Pewag "PLAW Alpha" Bolt-on Swivel Lifting Point.

This lifting point is 360° rotatable. The load ring is loadable in a wide range and can be positioned at any required angle due to its replaceable and patented spring.

The hexagonal special screw is also replaceable and secured against loss.

The PLAW pewag winner profilift alpha screw is made from 10.9 grade material, 100% crack-tested, covered with a chromate VI-free protection agent against corrosion and marked with the load capacity and thread size.

Pewag winner profilift alpha swivel lifting points are able to withstand a 4-fold safety factor against break in all directions and every single lifting point is marked with an individual serial number. .

Available with a metric or UNC-thread. The versions with metric thread are also available with customised thread lengths.

All load capacities, categorised by type of application, the number of legs and angle of inclination, are contained in a table (see below) that forms an integral part of the operating manual included with each lifting point.

Also available with peTAG (RFID tag) upon request.

PLAW Lifting Point Styles

Please refer to the .step files on the downloads tab for accurate and size specific style.

Pewag PLAW Alpha 0.3t to 1.5t and 4t (Not 2.5t or above 4t)

Pewag PLAW Alpha 2.5t to 20t, excluding 4t (Not 1.5t, below 1.5t or 4t)

Permitted usage

For load capacities in the permitted directions of pull, please refer to the load capacity table.

Non-permitted usage

During assembly, ensure that improper loading cannot arise due to any of the following factors:

Direction of pull is obstructed.

Direction of pull is not within the indicated area.

Loading ring rests against edges or loads.

The load ring must be placed in the direction of pull before loading – do not turn under load! For additional details and information, please refer to the full operating manual.

Custom Thread Lengths (Metric Only)

Calculating the required thread length (L) for custom or maximum thread lengths:

L = H + S + K + X

H = Material height

S = Thickness of the washer

K = Height of the nut (depending on the thread size of the screw)

X = Excess length of the screw (twofold pitch of the screw)

L max. = n max.

In addition to the standard and maximum thread lengths, pewag also offers cut-to-length thread lengths. Customised and maximum thread lengths are supplied with a washer and a screw nut.

For detailed information such as method of lifting, number of legs, angle of inclination etc., please refer to the tables with technical data.

Specifications

Metric

Code / Type	Thread (mm)	Load capacity (kg)	a (mm)	b (mm)	c (mm)	d (mm)	e (mm)	g (mm)	h (mm)	k (mm)	n (mm)	n max (mm)	(mm)	(mm)	Weight (kg / pc.)
PLAW 0,3t	M8	300	45	67	40	11	41	95	36	55	20	150	10	24	0.57
PLAW 0,63t	M10	630	45	67	40	11	41	95	36	55	20	150	10	24	0.58
PLAW 1t	M12	1,000	45	67	40	11	41	95	36	55	20	170	10	24	0.60
PLAW 1,5t	M16	1,500	45	67	40	11	41	95	36	55	24	260	10	24	0.60
PLAW 2,5t	M20	2,500	54	81	50	13	55	112	50	67	33	335	8	24	1.10
PLAW 4t	M24	4,000	54	87	50	17	67	142	45	70	36	361	14	36	1.60
PLAW 6t	M30	6,000	68	108	60	20	68	148	55	85	45	360	14	36	2.50
PLAW 7t	M36	7,000	75	115	67	20	65	143	60	100	55	374	27	-	3.30
PLAW 8t	M36	8,000	93	147	85	27	87	188	85	120	55	365	19	41	3.80
PLAW 10t	M42	10,000	93	147	85	27	87	188	85	120	65	365	19	41	4.80
PLAW 15t	M42	15,000	115	181	105	33	108	246	106	150	63	340	19	55	12.00
PLAW 20t	M48	20,000	115	181	105	33	108	246	106	150	73	340	19	55	12.30

Imperial (UNC)

