LIFTINGSAFETY
  1. Home/
  2. Lifting Equipment/
  3. General Industrial Lifting Equipment/
  4. Lifting Eye Bolts & Nuts/
  5. Swivel Eye Bolts/
  6. Codipro Swivel Lifting Eye Bolts and Lashing Points/
  7. Codipro "TSR" Double Swivel Lifting Point with Ring
Codipro "TSR" Double Swivel Lifting Point with Ring

Codipro "TSR" Double Swivel Lifting Point with Ring

Male bolt-on double articulated swivel load rings (hoist ring) with integrated secondary link. Metric (M8-M42) or Imperial (5/16" to 1-1/2") thread. 300kg to 22 tonne.

Model: 

TSR / CDSL-5072

Codipro "TSR" Double Swivel Lifting Point with Ring

Codipro Tsr Triple Swivel Ring

The TSR ring is a triple swivel model with two pivots. It can be used for smooth tilting, turning and flipping, The optimised design prevents any damage to the sling and load while the ring is swivelling and ensures perfect alignment with the sling. However, the TSR triple swivel ring is not recommended for lengthy rotations of full loads.

It consists of a steel ring that has a rotating range of 360°.

TSR Features

  • Swivelling under load
  • 360° rotation
  • 180° articulation
  • Safety factor of 5:1
  • Safety factor of 4:1
  • Control anti-crack on 100% of products
  • Fatigue test
  • Two ways of tightening
  • Individual traceability number
    • Use Coditracer to verify the authenticity of your Codipro lifting point or access user instructions, technical literature, angle load charts, the certificate of conformity, the inspection procedures or to guarantee your Codipro products.
  • Other variants available on request
  • Each ring is accompanied with use recommendations
  • Delivery with certificate of compliance
  • Certified ISO 9001
  • Certified ISO 14001
  • Tested according to standard EN 1677-1

Dimensions & Specifications - TSR Metric Thread

Reference Diameter SF 5:1 WLL (t) Standard L1 (mm) Torque (Nm) X (mm) S1 (mm) S2 (mm) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) H (mm) Weight (kg)
TSR M 8 M 8 (x1,25) 0,30 14 6 18 8 16 33 56 30 41 25 10 58 9,5 0,4
TSR M 10 M 10 (x1,50) 0,60 17 10 18 8 16 33 56 30 41 25 10 58 9,5 0,4
TSR M 12 M 12 (x1,75) 1,00 21 15 18 8 16 33 56 30 41 25 10 58 9,5 0,4
TSR M 14 M 14 (x2) 1,30 23 30 24 8 20 45 81 45 56 37 14 79 13,0 1,1
TSR M 16 M 16 (x2) 1,60 27 50 24 8 20 45 81 45 56 37 14 79 13,0 1,2
TSR M 18 M 18 (x2,5) 2,00 27 70 24 8 20 45 81 45 56 37 14 79 13,0 1,2
TSR M 20 M 20 (x2,5) 2,50 30 100 24 8 20 45 81 45 56 37 14 79 13,0 1,2
TSR M 22 M 22 (x2,5) 3,00 33 120 45 14 24 62 105 60 80 45 20 106 19,0 2,8
TSR M 24 M 24 (x3) 4,00 36 160 45 14 24 62 105 60 80 45 20 106 19,0 2,9
TSR M 27 M 27 (x3) 5,00 36 200 45 14 24 62 105 60 80 45 20 106 19,0 2,9
TSR M 30 M 30 (x3,5) 6,30 45 250 45 14 24 62 105 60 80 45 20 106 19,0 3,0
TSR M 36 M 36 (x4) 10,00 54 320 54 19 30 81 140 80 111 71 30 148 26,5 7,6
TSR M 42 M 42 (x4,5) 12,50 63 400 58 19 30 84 146 80 111 71 30 148 26,5 7,8
                                 
Reference Diameter SF 4:1 WLL (t) Standard L1 (mm) Torque (Nm) X (mm) S1 (mm) S2 (mm) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) H (mm) Weight (kg)
TSR M 48 M 48 (x5) 20,00 68 600 69 19 30 100 178 110 135 90 42 180 33,0 17,5
TSR M 56 M 56 (x5,5) 22,00 78 600 73 19 30 104 184 110 135 90 42 190 33,0 18,0

