Tractel

Tractel "T500" Tirfor Cable Puller

Tirfor heavy-duty galvanised steel body cable/wire rope hoisting/lifting machine for lifting and pulling. 800kg to 3200kg (lifting capacity)

Model: Tractel T500 Series / TTCP-185

Tirfor T500 Series Manual Cable Pullers offer three options, very similar to the Tractel TU range of cable pulling and lifting machines. These are the genuine Tirfor machines for all lifting and pulling applications.  A telescopic operating handle is included in the price and a length of wire rope is supplied to suit your application. These are the best made pulling/positioning machine used in mechanical engineering, forestry, construction, mining and many other industries.

Available in 800kg, 1600kg and 3200kg capacities.

Tractel "TU" Tirfor Cable Puller

Top of the range heavy-duty Tirfor (wire rope hoist / winch) with aluminium body for lifting and pulling. 800kg to 3200kg.

Model: Tractel TU Series / TTCP-188

The genuine Tirfor machine for all lifting and pulling applications, where only the best will do. All TU series Tirfors can be used with an unlimited length of wire rope. Operates by hand-over-hand principle. The two hands represent the 2 jaws of the machine. They grip the wire rope without damaging it, and alternately pull it forward during the operation and hold it during reverse operation. The effort is transferred to the jaws by two levers, one for forward operation and the other for reverse operation. The load is held securely at all times.

Available in 800kg, 1600kg and 3200kg capacities.

Tractel "Roof Truss" Fall Arrest Anchorage for Nailing to Timber Trusses

Roof Truss Anchoring Device.

Model: RTA-2199

Tractel Roof Truss Anchorage is made from steel, is designed to support wooden roof trusses. Complies to the standard CE EN 795 class A.

Tractel Adjustable Fall Arrest Beam Clamp Anchorage Point, Width Range 75mm - 235mm

Tractel Corso Beam Clamp Anchor with adjustable threaded bar, EN795 Class B

Model: LT-1B M / BCA-2200

This hitching clamp is equipped with an anchoring ring, with a compact and strong construction; this can also be quickly and easily adjusted with its removable handle. It's adjustable from 75mm to 235mm.

Tractel "Rollbeam" Fall Arrest Push Travel Trolley Anchorage Device. Quick Fit & Adjustable Width from 58 to 220mm or 220 to 300mm

Push travel man-riding / fall arrest / rescue beam trolley mobile anchor point.

Model: RollBeam / PTA-2201

The rollbeam mobile anchorage device is used to create a permanent or semi-permanent anchorage fitted on an H-shaped bar. The trolley moves along the lower flange of the bar, fitted with a ring for attaching the block for retractable lifeline or a standard lifeline. Adjustable from 58mm to 220mm depending on the width of the flange.

Tractel "Door Bar" Fall Arrest & Restraint Anchorage Suitable for 2 Users

Door Bar Fall Arrest & Restraint Door Anchor Certified to EN795.

Model: Door Anchor / DBA-2202

Tractel 062217 Door Bar Fall Arrest & Restraint Anchorage is up to the standard of CE EN 795 class B. Suitable for use by up to 2 users. Spacing - 1100mm for 1 user. 800mm for 2 users. This is very fast and easy to setup. Must be used adjacent to the door opening.

Tractel "Dover Clamp" Fall Arrest Beam Anchorage Point. Fixes to the Flange of a Steel Column (Medium & Large) - Width 120mm - 640mm

Roll Clamp Dover Clamp Beam Anchor Point which Rolls along an R.S.J.

Model: Rollclamp / DCBA-2203

Aluminium Fall Arrest Eye Bolt or Fall Restraint Anchor Point, 150kg, Available in Several Colours

Corrosion resistant fall arrest eyebolts made from aluminium also known as a restraint eye bolt or a fall arrest anchor point. Conforms to EN795

Model: AEAP-2204

Tractel "Ballsafe" Removable Fall Arrest Eye Anchor Point Eye Bolt.

Tractel Removeable Eye Bolt. Conforms to EN795

Model: Tractel BallSafe anchor / REB-2205

The ballsafe anchor point is made up of a four block plug and a female socket. It is sealed into concrete or a material of equal density using a chemical compound. Complies with Standard EN 795 A and B. Perfect for use as ladder restraint eye bolts when a visible bolt is not allowed / required such as architectural and listed buildings. Available with eyebolt only or eyebolt (block plug) and female sockets.

Tractel "Tirsafe" Temporary Steel Wire Line Fall Arrest Horizontal Lifeline. Span Options 20 or 30 Metre

Fall Arrest Temporary Lifeline with Tirfor for Tensioning. Complies with EN795

Model: Tractel Tirsafe Temp / WTL-2207

The Tirsafe is an energy absorber for temporary horizontal lifeline systems (HLLs) for up to 3 workers. It is the first in the industry to incorporate a tension indicator that lets you know when your line is correctly tensioned. The deployment activation force and tension indicator aspects of the Tirsafe result from tension spring/housing resistance. This clever design indicates correct tension when the knurled ring appears in the indicator window.

Tractel "Travsafe Tempo 2" Webbing Temporary Horizontal Fall Arrest Lifeline c/w Anchorage Straps & Carry Bag. For 2 Users - Max Span 20m

Temporary Horizontal Lifeline for a Maximum of 2 People. Ratchet tensioning mechanism. Conforms to EN795

Model: Tractel Tempo 2 / WTL-2208

Tractel Travsafe Webbing Temporary Fall Arrest Lifeline can be used by two people, with synthetic fibre webbing straps that are adjustable from 0 to 18m. This Lightweight lifeline allows total freedom of horizontal movement. Easy and quick to install when there are two anchoring points offering sufficient resistance.

Tractel "Stopcable" Permanent Installation Vertical Wire Line Fall Arrest Lifeline For End User Installation

Stopcable Is a vertical fall arrest wire line Vertical Lifeline for fixing to ladders etc...

Model: Tractel Stopcable / TCL-2209

The purpose of the Stopcable system is to ensure the safety of personnel throughout their ascent. The Stopcable vertical lifeline is a mobile anchoring device to enable a person to move on a vertical axis in perfect safety and without having to disconnect themselves; it is made up of a fixed point and individual mobile equipment. Top and bottom anchor points Materials: Galvanised and stainless steel.

Tractel "Safety Manual Descender" Device - Rope Diameter 9 to 12mm

Double Safety Descent Device.

Model: SDD-2210

The TRACTEL double safety descender device has a hinged mechanism. It enables upwards and downwards movements on a 9~12 mm halyard. This descender device is equipped with an anti-panic safety mechanism (i.e. if the operator tensely grips the control handle of the apparatus, the descender device will block) and with a dead man’s handle (i.e. if the operator releases the control handle, the apparatus
will stop).

Tractel "Rope Protector" for Corner protection to Prevent Abrasion Damage to the Rope.

Edge protection for climbing ropes / rescue ropes from sharp or abrasive surfaces.

Model: TRP-2211

Tractel Rope Protector is an edge protection for climbing ropes or rescue ropes from sharp or abrasive surfaces, preventing fraying or cutting of the rope. Made from lightweight aluminium.

Tractel "Evak 500" Synthetic Rope Manual Operation Rescue Winch - Unlimited Rope Length

Tractel Evak 500 Rope Winch with Unlimited Length of Rope.

