Tractel "Dynarope HF36" Tension Meters - WLL Range from 500 daN to 40,000daN and For use with 20 to 44mm wire rope

The dynarope™ tension meter is a precision device for measuring forces in a tensioned cable or rope.

The meter can be attached directly to the cable. When the tension meter is placed on a tensioned cable, the load cell will generate a signal which is proportional to the force.

Applications: antenna wires, suspension bridges, electronics, sailing ships, etc.

There is a large variety of cables, each cable having its own characteristics such as composition, diameter, rigidity, density, etc. The database includes several basic wire rope data. We are happy to help you choose the right model and parameter settings in our wire rope database. The HF36 series have a standard USB link for managing and storing measurement results on a PC. Can also be used as stand-alone.

HF36 kit includes

Plastic case, measuring sensor, handheld display + LPT cable, USB cable, batteries and software loader light

•  Can be placed directly on cable or rope
• Stand-alone or PC connection (HF36)
• Extensive wire rope database
• IP 65
• Storing measurement results
• Customized setting
• Accuracy: <1 to 5% full scale

Tension Meter Key

A	Crank	G	Sheaves
B	Bronze Nut	H	Support of the Sheaves
C	Tightening Screw	I	Strain Gauges
D	Crank Support	J	LEMO Plug
E	Jaw	K	Rotary Stop Block
F	Axle of the Sheave	L	LEMO Cable

LEMO connector is a « push-pull » connector.

The LEMO self-latching system allows the connector to be mated or unmated by simply pushing or pulling axially on the outer release sleeve.

Any rotation of the plug while in the socket will damage the connector and hence the connection between the sensor and the display.

Remote Display Key

A	Display	E	Battery Cover Fixing Screws
B	Keyboard	F	Batteries (AA1.5V (3))
C	USB Plug (option)	G	Gasket
D	LEMO Plug*	H	Battery Cover

LEMO connector is a « push-pull » connector.

The LEMO self-latching system allows the connector to be mated or unmated by simply pushing or pulling axially on the outer release sleeve.

Any rotation of the plug while in the socket will damage the connector and hence the connection between the sensor and the display.

Display information and keyboard functions

A	Battery level indication	B	Current temperature
C	GPS Status	D	Current unit
E	Position of the rotary stop block	F	Current measure
G	Graphic visualization of the measure between maximum and minimum	H	· Press 3 sec = increase police of the current measure · Auto-off: keeps the device on In MENU Mode · Press = scroll up
I	· Press = access to wire rope data bank · Press 3 sec = access to historical In MENU Mode · Press = Select	J	· Press 3 sec = Backlight on or off · Press = data log In MENU Mode · Press = scroll down
K	· Press = ON · Press 3 sec = OFF When ON · Press = access to MENU In MENU Mode · Press = Enter	L	· Press = average mode on · Press 3 sec = monitor mode on · Press 3 sec = current mode off In MENU Mode · Press = Escape
M	Information about the type of tension meter