Code / Type	Thread (in.)	Load capacity (lbs)	a (in.)	b (in.)	c (in.)	d (in.)	e (in.)	g (in.)	h (in.)	k (in.)	n (in.)	n max  (in.)	(in.)	(in.)	Weight (lbs / pc.)
PLAW U 3/8"	3/8"-16	1,400	1.77	2.64	1.57	0.43	1.61	3.72	1.42	2.17	0.79	-	3/8"	15/16"	1.30
PLAW U 1/2"	1/2"-13	2,200	1.77	2.64	1.57	0.43	1.61	3.72	1.42	2.17	1.30	-	3/8"	15/16"	1.32
PLAW U 5/8"	5/8"-11	3,300	1.77	2.64	1.57	0.43	1.61	3.72	1.42	2.17	1.30	-	3/8"	15/16"	1.39
PLAW U 3/4"	3/4"-10	4,400	2.13	3.19	1.97	0.51	2.24	4.21	1.97	2.64	1.30	-	9/16"	-	2.40
PLAW U 1"	1"-8	8,800	2.95	4.53	2.64	0.79	2.68	5.63	2.64	3.94	1.42	-	3/4"	-	6.60
PLAW U 1-1/4"	1-1/4"-7	13,200	2.95	4.53	2.64	0.79	2.68	5.63	2.64	3.94	1.93	-	7/8"	-	6.80
PLAW U 1-1/2"	1-1/2"-6	17,600	3.66	5.79	3.35	1.06	3.35	7.40	3.35	4.72	2.17	-	1-1/2"	3/4"	13.70
PLAW U 1-3/4"	1-3/4"-5	22,000	3.66	5.79	3.35	1.06	3.43	7.40	3.35	4.72	2.44	-	1-1/4"	-	14.10

Load Charts

Metric

Method of lifting
Number of legs			1	1	2	2	2	2	3+4	3+4	2	3+4
Angle of inclination			0°	90°	0°	90°	0‑45°	45‑60°	0‑45°	45‑60°	asymm°	asymm°
Code / Type	Thread (mm)	Fastening torque (Nm)	Load capacity (kg)
PLAW 0,3t	M8	35	300	300	600	600	400	300	600	400	300	300
PLAW 0,63t	M10	70	630	630	1,260	1,260	850	630	1,300	900	630	630
PLAW 1t	M12	120	1,000	1,000	2,000	2,000	1,400	1,000	2,100	1,500	1,000	1,000
PLAW 1,5t	M16	150	1,500	1,500	3,000	3,000	2,100	1,500	3,100	2,200	1,500	1,500
PLAW 2,5t	M20	170	2,500	2,500	5,000	5,000	3,500	2,500	5,300	3,700	2,500	2,500
PLAW 4t	M24	400	4,000	4,000	8,000	8,000	5,600	4,000	8,400	6,000	4,000	4,000
PLAW 6t	M30	500	6,000	6,000	12,000	12,000	8,500	6,000	12,700	9,000	6,000	6,000
PLAW 7t	M36	700	7,000	7,000	14,000	14,000	9,800	7,000	14,800	10,500	7,000	7,000
PLAW 8t	M36	800	8,000	8,000	16,000	16,000	11,300	8,000	16,900	12,000	8,000	8,000
PLAW 10t	M42	1,500	10,000	10,000	20,000	20,000	14,000	10,000	21,000	15,000	10,000	10,000
PLAW 15t	M42	1,500	15,000	15,000	30,000	30,000	21,000	15,000	31,500	22,500	15,000	15,000
PLAW 20t	M48	2,000	20,000	20,000	40,000	40,000	28,000	20,000	42,000	30,000	20,000	20,000

Imperial (UNC)

Method of lifting
Number of legs			1	1	2	2	2	2	3+4	3+4	2	3+4
Angle of inclination			0°	90°	0°	90°	0‑45°	45‑60°	0‑45°	45‑60°	asymm°	asymm°
Code / Type	Thread (inch)	Fastening torque (ft-lbs)	Load capacity (lbs)
PLAW U 3/8	3/8"-16	52	1,400	1,400	2,800	2,800	1,960	1,400	2,940	2,100	1,400	1,400
PLAW U 1/2	1/2"-13	89	2,200	2,200	4,400	4,400	3,000	2,200	4,600	3,300	2,200	2,200
PLAW U 5/8	5/8"-11	110	3,300	3,300	6,600	6,600	4,600	3,300	6,800	4,800	3,300	3,300
PLAW U 3/4	3/4"-10	125	4,400	4,400	8,800	8,800	6,000	4,400	9,200	6,500	4,400	4,400
PLAW U 1	1"-8	295	8,800	8,800	17,600	17,600	12,300	8,800	18,400	13,200	8,800	8,800
PLAW U 1-1/4	1-1/4"-7	369	13,200	13,200	26,400	26,400	18,700	13,200	27,800	19,800	13,200	13,200
PLAW U 1-1/2	1-1/2"-6	590	17,600	17,600	35,200	35,200	24,900	17,600	37,400	26,400	17,600	17,600
PLAW U 1-3/4	1-3/4"-5	740	22,000	22,000	44,000	44,000	30,000	22,000	45,000	33,000	22,000	22,000
Safety factor 4 Important: Subject to technical changes!