Model: Evak 500 / MRW-2212

Specifically designed for ease of handling, operation and transport, the unit is particularly compact and extremely lightweight (6 kg). Its overall size is greatly reduced by incorporating a folding operating handle. Even long lengths of textile rope are easy to handle and store, weighing up to two and a half times less than wire rope. The EVAK 500 has been designed to be used exclusively by professionals who have been fully trained in safety and rescue procedures

Tractel "Subito" Manual Operation Temporary Use Suspended Working Seat With Fall Arrest options. Max 30m Working Height.

Tractel Subito.

Model: TS-2214

The SCAFOR manual hoist has a single wire rope and together with the retractable lifeline (AC04/20) provides a secure and reliable access system, essential for man-riding equipment. Both handles are used for lifting whilst lowering only requires operation of one handle. Designed for working at heights of up to 20 metre. Equipped with a SCAFOR manual winch, this harness is then approved for lifting people. With its safe, easy, and efficient operation, the SUBITO boatswain suspension harness was specially designed for inspection, Maintenance and cleaning.

Tractel "Roof Anchor" Fall Arrest Anchor Point for Timber Roof Trusses

Roof Anchor designed to be directly secured to the wood beams of a roof framework.

Model: Anchor - ringflex / RAP-2215

Roof anchors are designed to be directly secured to the wood beams of a roof framework. Anchor shapes (straight, arched or spiral) are designed to match with the type of roofing used. Available in different models: flat anchor, bowed anchor and twisted anchor. Each are available in galvanised or stainless steel with fastening pins and annular rings.

Tractel "Travsafe" Twin Wire Permanent Horizontal Fall Arrest Lifeline System. Designed and Installed to Suit Customers Specification

Twin Wire Fall Arrest Horizontal Lifeline System.

Model: Travsafe / TWLS-2230

Tractel Travsafe Twin Wire Horizontal Fall Arrest Lifeline System gives freedom to move while working at height and can be used for either fall arrest or restraint ensuring safety whilst traversing horizontally over any given distance. The twin wires allow for a much greater factor of safety and applied loading than traditional single wire systems.

Tractel "Tractelift" Electric Climbing Assistant. Balances the Climbers Weight and Provides Fall protection.

Powered Climbing Aid for vertical ladders, Saves climber’s strength and Reduces climbing time.

Model: PCA-2636

The Powered Climbing Aid improves the operational safety by causing less stress on the arms and legs, which keeps the heartbeat closer to rest level, the need to rest is decreased. Therefore the danger of incidents due to exhaustion is efficiently reduced. So that, all in all, these benefits essentially improve the operational safety.

Tractel "TU-P" Man-riding Tirfor Cable Puller

Manual wire rope/cable hoist for lifting people/persons/personnel or access platforms. 600kg, 1200kg or 2400kg lifting capacity.

Model: Tractel TU-P Series / MT-2708

Tractel Manriding Tirfor cable hoist certified for lifting people. This range of man-riding certified Tirfors are available in three different sizes, 600kg, 1200kg and 2400kg capacity. The capacity selected will be to suit the lifting platform in which they are to be used and the number of people/tools and equipment to be lifted. These 'Man-riding' lifting machines must be used with a secondary safety device such as the Blockstop fall arrest device to be fitted to a separate/independent rope; thus providing a fall arrest plan. Consideration must also be made to have a rescue plan in place.

Tractel Blocmat Load Arrestors - Range from 250kg to 1000kg (16 options)

Tractel Blocmat Load Arrestors from 8m to 25m.

Model: Tractel Blocmat / LA-2771

LiftingSafety Letcart Load Arrestor - Range from 250kg to 1000kg (16 Options)

Load Arrestors from 8m to 25m.

Model: Letcart LA / LA-2803

Letcart 250 - 10m or 15m wire rope length. 20 metres a min max speed
Letcart S - 500kg, 800kg, 1000kg SWL. 15m, 20m, 25m wire rope length. 18 metres a min arrest speed
Letcart SI - 500kg, 800kg, 1000kg SWL. 15m, 25m wire rope length. 18 metres a min arrest speed.

Tractel "Jockey J3/J5" Tirfor Cable Puller

Jockey winches are portable manual wire rope hoists for lifting and pulling applications. 300kg or 500kg (lifting capacity).

Model: Tractel Jockey J Series / TJ-3253

They are light-weight and easy to carry. The winch can be installed quickly and is therefore suitable for occasional use; it is operated by a lever. Option: the load capacity of the device can be increased with sheave blocks.

Available in 300kg or 500kg capacities.

Tractel "TU16P" Pneumatic Tirfor, Compressed Air Operation Lifting and Pulling Machine with Infinite Height of Lift- 1600kg

Pneumatic pulling machine weighs only 40 kg. Infinite HOL (rope length)

Model: TIRFOR TU16P / TTU-3254

The Tirfor® Principle - A Tirfor® has neither wheels nor gears. Two jaws alternately pull the wire rope and the load in the required direction, just like pulling on a rope with both hands. The jaws are self clamping, proving immediate and gradual safety. The heavier the load , the tighter they clamp. A release mechanism allows the wire rope to be inserted between the jaws.

Features: Constant control of the load during lifting and lowering with accuracy to within one millimetre, when stationary the load is automatically distributed between the two jaw units, overload safety device, TU range approved for lifting personnel in most countries.

Tractel "TU32P" Pneumatic Tirfor, Compressed Air Lifting and Pulling Machine with Infinite Height Of Lift - 3200kg

Infinite wire rope length (HOL)

Model: TIRFOR TU32P / TT-3255

The powered models of the TIRFOR machines complement the manual units for heavy loads, such as operating large work platforms, lifting shuttering, moving machinery, etc. Depending on the application, the working conditions and the power available, powered operation can be electro-hydraulic or pneumatic.

Key Benefits: Saves time and labour, no operator fatigue, continuous operation, increased safety.

Tractel "TU32H" Hydraulic Tirfor (Supertirfor), Wire Rope Lifting & Pulling Winch - 3200kg

Optional Hydraulic power pack with electric or petrol motor.

Model: TU32H / TT-3257

The powered models of the TIRFOR machines complement the manual units for heavy loads, such as operating large work platforms, lifting shuttering, moving machinery, etc.
Depending on the application, the working conditions and the power available, powered operation can be electro-hydraulic or pneumatic.
Key Benefits: Saves time and labour; No operator fatique; Continuous operation; Increaded safety; One powerpack can power 4 Tirfor units all pulling/lifting the same load.

Tractel "Tirak" Wire Rope Lifting Hoists. 230v and 400v Options - Range from 300kg to 3000kg (non man-riding version)

Tractel Tirak electric hoist for material lifting applications, multiple configurations and infinite height of lift.

Model: Tirak X Series / TX-3259

Tirak X Series has an unlimited height of lift because the wire rope is not stored in the machine, centrifugal brake for controlled descent in case of power failure and pendant control with up/down and emergency stop.

Lighter than the T-series, the X-series are most suited for bosun's chairs, inspection harnesses, one-man cradles and light suspended platforms.

Tractel Tirak Mobile Lifting Hoist In Heavy Duty Frame with Cable Reeling Drum - Range from 300kg to 3000kg

Tirak Mobile electric winch / hoist for materials. 230v, 110v and 400v Options.