Dimensions & Specifications - TSR UNC Threads

Reference Diameter SF 5:1 WLL (t) Standard L1 (mm) Torque (Nm) X (mm) S1 (mm) S2 (mm) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) H (mm) Weight (kg)
TSR U 516 UNC 5/16"-18 650 15 7 18 8 16 33 56 30 41 25 10 58 9,5 0,4
TSR U 038 UNC 3/8"-16 1200 17 8 18 8 16 33 56 30 41 25 10 58 9,5 0,4
TSR U 050 UNC 1/2"-13 2200 21 12 18 8 16 33 56 30 41 25 10 58 9,5 0,4
TSR U 058 UNC 5/8"-11 3800 27 40 24 8 20 45 81 45 56 37 14 79 13,0 1,1
TSR U 075 UNC 3/4"-10 5500 30 80 24 8 20 45 81 45 56 37 14 79 13,0 1,2
TSR U 078 UNC 7/8"-9 6600 33 90 41 14 24 62 84 60 80 45 20 106 19,0 2,7
TSR U 100 UNC 1"-8 10,000 36 125 41 14 24 62 84 60 80 45 20 106 19,0 2,8
TSR U 125 UNC 1" 1/4-7 14,000 46 200 41 14 24 84 146 80 111 71 30 106 26,5 7,1
TSR U 150 UNC 1" 1/2-6 20,000 61 240 54 19 30 84 146 80 111 71 30 148 26,5 7,7
                                 
Reference Diameter SF 4:1 WLL (t) Standard L1 (mm) Torque (Nm) X x X S1 (mm) S2 (mm) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) H (mm) Weight (kg)
TSR U 200 UNC 2" 4,5 50,000 76 450 66 19 30 104 184 110 135 90 42 190 33,0 17,7
Codipro TSR Dimensions
Part N° Thread Size Thread Length (L1) (mm) WLL (t) Weight (kg) Minimum Order Qty Unit Price Quantity
5072-T25963 M8 (x1,25) 14 0.3 0.4 1-piece £  81.00
5072-T25964 M10 (x1,50) 17 0.6 0.4 1-piece £  82.00
5072-T25965 M12 (x1,75) 21 1 0.4 1-piece £  84.00
5072-T25966 M14 (x2) 23 1.3 1.1 1-piece £  99.00
5072-T25967 M16 (x2) 27 1.6 1.2 1-piece £  99.00
5072-T25968 M18 (x2,5) 27 2 1.2 1-piece £  110.00
5072-T25969 M20 (x2,5) 30 2.5 1.2 1-piece £  110.00
5072-T25970 M22 (x2,5) 33 3 2.8 100-pieces Quote Required
5072-T25971 M24 (x3) 36 4 2.9 100-pieces Quote Required
5072-T25972 M27 (x3) 36 5 2.9 100-pieces Quote Required
5072-T25973 M30 (x3,5) 45 6.3 3 100-pieces Quote Required
5072-T25974 M36 (x4) 54 10 7.6 100-pieces Quote Required
5072-T25975 M42 (x4,5) 63 12.5 7.8 100-pieces Quote Required
5072-T25976 M48 (x5) 68 20 17.5 1-piece £  693.00
5072-T25977 M56 (x5,5) 78 22 18 1-piece £  732.00
   
Description

+

The TSR ring is a triple swivel model with two pivots. It can be used for smooth tilting, turning and flipping, The optimised design prevents any damage to the sling and load while the ring is swivelling and ensures perfect alignment with the sling. However, the TSR triple swivel ring is not recommended for lengthy rotations of full loads.

It consists of a steel ring that has a rotating range of 360°.

TSR Features

  • Swivelling under load
  • 360° rotation
  • 180° articulation
  • Safety factor of 5:1
  • Safety factor of 4:1
  • Control anti-crack on 100% of products
  • Fatigue test
  • Two ways of tightening
  • Individual traceability number
    • Use Coditracer to verify the authenticity of your Codipro lifting point or access user instructions, technical literature, angle load charts, the certificate of conformity, the inspection procedures or to guarantee your Codipro products.
  • Other variants available on request
  • Each ring is accompanied with use recommendations
  • Delivery with certificate of compliance
  • Certified ISO 9001
  • Certified ISO 14001
  • Tested according to standard EN 1677-1

