Wire Rope Sheaves

Pfaff DSRS Sheaves - Range from 800kg to 3800kg

Pfaff wire rope pulleys with sheave diameters from 145mm to 490mm and rope diameters from 5mm to 18mm.

DSRS Sheaves / PS-3161

From £75.35

Crosby McKissick Tapered Bearing Pulley Sheaves

McKissick Tapered Bearing Sheaves.

TBS-2514

Request Quote

McKissick® Tapered Bearing Sheaves are designed to operate on shafts machined to +/- .0005 of the indicated shaft size. Applications should provide for tightening separator plates against bearing cones to adjust and insure proper function of bearing. For sizes not listed, McKissick® Finished Bore Sheaves can be equipped with tapered Bearings at an addtional charge.

Roll Forged™ sheaves are available in sized up to 72" in diameter

Crosby McKissick Common Bore Pulley Sheaves

McKissick Common Bore Sheaves.

CBS-2511

Request Quote

The McKissick Stepped hub eliminates stress failure in the weld, common in normal hub designs. The hub is pressed into place with complete metal-to-metal contact. This helps ensure an accurate alignment to the hubs axis so there's no wobble or lopping of the rotating sheave.

Crosby McKissick Finished Bore Pulley Sheaves

McKissick Finished Bore Sheaves.

FBS-2510

Request Quote

McKissick Finished Bore Sheaves can be equipped with bushings or bearings at an optional charge. Roll Forged sheaves are available in sized up to 72" in diameter. 14" diameter sheaves and larger are Roll Forged with Flame hardened grooves to minimum Rockwell 35C.

Crosby McKissick Bronzed Bushed Pulley Sheaves

McKissick Bronzed Bushed Sheaves.

BBS-2512

Request Quote Roll Forged sheaves are available in sizes up to 72" in diameter. McKissick Bronze Bushed Sheaves are equipped with S.A.E. 660 Bronze Bushings for cold finished shafts with "Figure 8" oil groove. For sizes not listed, McKissick Finished Bore Sheaves can be equipped with bronze bushings at an optional charge.

Crosby McKissick Roller Bearing Pulley Sheaves

McKissick Roller Bearing Sheaves.

RBS-2513

Request Quote Roll Forged™ sheaves are available in sized up to 72" in diameter. McKissick® Roller Bearing Sheaves are designed to operate on shafts carbonized to 660 Rockwell "C" and ground to +/- .0005 of the indicated shaft size. Some sizes are available with an optional inner race.  For sizes not listed, McKissick® Finished Bore Sheaves can be equipped with roller bearings at an additional charge.