Model: Tractel Tirak Mobile / TTM-3262

The TIRAK with its compact frame is lighter, smaller and more economic than a crane or a drum winch with the same capacity and complete with a similar length of wire rope.  Features include: Terminal switch for limiting the height of lift wherever desired, emergency lowering in power failure at a controlled speed, electrical system suitable for use on building sites, easy to operate push button pendant control and heavier loads can be handled using winch with snatch blocks. Full safety features including limit switches and release/lower facility.

Tractel "Minifor TR" Electric Wire Rope Lifting Hoist. 230v, 110v and 400v Options - Range from 100kg to 500kg

A comprehensive range of universal, high performance portable electric hoists, for work at any height.

Model: Tractel Minifor TR / M-3266

Features include: Unlimited length of hoist cable adapted to the requirement, WLL 100 kg to 950 kg, integral handle for easy carrying,
suitable for building sites, fast setup, unloaded wire rope freely suspended or optional rope reeler, pendant control or radio operation,
direct lift or sheaving kit for increased capacity and a single phase or 3 phase motor.

Tractel TR Minifor Lifting Hoist with Spring Loaded Cable Reeler. 230v, 110v and 400v Options - Range from 100kg - 950kg

Universal, high performance portable electric hoists with spring loaded reeler, for work at any height.

Model: Minifor with Reeler / M-3270

Features include: Unlimited length of hoist cable adapted to the requirement, spring loaded reeler, WLL 100 kg to 950 kg, light, easy to handle aluminium alloy design, integral handle for easy carrying, suitable for building sites, fast setup, efficient operation with swivelling suspension hook, extremely good weight/power ratio, reduced maintenance and pendant control or radio operation.

Tractel "EH" Single Side Opening SnatchBlock, Capacities of 1000kg to 8000kg

New product from Tractel, EH Single side opening blocks - 1 Sheave, SWL upto 8000kg (8 tonnes).

Model: EH Single / TE-3273

The EH’s range can be used with standard tirfor® and tirak® wire rope cable. The single sheave snatch blocks of the EH’s range are mainly used for temporary applications for pulling and lifting, when quick assemblies and/or dismantlings are required. They can be suspended to a fixed or mobile anchorage point with the right strength corresponding to the required load.

Tractel EH Single Side Opening Block are available in the following sizes - 1t/wire rope size 8/9mm, 1.6t/wire rope size 7.5/8.3mm 2t/wire rope size 10/12mm, 3.2t/wire rope size 13/15mm, 3.2/wire rope size 10/11.5mm, 5t/wire rope size 13/15mm, 5t/wire rope size 16/18mm, 6.4t/wire rope size 14/16.3mm, 8t/wire rope size 21/23mm

Tractel "EC" Swing Cheek Scissor Type Pulley - Range from 1600kg to 8000kg

Snatch pulley "scissor type" for use with wire rope.

Model: TE-3274

The swing blocks of EC type are mainly used for temporary applications for lifting or pulling. They can be su spended to a fixed or mobile anchorage point with the right strength corresponding to the required load. Thanks to an easy instalment and a light weight, this is the most current block used for repairing operations. These swing blocks are most often used as winch accessory on 4WD cars.

Tractel EC Snatch Pulley Scissor Type are available in the following sizes - 1.6t, 3.2t, 5t, 8t.

Tractel "ES" Simple Yoke Non-opening Pulley Wheel - Range from 320kg - 1200kg

Sealed pulley.

Model: TE-3275

Tractel "ETA", "ETC" & "ETM" Pulley Sheave Snatch Blocks for Wire Rope Heavy Duty Off-Shore - Range from 2000kg to 32000kg

Heavy duty snatch block for off-shore purposes with stud shackle, hook or axle fixing.

Model: TE-3277

Tractel CAROL TR Manual Geared Winches - Range from 300kg to 2000kg

Manual drum winches series TR (manual geared).

Model: Tractel CAROL TR / TC-3281

Manual geared winches may be used for lifting or pulling a load and are available in two versions: one model with spur gearing and one with worm gearing. The cable is wound onto the drum by turning the crank. There is an automatic ratchet brake with stainless steel spring on both series and it's weather resistant with highly robust chassis and treated mechanical parts. There's also a safety device to prevent release of the machine when under load. Adjustable handle length.

Tractel "Blocstop BSA" Fall Arrest Device. Automatically Stops a falling Load. range from 800kg to 2400kg

The Tractel BLOCSTOP is designed specifically for suspended platforms to automatically arrest a fall though has many other possible applications.

Model: TBFA-3287

As well as being sound safety management, regulations require you to ensure your equipment for lining personnel or loads is safe. BLOCSTOP safety systems meet the most exacting safety requirements and can be easily adapted to numerous types of applications. Available with different capacities 800kg, 1000kg, 1200kg and 2400kg.

Tractel "Bravo" Lightweight Lever Hoist

Tractel Bravo hand operation lever chain hoist for lifting, pulling and tensioning. Optional overload limiter. 250kg to 9 tonne.

Model: Bravo / TB-3289

Lightweight and portable with simple controls.

Bravo models, available from 1/4 to 6 tons, are suitable for a wide variety of lifting, pulling and tensioning applications: for lifting and lowering loads in manufacturing and assembly operations, removing engines, rigging and moving loads, applying tension to conveyor belts and a wide range of other applications. Available in sizes 500kg, 750kg, 1500kg, 3000kg, 6000kg.

Tractel "Tralift" Manual Chain Hoist

High quality lightweight reliable and low maintenance manual chain block and tackle. 250kg to 20 tonne.

Model: TRALIFT / TT-3290

Tralift Manual Chain Hoist from Tractel has a Hook suspension with 360° swivel, Tested to 150% of WLL, Automatic brake with double pawl system.

Self-lubricating chain, corrosion resistant, made to standard NFE 26-010 (resists marine mists >800 h. and temperatures to 280° C). Optional load limiter.

Available in sizes 250kg, 500kg, 1000kg, 1500kg, 2000kg, 3000kg, 5000kg, 10,000kg and 20,000kg.

Tractel CORSO Overhead Travelling Trolleys - Range from 250kg to 20,000kg

A safe and quick anchor point - A simple and reliable system.

Model: TC-3291

Tractel BX Kerbstones Clamps - Range 100kg to 200kg

Kerb stone lifting, handling and transportation clamps. For manual lifting of kerb stones. Chain sling option also available for mechanical lifting.

Model: Tractel BX kerbstone clamps / TB-3293

The Tractel BX is an handling accessory to transport and lay concrete kerbstones manually or using a 2 legged sling. A model with handlebars is available to ensure better stability when manually transporting kerbstones.

Tractel Kerbstone clamps are available in the following sizes - 120kg/opening 1000mm, 100kg/opening 1000mm, 120kg/opening 915mm.

Tractel TOPAL "CC" Container Lugs Lifting System

Container lugs for lifting of containers by their standard ISO corners.

Model: Tractel TOPAL CC / TTC-3294

Tractel TOPAL CR C-Hook for Lifting and Turning Coils - Range from 500kg to 2000kg

Tractel CR C-shaped lifting hook for coils

Model: Tractel TOPAL CR / TT-3296

The Tractel TOPAL CR are designed for the lifting of coils and/or turning over from the horizontal to the vertical position and vice versa.