Dimensions & Specifications - TSR Metric Thread

Reference Diameter SF 5:1 WLL (t) Standard L1 (mm) Torque (Nm) X (mm) S1 (mm) S2 (mm) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) H (mm) Weight (kg)
TSR M 8 M 8 (x1,25) 0,30 14 6 18 8 16 33 56 30 41 25 10 58 9,5 0,4
TSR M 10 M 10 (x1,50) 0,60 17 10 18 8 16 33 56 30 41 25 10 58 9,5 0,4
TSR M 12 M 12 (x1,75) 1,00 21 15 18 8 16 33 56 30 41 25 10 58 9,5 0,4
TSR M 14 M 14 (x2) 1,30 23 30 24 8 20 45 81 45 56 37 14 79 13,0 1,1
TSR M 16 M 16 (x2) 1,60 27 50 24 8 20 45 81 45 56 37 14 79 13,0 1,2
TSR M 18 M 18 (x2,5) 2,00 27 70 24 8 20 45 81 45 56 37 14 79 13,0 1,2
TSR M 20 M 20 (x2,5) 2,50 30 100 24 8 20 45 81 45 56 37 14 79 13,0 1,2
TSR M 22 M 22 (x2,5) 3,00 33 120 45 14 24 62 105 60 80 45 20 106 19,0 2,8
TSR M 24 M 24 (x3) 4,00 36 160 45 14 24 62 105 60 80 45 20 106 19,0 2,9
TSR M 27 M 27 (x3) 5,00 36 200 45 14 24 62 105 60 80 45 20 106 19,0 2,9
TSR M 30 M 30 (x3,5) 6,30 45 250 45 14 24 62 105 60 80 45 20 106 19,0 3,0
TSR M 36 M 36 (x4) 10,00 54 320 54 19 30 81 140 80 111 71 30 148 26,5 7,6
TSR M 42 M 42 (x4,5) 12,50 63 400 58 19 30 84 146 80 111 71 30 148 26,5 7,8
                                 
Reference Diameter SF 4:1 WLL (t) Standard L1 (mm) Torque (Nm) X (mm) S1 (mm) S2 (mm) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) H (mm) Weight (kg)
TSR M 48 M 48 (x5) 20,00 68 600 69 19 30 100 178 110 135 90 42 180 33,0 17,5
TSR M 56 M 56 (x5,5) 22,00 78 600 73 19 30 104 184 110 135 90 42 190 33,0 18,0

Dimensions & Specifications - TSR UNC Threads

Reference Diameter SF 5:1 WLL (t) Standard L1 (mm) Torque (Nm) X (mm) S1 (mm) S2 (mm) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) H (mm) Weight (kg)
TSR U 516 UNC 5/16"-18 650 15 7 18 8 16 33 56 30 41 25 10 58 9,5 0,4
TSR U 038 UNC 3/8"-16 1200 17 8 18 8 16 33 56 30 41 25 10 58 9,5 0,4
TSR U 050 UNC 1/2"-13 2200 21 12 18 8 16 33 56 30 41 25 10 58 9,5 0,4
TSR U 058 UNC 5/8"-11 3800 27 40 24 8 20 45 81 45 56 37 14 79 13,0 1,1
TSR U 075 UNC 3/4"-10 5500 30 80 24 8 20 45 81 45 56 37 14 79 13,0 1,2
TSR U 078 UNC 7/8"-9 6600 33 90 41 14 24 62 84 60 80 45 20 106 19,0 2,7
TSR U 100 UNC 1"-8 10,000 36 125 41 14 24 62 84 60 80 45 20 106 19,0 2,8
TSR U 125 UNC 1" 1/4-7 14,000 46 200 41 14 24 84 146 80 111 71 30 106 26,5 7,1
TSR U 150 UNC 1" 1/2-6 20,000 61 240 54 19 30 84 146 80 111 71 30 148 26,5 7,7
                                 
Reference Diameter SF 4:1 WLL (t) Standard L1 (mm) Torque (Nm) X x X S1 (mm) S2 (mm) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) H (mm) Weight (kg)
TSR U 200 UNC 2" 4,5 50,000 76 450 66 19 30 104 184 110 135 90 42 190 33,0 17,7
Codipro TSR Dimensions
Pricing

+

Products of Possible Interest

RUD starpoint eye bolts with option of metric, metric fine (M6-M64) or UNC (1/4"-2" UNC) threads.
RUD "VRS" & "VRS-F" Starpoint Rotating Eye Bolt
180° articulating bolt-down shackle lifting point, designed for linear lifting. 20 to 55 tonne.
Codipro "CSS" Central Safety Shackle
Stainless steel male quick attachment bolt-on double articulated swivel load rings (hoist ring) with lifting eye. Metric (M8-M24) or imperial (1/2"-1") thread, 250kg to 2.5 tonne.
Codipro "SS.QL.DSR" Stainless Steel Quick Lift Double Swivel Lifting Ring
Metric thread swivel lifting point with capacity options from 500kg to 2.5 tonne and thread sizes from M12 to M24
RUD "INOX-STAR" Stainless Steel Swivel Eye Bolt
Crosby trench cover swivel lifting points with imperial thread (1" to 1-1/2"). 2270kg to 6820kg (5000-15000 lbs).
Crosby 'HR500' Trench Cover Hoist Ring
Male bolt-on double articulated swivel load rings (hoist ring) with eye. Metric (M24-M100) or imperial (1"-2") thread. 4.5 to 32.1 tonne.
Codipro "DSS" Double Swivel Shackle Lifting Point
Contact Us About This Product

LiftingSafety uses cookies to improve your user experience,
To accept this, please click the 'accept' button below.

Find out more