Tiger TRLH General Industrial Use Lever Hoist

• Rugged steel body construction
• Lightweight and portable
• 360 degree lever rotation
• Short stroke and low lever pulling effort
• Easy single-hand “freewheeling” operation
• Drop forged & heat treated alloy hooks
• High quality alloy calibrated load chain
• Safe reliable twin pawl mechanical brake
• Guaranteed light load protection

• Heat treated alloy steel triple spur gears and pinion shaft
• Heavy duty chain end stop
• Operating temperature of -40°C to +50°C
• Proof tested to 1.5 times rated capacity
• 1.5m height of lift as standard but can be chained to exact requirements
• Individual spares readily available
• Can be supplied with various top and bottom fitting such as self-locking hooks, clevis shackles or reevable egg links.

Hooks

Drop forged and heat treated alloy hooks are furnished with heavy duty latch kits that fully engage into the nose of the hook offering maximum load security. The swivel hooks are attached to the yoke using high grade nuts & bolts allowing for complete inspection during any statutory inspection or written scheme maintenance. Recessed forgings offer full protection to the load chain anchor bolts on all our bottom hooks.

Safety Brake

The highly efficient twin pawl brake, works instantly when the operation is stopped and securely holds the load. Designed and 100% tested to hold a 2% load of the rated capacity. The bonded friction discs are free of asbestos and achieve highly efficient braking.

Grease

High performance premium quality grease allows the TLH11 hoists to be certified for use within a temperature range of -50°C to +50°C far exceeding the requirements of current standards.

Load Chains

Tiger only use the highest quality alloy, calibrated load chains in Grade 80 (T) or 100 (V).

Chain end stops

User friendly heavy duty end stops make it easy for the operator to position the chain whilst “freewheeling” but most importantly gives complete compliance to all known standards.

Mechanical Efficiency

All major components are heat treated and precisely machined to ensure long term smooth operation. High gear ratios keep physical effort to a minimum.

Finish

The TLH11 hoist is finished in a high quality powder coat paint offering excellent corrosion protection.

Proof Load Tests

Every lever hoist is fully tested to 1.5 times its rated capacity.