Tractel TOPAL GP Beam Clamp - Range from 1000kg to 10,000kg

Beam Clamp with clamping and locking screw, can also be used to lift girders when used in pairs.

Model: TTG-3299

Tractel TOPAL HF Drum Clamp - 500kg Capacity

Semi-automatic drum clamp for horizontal steel drum lifting.

Model: Tractel TOPAL HF / TT-3300

Accessory equipped with an automatic locking system allowing the drums laying down without any manual intervention. Clamping is proportional to the load, thus minimising the damage risk to the drum.

Tractel topal drum clamp - 500kg/opening 400 - 920mm.

Tractel TOPAL KP Semi-Automatic Clamp for Lifting Girders - 1500kg or 3000kg

Lifting clamp for beam profiles

Model: Tractel TOPAL KP / TTKP-3301

This clamp is fitted with a safety spring mechanism allowing permanent contact of the cam on the load to be lifted, even when it is being laid down. This model is also equipped with automatic grasping ensuring the clamp closes when the plate or profile is positioned at the back of the clamp’s throat. The locking lever does not stick out to ensure that it cannot be damaged. The corrugated cam only marks one side of the load.

Tractel TOPAL KS Multi-Position Plate Clamp - Range from 750kg to 3000kg

Clamp opening of 0-15mm to 0-30mm.

Model: Tractel TOPAL KS / TTK-3302

Tractel TOPAL LT Lever for separating plates

Telescopic 'knock in' bar with wedge at the end for separating plates in a bundle

Model: Tractel TOPAL LT / TTL-3303

Tractel TOPAL NK Multi-position Self-locking Plate Clamps - Range from 1500kg to 7500kg

Automatic lifting clamp

Model: Tractel TOPAL NK / TTN-3304

The clamps are fitted with a safety spring mechanism for a permanent contact of the cam onto the piece to be lifted, even when it's being put down. This has an automatic grasping system, ensuring the clamp locks when the plate is correctly positioned. The locking lever does not stick out so the clamp may be used on the bare ground. The corrugated cam only marks one side of the load.

Tractel TOPAL NX / NXR Multiposition Self-locking Plate Clamp for Very Hard or Sensitive Loads - Range from 500kg to 1500kg

Automatic lifting clamp

Model: TOPAL NX / NXR / TTN-3305

This is a clamp for lifting in all positions without marking the surface of smooth or polished pieces of stainless steel, aluminium, laminated wood, concrete, plastic, glass plates and welded plate assemblies. This clamp is fitted with an automatic gripping mechanism: the locking handle is designed to fit the clamp over the edge of the object to be moved and the automatic locking on the trigger grips the piece to be lifted.

Tractel TOPAL PB Clamp for Lifting Loads with Parallel Sides - 500kg or 3000kg

Topal PB scissor action lifting clamp with jaw opening ranges from 0 to 1000mm (various options) for lifting products with parallel sides.

Model: Tractel TOPAL PB / TTP-3308

This grab can be used for vertical lifting, without marking, all products with parallel sides made of various materials: concrete, steel, plastic, wood, marble, etc. These accessories are fitted with an automatic lower lock which allows the load to lay down without any manual intervention. Rubber coated pads ensure a great adherence and avoid load marking. Transport handles make the positioning easier. Clamping is proportional to the load, thus limiting the damage risk.

Tractel TOPAL PC Automatic Safety Fork Lift Truck Attachment. 1500 or 3000kg Capacity

Safe working loads of 1500kg or 3000kg shackle and hook not included.

Model: Tractel TOPAL PC / TTP-3309

PC Swivel Hook Forklift Truck Attachment from Topal Industries.

• Provides an hanging point on fork lift trucks to handle loads.

• These accessories are fitted with an immobilizing system on the fork lift truck tines ensuring that lifting operations are performed safely.

Tractel TOPAL PL Girder Clamp - Range from 1000kg to 4000kg

PL lifting clamp for beam profiles to horizontally lift

Model: TOPAL PL / TTP-3310

Tractel TOPAL PP Adjustable Clamp for Lifting Loads with Parallel Sides - 1000kg

TOPAL adjustable block clamp.

Model: TTP-3311

This is designed for lifting without marking of products with parallel sides made of various materials such as wood, concrete, steel, plastic and rock. These accessories are fitted with an open position locking system allowing the positioning of the load. Rubber coated pads ensure a great adherence and avoid load marking. Clamping is proportional to the load, thus minimising the damage risk.

Tractel TOPAL PP adjustable clamp - 1000kg/jaw opening 200 - 1000mm.

Tractel TOPAL PR Rail Clamp - 1000kg or 2000kg

Lifting clamp of rail profile

Model: TTP-3312

Tractel TOPAL QS / QR / QX Hooks (Lifting Dogs) for Horizontal Plates - Range from 1500kg to 10,000kg

Simple (QS) or double (QR/ QX) hooks for lifting horizontal plates individually or in bundles. QX : also enable the separation of horizontal piled plates. Must be used in pairs, but sold individually.

Model: TOPAL QR / TTQ-3313

QS: use in 4s with lifting beam and 2-legged slings.
QR: use in pairs and 1 4-legged sling.
QX: use in pairs and 1 2-legged sling.

Tractel TOPAL RB Manhole Hook for Use in Pairs or Sets of Three - Range from 500kg to 1500kg

TOPAL industries manhole hooks.

Model: TTR-3314

The Tractel TOPAL Manhole Hooks are used for lifting vertical wells of round, square or rectangular concrete. The hooks have a grooved surface that ensures perfect grip on the materials in case of shock whilst moving the load.

Their use does not require any adjustment and the positioning is easier thanks to ergonomic handles.

Tractel TOPAL RT Round Bar and Pipe Clamps - Range from 500kg to 3000kg

Pipe and bar clamps for the lifting of round bars, tubes, square and small sections in bundles or individually.

Model: TOPAL RT / TTR-3315

The Tractel TOPAL RT is used for the lifting of rods, tubes, profiles and various small squares in circles or bundles. Once it's locked in the open position this allows you to deposit the load without any action on the caliper. These accessories are fitted with an open position locking system allowing to lay down the load without any intervention on the clamp.

Tractel "SCX" & "CX" TOPAL Lifting Beams for Cone-shaped Concrete Manhole, WLL1000kg

Beam for lifting and laying conical pipe sections, Topal SCX, Topal CX.

Model: TOPAL SCX/CX / TTS-3316

The CX ensures contact at two points of loading. The SCX is more robust for intensive use and ensures 3 point loading. These accessories are fitted with polyurethane coated pads which enable the handling of cone shaped manholes without marking. Delivery includes a chain sling (CX1 model).

Tractel TOPAL TB Pipe Hooks for use in Pairs - Range from 500kg to 1500kg

Lifting of horizontal tubes of various materials using a 2-arm sling.

Model: TOPAL TB / TTT-3317

The Tractel TOPAL TB are hooks for use in pairs to lift pipes with a large opening, fitted with long handles for easy handling. Working in pairs with a 2-arm sling the load is lifted in a horizontal position.

Tractel TOPAL 'TC' Automatic Load Positioner for Single Rope - Range from 2000kg to 5000kg

Automatic load positioner for single wire rope

Model: TOPAL TC / TTT-3318

When lifting, the rope sling locks itself around the ring thanks to a round turn and the polyurethane coated pads will engage and grip the inner wall.

