) - Range from 500kg to 10,000kg

Spark Resistant, Quick Fit Push and Geared Travel (chain drive) Beam Trolleys.

Yale ATEX Beam trolley for potentially explosive environments, EX, spark-proof. Corrosion resistant with rubber buffers fitted and solid bronze trolley wheels. Options as push travel and geared travel (chain drive). Can be fitted with track clamp for locking the trolley on to the lifting beam.

A beam trolley enables the exact positioning or easy traversing of large loads with either manual or powered hoisting equipment. It has excellent controlling features due to machined steel wheels mounted on pre-lubricated, encapsulated ball bearings. All trolleys conform to ATEX Group II, surface. Category. Zone 1. Explosion group IIB. Temperature class T4(T3). The HTP/HTG SR beam runners are adjustable to fit a wide range of beam widths and profiles. The trolley wheels are designed for a max. beam profile incline of 14%.

Fork Truck Mounted Roll Forward Packaging Skip. 700 Litre to 2500 Litres - 1000kg to 1500kg

Packaging Skip, Ideal for handling rubbish of high volume, low weight material, such as paper, packaging materials etc.

Manufactured by adding 500mm mesh height extensions on three sides to give higher volume and added rigidity without a significant increase in the weight. Ideal for handling rubbish of high volume, low weight material, such as paper, packaging materials etc. These tipping containers are ideal for recycling areas where paper and card need to be kept separate.

Edge-Guard Temporary Free Standing Guard Rail

Temporary Guard Rail.

Because such systems are normally erected to protect workers, this simple patented design is easy to work around. Support legs can be raised when working up to a roof edge, while the counterbalances on the swing arms can be moved from side to side allowing easy access with no safety compromise. And because it works from roof level, there's no need for expensive scaffolding and eliminates risk of intruders from ground level.

SALA "Ultra Lok RSQ" Automatic (Manual) Descender / Fall Arrest Inertia Reel Block (Fall Limiter) Steel Cable Lanyard with Snap Hook - 15m

Retractable (Self retracting) Lifeline (SRL) with Rescue Device, 15m rope length stainless steel or galvanised. EN360 (fall arrest) and EN341 (Auto descent)

Exclusive design provides both fall arrest with assisted rescue capabilities and automatic self rescue for ultimate versatility. When in Fall arrest mode, the Unit stops falls within few decimetres and limits the forces to 6kN for less for added safety. Features Assisted rescue procedures can then be implemented either at the mode selector or remotely with a First-Man-Up™ pole. Self rescue mode automatically lowers the user to the next level after a fall. Lightweight and long lasting durable reinforced plastic housing. Incorporates a built-in carrying handle for easy transportation. 15 m cable extends and retracts automatically enabling the user to move around the work area protected. i-Safe™ Intelligent Safety System is built-into every unit to track inspections, control inventory and manage information. Designed to meet worldwide standards including CE EN360 and EN341.

Ridgegear "RGL5" Fixed Length Webbing Restraint Lanyard. 1m, 1.4m or 1.8m

Single leg non-adjustable web work restraint lanyard with a wide variety of connector options.

Ridgegear RGL5 Fall Restraint Lanyard is to act as a leash for an operative working at height to prevent possibility of risk of a fall. It is important to understand the principles of "fall restraint" as the RGL5 can only be used for fall restraint, as there is no shock absorption built into the system. If there is any possibility of an operative falling, a fall arrest product must be used.

Ridgegear "RGL14" Twin Leg Fixed Length Restraint Lanyard. 1.4m or 1.8m

Two leg non-adjustable web work restraint lanyard with a choice of connectors.

Ridgegear RGL14 Twin Leg Restraint Fall Arrest Lanyard should be used when the operative is working from a static position, connected to a fixed anchor point. Movement between anchorages can be achieved by means of double clipping.

"SPB 500lb Series" Linear Actuator

Heavy duty linear actuator with option for weather resistant sealant.

Tractel "HT Electra" Linesman Harness with Rear 'D' Ring, Front Chest Webbing Loops for Fall Arrest and 2 Large 'D' Rings on Belt for Work Positioning

Designed for work in the utilities industry, on pylons where a high degree of mobility is required, ensuring high amplitude of rotation (150°).

JDN Profi TI Subsea Air or Hydraulic Chain Hoist For Use Under Water

Hook suspended subsea pneumatic / hydraulic chain blocks. 3200kg or 6300kg.

Standard units can be used to depths of 55 metres, however these units are also available to be used down to a water depth of 70m. Highly regarded as a very versatile hook suspended tool, they can also be used for horizontal and oblique use. Other capacities are available on request.

Available as air or hydraulically powered units, with variable speed control and overload protection as standard.

LiftingSafety uses cookies to improve your user experience,
To accept this, please click the 'accept' button below.

Find out more