Tractel TOPAL TI Clamp for Horizontal Lifting and/or Laying in Trenches of Pipes - Range 500kg to 1000kg

Horizontal Clamp with opening of upto 900mm.

Model: TOPAL TI / TTT-3319

This is an accessory to transport horizontal pipes and lay them into trenches. Also designed to transport bars and tubes of any material.

S = semi-automatic laying down - Semi-automatic model: manual grab action and automatic locking of the grab in the open position.
A = automatic clamping + laying down - Automatic model: the grab and laying down operation is performed without any manual operation from the operator on the grab.

Tractel TOPAL TO Universal drum cable hook 13000kg pair.

Universal lifting hook for cable reels for use in pairs, each hook has a WLL of 6500kg.

Model: Tractel TOPAL TO / TTT-3321

These hooks are designed to be used in pairs with shackles and 2-legged sling(rope, chain or strap). These accessories are adapted to many cable drums. They fit holes with diameters from 55 to 83 mm. Slings and shackles not provided.

Tractel TOPAL VDL Clamps for Lifting Steel Drums With Rim/Flange - 1000kg Capacity

For Lifting drums in the vertical or horizontal plane

Model: TTV-3322

The Tractel TOPAL VDL Clamp is a handling accessory to lift open or closed vertical metal drums with edges (Standard drums with edge on each face).

Tractel TOPAL VFA Grabs for lifting standard metal drums in vertical position - 300kg Capacity

Fully automatic clamps for vertical steel drum lifting.

Model: Tractel TOPAL VFA / TTV-3323

These grabs are for lifting standard metal drums in vertical position (capacity 225 litres).Clamping is proportional to the load, thus minimising drum’s deformation risk.

Rubber coated pads ensure a great adherence and avoid marking the drums

Tractel TOPAL VFB Drums Clamp for Lifting and Revolving - 300kg Capacity

Grabs for lifting and turning standard metal drums.

Model: Tractel TOPAL VFB / TTV-3324

Grabs for lifting and turning standard metal drums (capacity 225 litres). The drum can be gripped vertically or horizontally. An indexing enables it to be held in position in both cases.

VFB 03 S - This model is fitted with an open position locking system to set down the drum without having to operate the grab.

VFB 03 A - This model is fitted with an automatic device to grip and set down the drum without having to operate the grab.

VFB 03 AR - This model is also fitted with a reduction gear to gradually empty the drum without effort.

Tractel TOPAL VLF - 500kg or 800kg Capacities

Handling accessory to lift metal drums with edges, diameter 600 mm, open or closed in the vertical position. This model is fitted with a safety locking device via the operating handle.

Model: TOPAL VLF / TTV-3325

The VLF is equipped with a system of rim pinching. The handle makes the clamp's positioning and locking onto the drum is easier. Clamping is proportional to the load, thus minimising the damage risk.

Price is per clamp and does not include the chain sling.

LiftingSafety 2 Point "Adjustable" Lifting Beams. Central Fixed Top Ring & Adjustable Suspension Eyes to Underside - Range from 1000kg to 6000kg

Adjustable Lifting Beam with single central top lifting eye.

Model: TTP-3329

Adjustable lifting beam.

• Single beam spreader.
• WLL from 1000 kg to 6000 kg.
• Useful lengths of 1000 mm to 5000 mm.

Lifting Beam kits, fixed and Adjustable Load Centres up to 5000kg Capacity.

In order to minimise freight cost, you may order kits of components and have the beam manufactured locally.

Model: TT-3334

Topal "PAL BEAM / PAL TURN" For Turning / Rotating of Loads. One or Two Rotating Belt Options - Range to 20000kg

Multiple applications for turning of loads (load turner).

Model: TTPB-3335

The Pal-Turn system consists of a tube rotated by a gear driven motor. Pulleys, protected by castings, are mounted at both ends, which rotate the straps and in turn rotate the load. A control button box enables the exact position of the load to be easily achieved. Available in safe working loads ranging from 100kg to 20,000kg.

Tractel HYDROFOR Hydraulic Toe Jacks - Range from 5000kg to 25,000kg

With a fully 360° turning body and a 180° turning operation handle

Model: Hydrofor / TH-3337

Available in capacities of: 5 Tonne, 10 Tonne and 25 Tonne.

Tractel TOP Toe Jack BT - Range from 1500kg to 10000kg

Floor handling of heavy loads up to 390 mm lift. Robust and maintenance free, this type of jack is fully adapted to be used on worksite.

Model: TT-3338

Tractel BT top toe jack.

• Robust construction.
• Working Load Limit applied on head and toe (except for models 16 and 20t).
• The folding handle of the crank reduces the overall dimension of the jack during transport.
• The gear wheels, the pinions and the rack are made of heat treated steel.

Tractel HT10 Standard Use Fall Arrest Harness with Rear 'D' Ring

General use safety harness to EN361.

Model: HT 10 / H1-3411

Tractel HT11 Standard Use Fall Arrest Harness With Sub-pelvic Strap, Rear 'D' Ring Connector

Complies with EN 361 standard available in 3 sizes S, M, XL to EN361.

Model: HT 11 / H1-3412

Tractel "HT22" 2 Point Fall Arrest Harness With Front and Rear 'D' Rings - Standard Buckles

Tractel harness with chest and back anchor point to EN361.

Model: HT 22 / H2-3419

Tractel HT45 VertyTrac (Standard Buckles) Fall Arrest Harness With Front and Rear 'D' Rings

Multi purpose harness ideal for use within the industrial maintenance sectors to EN361.

Model: TH4-3541

Tractel HT46 VertyTrac (Standard Buckles) Fall Arrest Harness With Front and Rear 'D' Rings and 2 x Chest 'D' Rings

Multi purpose harness ideal for use within the industrial maintenance sectors to EN361.

Model: Tractel HT 46 Harness / TH4H-3542

Tractel HT "Ladytrac" Ladies Fall Arrest Harness With Front 'D' Ring

The Ladytrac harness collection is the first range of safety harnesses which have been specially designed for women to EN361 & EN358.

Model: HT Ladytrac Harness / TLHLBH-3551

Tractel "Solsit" Electric Operation Temporary Use Suspended Working Seat With Integrated Fall Protection and Endless HOL

Single seat temporary suspended seat with integrated Tirak hoist and Blocstop safety device.

Model: Tractel SOLSIT / T-3583

Tractel VertyTrac HT44 (Standard Buckles) Fall Arrest Harness with Rear 'D' Ring and 2 x Additional Chest 'D' Rings

Harness with sub pelvic type mountain leg strap to EN361.

Model: HT44 / HH-3806

This is a harness with sub pelvic type mountain leg strap, in order to give a contort maximum to the user. It has 1 back anchorage point and 2 thoracic anchorage points with 5 adjustments : 2 adjustment of leg 2 adjustment of shoulder, 1 adjustment of eternal strap. Their ergonomic design ensures optimum comfort. They are designed for work carried out over long periods. This harnesses is many use for a little work on pylon for electricity and telecommunication. Available in sizes S, M and XL.

Tractel HT45BA VertyTrac (With Auto Buckles) Fall Arrest Harness With Front and Rear 'D' Rings

Tractel HT45BA harness 3 automatic buckles to EN361.

Model: HT45BA / HSH-3808

Tractel HT46BA VertyTrac (With Auto Buckles) Fall Arrest Harness With Front and Rear 'D' Rings and 2 x Additional Chest 'D' Rings

HT46BA safety harness in sizes S, M, XL to EN361.

Model: HT46A / THH-3809

Tractel HT46BA Harness is derived from the HT44 to which three automatic buckles have been integrated to facilitate fitting by a quick-closure system and an easy-to-adjust design. It has 1 back anchorage point 1 sternal anchorage and 2 chest anchorage. Very comfortable to use over extended work periods, thanks to its harness-type leg straps. There's possibility for using a restraining lanyard when in the work position, connected to two chest fastening points, also possibility for using a fall arrest connected to sternal anchorage. Available in sizes S, M and XL.

Tractel Evacuation Harness / Triangle HT9

Evacuation triangle with elastic shoulder strap, 30mm.

Model: HT9 / TEH-3811

Tractel VertyTrac HT42 (Standard Buckles) Fall Arrest Harness with Rear 'D' Rings and 2 x Chest 'D' Rings

Fall arrest harness with a back anchor point to EN361.

Model: HT42 / THH-3813

Tractel VertyTrac HT43 (Standard Buckles) Fall Arrest Harness with Front and Rear 'D' Rings and 2 x Chest 'D' Ring

Harness with 1 dorsal Forged D clip, 1 sternal and 2 thoracic ones to EN361.

Model: HT43 / THH-3814

Tractel "HT22 BA" 2 Point Fall Arrest Harness with Front and Rear 'D' Rings - Auto Buckles

Fall arrest harness with 5 adjustment points certified to EN361.

Model: HT22BA / THSH-3815

Tractel HT34 (Standard Buckles) Fall Arrest Harness With Front and Rear 'D' Ring and 2 x Chest 'D' Rings & Work Positioning Belt - S, M and XL

Multiple use harness with CE01 belt to EN361 & EN358.

Model: HT34 / THMUH-3842

Tractel CE01 Adjustable Work Positioning Belt For Use With Pole strap & Restraint Lanyard with 2 x Side 'D' Rings - S, M and XL

Working Belt with two lateral hitch D rings.

Model: CE01 / TCB-3848

Tractel work positioning belt is not designed to be used as a fall arrest device. Has 2 Stainless steel D rings for side anchorage, is adjustable with quick opening, and is lightweight and rot-proof. Can be combined with any tractel harness using belt loops making a fully integrated belt-harness assembly. Available in 3 sizes - Small, Medium and Extra large.

Tractel VertyTrac HT43 A (Automatic Buckles) Fall Arrest Harness with Front and Rear 'D' Rings and 2 x Chest 'D' Ring S,M,XL

Harness with 1 dorsal Forged D clip, 1 sternal and 2 thoracic ones to EN361. Automatic Buckles

Model: HT43BA / TVHB-3871

Tractel 'Stopfor K' Aluminium Rope Grab for Vertical & Horizontal Applications, for use with 11mm Braided Rope

Tractel Quick Fit Stopfor K fall arrestor without teeth

Model: stopfor K / TSKN-3886

Tractel 'Stopfor B' Aluminium Rope Grab for Vertical & Horizontal Applications, for use with 14mm Stranded Rope

Tractel Stopfor B locking system without jaws

Model: Stopfor B / TSBN-3887

Tractel "LDA 12" Braided Rope Single Leg Energy Absorbing Fall Arrest Lanyards - Length 1m, 1.5m or 2m

Tractel Single Leg Rope Lanyard with Shock Absorber

Model: LDA / TEAF-3888

Tractel "LDA 12" Braided Rope Twin Leg, Energy Absorbing Fall Arrest Lanyards - Length 1m, 1.5m or 2m

Tractel Two Leg Rope Lanyard with Shock Absorber

Model: LDAD / TFAL-3889

Energy absorbing braided twin rope lanyard.

Available in 1.5 or 2 metre lengths with a selection of connectors

Complies with EN355

Tractel 'LD 11' Single Leg Fixed Length Braided Rope Restraint Lanyard, Available in 1m, 1.5m or 2m lengths

Tractel Rope Restraint Lanyard, Available with Assorted Connectors

Model: LD Lanyard / TBSR-3890

Tractel LD 11mm braided securing rope lanyards

Available in 1m, 1.5m and 2m lengths with assorted connectors

Tractel 'LDF 11' Twin Leg Fixed Length Braided Rope Restraint Lanyard, Available in 1m, 1.5m or 2m lengths

Tractel Rope Restraint Lanyard, Available with Assorted Connectors

Model: TSLW-3891

Tractel LDF twin leg support lanyard.Available stand-alone or with assorted connectors: M10, M41, M51, M53.

Tractel Twin Sheave "Double In-line" Aluminium Pulley

Tractel "Double In-line" Pulley

Model: Double In-Line Pulley / TTSI-3894

Tractel Single Sheave "Standard S" Pulley - Fixed Flanges

Tractel "Standard S" Pulley for 13mm Ø Braided Rope

Model: Standard S Pulley / TSPF-3895

Lightweight and compact. Suitable for lifting and load deviations.

High strength. Can be coupled with a mechanical ascender.

Tractel Single Sheave "Standard S" Pulley - Opening Flanges

Tractel "Standard S" Pulley

Model: Standard S Pulley Opening Flange / TSPO-3896

The Standard S pulley is for use with specific short-term applications(lifting or hoisting)

It is a light-weight, high-strength device, which is easy to use, thanks to swing side plates.

Tractel Single Sheave "Standard M" Pulley - Opening Flanges

Tractel "Standard M" Pulley

Model: Standard M Pulley / TSSM-3897

The Standard M pulley is for use with specific short-term applications(lifting or hoisting)

It is a light-weight, high-strength device, which is easy to use, thanks to swing side plates.

Tractel Twin Sheave "Double Pulley" , Opening Flanges , Braided Rope Max. Dia. 16mm

Tractel "Double Pulley"

Model: Double Pulley / TTSP-3898

Tractel "Ascent Clamp" (foot loop) in Adjustable Webbing Strap

Tractel "Ascent Clamp". Adjustable strap foot loop

Model: Ascent clamp / TCIA-3902

The handle, equipped with an ascending loop used with a rope clamp, enables independent upward movement along a rope.

The rope clamps are used independently for rope manoeuvres.
The ascending loop is made of 20 mm PA strap, adjustable from 0.80 to 1.60 m.

Tractel "Anchor Plate" - Used in Conjunction with Right or Left Ascent Handle

Tractel "Anchor Plate"

Model: Anchor Plate / TPUI-3903

Tractel "Tripod" Large Canvas Carrying Bag for Height Safety Equipment, - L1900mm x W 290mm x H 290

Designed For Use With Tractel Tracpode Tripod

Model: Tripod Canvas Bag / TLCC-3914

The Tractel Tracpode bag is specifically designed for transporting of the Tractel Tracpode Tripod, although it can also be used for transporting other equipment. It is made of durable canvas.

Specification: Length: 1900mm,, Height:  290mm, Depth:  290mm

Tractel 'Stopfor KS' Aluminium Rope Grab, 100kg, for Vertical, Inclinded & Horizontal Applications, for use with 11mm Braided Rope

Tractel Stopfor "KS" braided rope guided fall arrestor device with additional safety function

Model: Stopfor KS / TSKA-3916

Tractel "LSE" Elastic Webbing Restraint Lanyard Single Leg Many Karabiner Options - 1.5, 1.75 or 2m

Tractel "LSE" Elastic Webbing Restraint Lanyard - No Energy Absorber

Model: LSE Lanyard / TEAF-3929

Tractel "HT22R" (Standard Buckles) Fall Arrest Harness With Front and Rear 'D' Rings and Rescue Strap for Vertical Lifting

Tractel Fall arrest harness complies with EN360 and EN1497

Model: HT22R Rescue Harness / TVHB-3935

The HT22R is from the HT22 range and features a back anchor point, a chest anchor point and adjustable thoracique webbing with quick fitting buckle. This model featues a rescue strap to enable vertical lifting. Weight : 720 g. Size : S, M, XL. Working belt, size : S, M, XL. Thermo-compressed foam shoulder pad. Thigh straps adjustment : quick fitting buckles.

Tractel HT "Ladytrac B" Ladies Fall Arrest Harness With Front 'D' Ring and Work Positioning Belt

The Ladytrac harness collection is the first range of safety harnesses which have been specially designed for women

Model: Ladytrac B / THBL-3940

Tractel "Protective Sleeve" To Protect Lanyards and Pole Straps From Sharp or Abrasive Edges

50cm Length

Model: Protective Sleeve / TSTP-3963

Tractel "Mobifor" Mobile Deadweight Fall Arrest Anchorage System, to EN 795 E /2012.

Mobifor dead weight mobile anchor point system - a fast, reliable solution for setting up a temporary or permanent anchor on terrace roofs.

Model: Mobifor / TMDF-4169

Tractel "TU16H" Hydraulic Tirfor (Supertirfor), Wire Rope Lifting & Pulling Winch - 1600kg

Optional Hydraulic power pack with electric or petrol motor.

Model: THTW-4306

The powered models of the TIRFOR machines complement the manual units for heavy loads, such as operating large work platforms, lifting shuttering, moving machinery, etc.
Depending on the application, the working conditions and the power available, powered operation can be electro-hydraulic or pneumatic.
Key Benefits: Saves time and labour; No operator fatique; Continuous operation; Increaded safety; One powerpack can power 4 Tirfor units all pulling/lifting the same load.

Tractel "TR2000" Red, White or Blue Adjustable Climbing Helmet with Optional Fittings.

Easily Adjustable, Comfortable, Available with a Range of Accessories

Model: TR2000 / TACH-4341

LiftingSafety "AutoHook" Automatic Gravity Load/Release Hook, Range 2,000kg to 10,000kg

Gravitational Release Mechanism, No access to Hook Required

Model: LAGR-4403

Tractel "Poulistop" Builders Gin Wheel with Brake - 50kg Capacity

Manual safety pulley system with brake designed for temporary lifting installations on construction sites.

Model: Poulistop 2 / TBGW-4445

Tractel "EP Series" EN 1808 Man-Riding Pulley Blocks / Snatch Blocks, WLL Range from 1600kg to 4800kg

Wire rope snatch blocks certified for both man-riding and materials handling applications. Various suspension options.

Model: EP Series / MRPS-4452

Tractel "HT Electra" Linesman Harness with Rear 'D' Ring, Front Chest Webbing Loops for Fall Arrest and 2 Large 'D' Rings on Belt for Work Positioning

Designed for work in the utilities industry, on pylons where a high degree of mobility is required, ensuring high amplitude of rotation (150°).

Model: HT Electra / TELH-4453

Tractel "HT Greentool" Arborist Harness with Built-in Rigid Work Seat. Various Fall Arrest and Restraint Anchor Points

Arborist harness designed specifically for tree surgeons.

Model: HT Greentool / TGAH-4454

Tractel "HT Promast" 5 Point Rope Access Harness with Front and Rear Connection Points and Work Positioning Belt

Designed for work on ropes during extended-duration suspended interventions. 2 fall arrest points, 1 belly suspension point and 2 working positioning points on belt.

Model: HT Promast / TPRA-4455

Tractel "HT Easyclimb" Harness with Various Connection Point Including a Unique Umbillical Fall Arrest Anchor Point

Designed for movement (up or down) on structures equipped with an EN 353.1 rail or cable fall arrester device equipped with an approved fall arrest umbilical roll prevention system attachment point.

Model: HT EasyClimb / TEH-4456

Tractel "Handifor" Mini-weigher / Load Cell - Range from 20kg to 200kg Capacity (4 Options)

A convenient digital weigher for measuring small weights quickly and easily, including hooks.

Model: Handifor / HMWL-4459

Tractel "Dynarope HF36" Tension Meters - WLL Range from 500 daN to 40,000daN and For use with 20 to 44mm wire rope

Electronic tension load cells designed to measure effort applied to a wire rope without disassembling the rope.

Model: HF36/3/LPT / TDTM-4531

Tractel Corso Beam Clamp - Range 1000kg to 10,000kg

Tractel adjustable beam clamp in black (or standard blue), for use in the entertainment industry.

Model: TCBC-4639

Tractel Maxiflex Wire Ropes for Use with Tractel Tirfor™ & Jockey™ Lifting and Pulling Machines

Wire ropes for use in Tirfor™ and Jockey™ cable pulling machines from Tractel.

Model: TMWR-4740

Tractel Accessories for Use with Tractel Lifting and Pulling Machines

Accessories for use in Jockey, Tirfor, Minifor and Tirak machines from Tractel.

Model: TAFU-4741

Tractel Wire Ropes for Use with Tractel Minifor Portable Electric Hoists

Wire ropes for use in Minifor machines from Tractel.

Model: TMWR-4742

Tractel Wire Ropes for Use with Tractel Tirak Lifting and Pulling Machines

Standard wire ropes for use in Tirak™ cable pulling / lifting machines from Tractel. Anti-spin version available upon request.

Model: TTWR-4743

Tractel Guard Trac™ Plus Stand Alone Safety Rail / Barrier

1.1m Free Standing, Non-Penetrating Barrier System. Conforms & Certified According to the EN 13374-A:2019 and the EN ISO 14122-3:2016

Model: TGTP-5089

Tractel Guard Trac™ Stand Alone Safety Rail / Barrier

Free Standing, Non-Penetrating Barrier System. Conforms & Certified According to the EN 13374-A:2019

Model: TGT-5090

Tractel Volt-Trac Electric Chain Hoist

400v 3ph 50Hz, 250kg to 2000kg electric hoist with various suspension options including hook, eye, manual trolley or electric powered trolley.

Model: VoltTrac / TVEH-5114

Tractel 'BSO' Fall Arrest Blocstop™ - Manriding Applications

Blocstop™ secondary safety device

Model: TFAB-5150

Tractel 'BSO' Blocstop™ - Material Handling

Load arrestor for material transportation

Model: TBMH-5151

Tractel 'BS' Blocstop™ - Manual Version

Manual release Blocstop for material and man-riding

Model: TBMV-5152

Tractel Blocmat™ 'S' & 'SI' Load Arrestors

Ceiling and Floor assyembly load arrestors

Model: TBLA-5153

Tractel 'TSD' Blocmat™ Self Retracting Load Arrestors

Equiped with new top system dissipator

Model: TBSR-5154

Tractel TOPAL 'TLR' Horizontal Lifting Clamps for Lifting Plates - Range from 2000kg to 10000kg

Large Jaw Clamps for lifting horizontal plates individually or in bundles. Must be used in pairs, but sold individually.

Model: TTTH-5156

Tractel TOPAL 'TLC' Horizontal Lifting Clamps for Lifting Plates - Range from 500kg to 3000kg

Clamps for lifting horizontal plates individually or in bundles. Must be used in pairs, but sold individually.

Model: TTTH-5157

Tractel TOPAL 'TLH' Horizontal Lifting Clamps for Lifting Plates - Range from 1000kg to 10,000kg

Clamps for lifting horizontal plates individually or in bundles. Must be used in pairs, but sold individually.

Model: TTTH-5158

Tractel 'XBag' Cross Lifting Beam for Big-Bags - Range from 1500kg to 3500kg

Lifting beam for big bags with lifting loops

Model: TCLB-5159

Tractel TOPAL 'TE' Automatic Load Positioner for Chain - Range from 1600kg to 4500kg

Load positioning lifting eye for use with lifting chain

Model: TTAL-5160

Tractel TOPAL 'TF' Automatic Load Positioner for Double Wire Rope - Range from 1500kg to 20,000kg

Load positioning lifting eye for use with double wire rope

Model: TTAL-5161

Tractel 'Dynafor Industrial' Digital Load Cell - Range from 1000kg to 20,000kg Capacity (5 Options)

Digital weighing device.

Model: TIDL-5162

Tractel 'Dynafor Pro' Digital Load Cell - Range from 1000kg to 250,00kg Capacity (multiple options)

Digital weighing device with bluetooth module for a wireless reading

Model: TPDL-5163

Tractel 'Dynafor Expert' Digital Load Cell - Range from 500kg to 10,000kg Capacity (multiple options)

Digital weighing device with bluetooth module for a wireless reading

Model: TEDL-5164

Tractel 'LCM 03' Steel Cable Reinfored Braided Rope Adjustable Work Positioning Lanyard, Length 2m, 3m or 4m

Adjustable Pole Strap for Work Positioning c/w Sliding Jaw Adjuster & Snap Hook

Model: TAWP-5165

Tractel 'LCM 05' 12.5mm Braided Rope Adjustable Work Positioning Lanyard, Length 2m, 3m or 4m

Adjustable Pole Strap for Work Positioning c/w Sliding Jaw Adjuster & Snap Hook

Model: TBRA-5166

Tractel 'blocfor™ 1.8 ESD 150kg' Inertia Reel Personal Fall Limiter (PFL) - 1.8 metre

150kg Automatic Fall Arrestors

Model: TEIR-5168

Tractel 'blocfor™ 1.8A EVO ESD 150kg' Inertia Reel Personal Fall Limiter (PFL) - 1.8 metre

150kg Automatic Fall Arrestors

Model: TEEI-5169

Tractel 'blocfor™ 1.8B EVO ESD 150kg' Inertia Reel Personal Fall Limiter (PFL) - 1.8 metre

150kg Automatic Fall Arrestors

Model: TEEI-5170

Tractel 'blocfor™ 5 ESD and 6 ESD' Fall Arrest Block, Length Options 5 or 6 metre

Fall arrestors Compliant with EN 360 and CNB/P/11.060 standards

Model: TEAE-5171

Tractel 'blocfor™ 10 ESD' Fall Arrest Block, Length 10 metre

Fall arrestors Compliant with EN 360 & VG11 CNB/P/11.060

Model: TEFA-5172

Tractel 'blocfor™ 20 and 30 ESD' Fall Arrest Block, Length Options 20 or 30 metre

Fall arrestors Compliant with EN 360 & VG11 CNB/P/11.060

Model: TAEF-5173

Tractel 'Stopfor BF' Rope Grab System for Vertical & Horizontal Applications, for use with 14mm Stranded Rope

Tractel Stopfor B fall arrestor suitable for vertial or horizontal use

Model: TBRG-5175

Tractel 'Stopfor MSP' Steel Rope Grab for Vertical & Horizontal Applications, for use with 14mm Stranded Rope

Tractel Stopfor MSP fall arrestor with anti-reversibility system and packing lock

Model: Stopfor MSP / TMRG-5176

Tractel 'Stopfor SL' Stainless Steel Rope Grab for Vertical Applications, for use with 14mm Stranded Rope

Tractel Stopfor SL fall arrestor with anti-reversibility system

Model: TSSS-5177

Tractel 'RLX 14' 14mm Stranded Rope Anchor Line, Length Options 5m to 50m

RLX 14mm stranded rope anchor line for use with Stopfor B / BF / MSP / SL

Model: TALL-5178

Tractel 'LDR' 11mm Stranded Rope Adjustable Work Positioning Lanyard, Length 1.5m or 2m

To EN358, Adjustable from 0.75 to 1.5m (1.5m) or from 1 to 2m (2m)

Model: RSRA-5180

Tractel "Magfor II" Permanent Lifting Magnets, Range from 100kg to 5000kg

Tractel permanent lifting magnets for round or flat materials handling.

Model: TIPL-5181

Tractel "Magfor II TP" Thin Plate Permanent Lifting Magnets, Range from 180kg to 300kg

Tractel permanent lifting magnets for thin plates

Model: TITP-5182

Tractel "Magfor II HT" Hot Temperature Permanent Lifting Magnets, Range from 200kg to 800kg

Tractel permanent lifting magnets for lifting very hot materials.

Model: TIHH-5183

Tractel "Magfor II HO" Permanent Lifting Magnets with Threaded Holes (instead of lifting ring), Range from 100kg to 1000kg

Tractel permanent lifting magnets with 4 threaded holes.

Model: TIHP-5184

Tractel 'Stopfor KS' Aluminium Rope Grab, 150kg, for Vertical Applications, for use with 11mm Braided Rope

Tractel Stopfor "KS" braided rope guided fall arrestor device with anti-reverse system

Model: Stopfor KS / TKAR-5186

Tractel 'Stopfor KSP' Aluminium Rope Grab, 100kg, for Vertical, Inclinded & Horizontal Applications, for use with 11mm Braided Rope

Tractel Stopfor "KSP" braided rope guided fall arrestor device with anti-reverse system

Model: TKAR-5187

Tractel 'Stopfor KSP' Aluminium Rope Grab, 150kg, for Vertical Applications, for use with 11mm Braided Rope

Tractel Stopfor "KSP" braided rope guided fall arrestor device with anti-reverse system

Model: TKAR-5188

Tractel 'RLX D' 11mm Braided Rope Anchor Line, Length Options 5m to 50m

RLD 11mm braided rope anchor line for use with Stopfor K / KS / KSP

Model: TDBR-5189

Tractel "LSEA" Elasticated Webbing Lanyard Single Leg - Choice of Karabiners, Length: 1.5m ot 1.8m

Tractel Energy Absorbing Fall Arrest Elastic Webbing Lanyard

Model: TEAF-5201

Tractel DynaSafe Mecha Mechanical Load Limiter, Rope Dia. Range Options from 5mm to 35mm

This mechanical load cell has been designed to provide a trip point for lifting systems which have a dead end wire rope.

Model: TDMM-5202