These shackles have capacities from 6.5 to 55 metric tonnes. They are forged - quenched and tempered, with alloy pins. The working load limit is permanently shown on every shackle. The also feature quick-check deformation and angle indicators forged on the bow.

All ROV shackle bows, unless otherwise noted are galvanised and then painted fluorescent yellow.

Features: Forged Alloy Steel 2 thru 200 metric tons. Cast Alloy Steel 250 thru 400 metric tons. Working Load Limit is permanently shown on every shackle. All sizes are individually proof tested to 2.0 times the Working Load Limit. Pins are galvanized and painted red.
Certification must be requested at time of order. Shackles are quenched and tempered and can meet DNV impact requirements of 42 joules at -20 C.

These shackles significantly improve the life of wire rope slings. They can be used to connect HIGH STRENGTH round slings, synthetic round slings or wire rope slings. An increase in shackle bow radius provides minimum 58% gain in sling bearing surface, increases usable sling strength a minimum of 15%.
Features: Quenched and tempered for maximum strength, forged alloy steel, available in galvanized (G2169) and self-coloured (S2169) finish.

Capacities of 7, 12.5 and 18 metric tonnes

Crosby Button spelter sockets are designed for use with mobile cranes, used to terminate high performance, rotation resistant ropes, and standard 6 strand ropes, with rope sizes from 1/2" to 1-1/2". Both the Sockets and buttons are re-usable.  Button Spelter terminations have a 100% efficiency rating, based on the strength of the wire rope. Easy to install assembly utilizes Crosby WIRELOCK socketing compound. Replacement buttons and sockets are available.

The Crosby S-319 swaging shank hook utilizes standard Crosby 319N shank hooks with interlocking hook tip. Each hook has a pre-drilled cam which can be equipped with a latch. They have a black oxide finish on body (Shank is uncoated). Wide range of sizes available. Working Load Limit: 0.4-14 tons. Wire Rope sizes: 3/16" thru 1-1/8". Swage shank hook terminations have an efficiency rating of 95%. Quenched and Tempered. Heat treat process allows for ease of swaging.

The Crosby S319 Hoist Shank Hooks from 500kg to 75 tonnes incorporate markings forged into the product which address two (2) QUIC-CHECK features. They are supplied designed with deformation indicators - two strategically placed marks, one just below the shank or eye and the other on the hook up, which allows for a QUIC-CHECK measurement to determine if the throat opening has changed, thus indicating abuse or overload.

.

Crosby BLC & BLA Closed Swivel Bail Golden Gate Hoist Hooks are for use where hoisting line or shackle can be inserted into the bail. They are suitable for infrequent, non-continuous rotation under load.  Use in corrosive environment requires shank and nut inspection in accordance with ASME.

BL-C - with self-closing gate.
BL-A - with manual-closing gate. 

The Crosby Open Swivel Bail hoist hook is for attachment to a link chain.They are suitable for infrequent, non-continuous rotation under load. Use in a corrosive environment requires shank and nut inspection in accordance with ASME B30.10-1.2.1(b)(2)(c)2000.   

BL-E - with Self-Closing Gate.
BL-G - with Manual-Closing Gate

Our range of Crosby BLO & BLP Link Chain Nest Golden Gate Hooks are fitted with ball bearing swivel and attach to the chain by an alloy pin. They are suitable for infrequent, non-continuous rotation under load. Use in a corrosive environment requires shank and nut inspection in accordance with ASME B30.10-1.2.1(b)(2)(c)2000.
    BL-O - with Self-Closing Gate
    BL-P - with Manual Closing Gate

The Crosby BLS & BLR Roller Chain Nest Golden Gate Hook has an attachment with ball-bearing swivel and full-floating connector and is suitable for frequent rotation under load. Use in a corrosive environment requires shank and nut inspection in accordance with ASME B30.10-1.2.1(b)(2)(c)2000.
    BL-S - with Self-Closing Gate
    BL-R - with Manual Closing Gate

The range of Crosby BLD & BLB Standard Length Golden Gate Shank Hook are for use on existing load blocks requiring extra shank length. No.'s 2 through 12 style hooks are threaded approximately 80% of shank length.
BL-D - with Self-Closing Gate
BL-B - with Manual Closing Gate

Our Crosby BLK and BLI Long Length Golden Gate Shank Hooks are for use on existing load blocks requiring extra shank length.
No.'s 4 through 9 style hooks are threaded approximately 80% of shank length.
BL-K - with Self-Closing Gate
BL-I - with Manual Closing Gate

Our Crosby A350N Sliding Choker Hoist Hooks are the new style and incorporate throat opening equal to or larger than old style hooks. Each product has a Product Identification Code (PIC) for material traceability, and the name Crosby or "CG" forged into it. All hooks incorporate Crosby's QUICK-CHECK marks to help in determining if throat opening dimension has changed. Each hook can be equipped with a Crosby S-4320 heavy duty stamped latch with the high cycle, long life spring.

The range of Crosby S293 Rivet Eye Bolts are made from forged steel that is quenched and tempered. There are 9 options to choose from with different shaft diameters and lengths.

Remember: these are not threaded!

Our comprehensive range of Crosby HR125C Hoist Rings are designed with an integrated chain connector to be connected to lifting chain making this option of swivel hoist ring very versatile and are options for rings with capacities from 2 to 8.2 tonnes WLL. The chain grab is designed to fit Grade 8 Chain size 7, 8, 10, 13 and 16mm and the body of the swivel hoist ring is made from forged Alloy Steel with a design factor of safety at ratio  4:1. Individually Proof Tested to 2-1/2 times Working Load Limit. "Yellow Chromate" finish for increased corrosion protection. Full 360 degrees swivel and 180 degrees pivot action.

All load bearings or holding parts on these binders are forged. They Utilise standard Crosby A-323 Alloy Eye Grab Hooks. Continuous take-up feature, infinite adjustment, gets the last half of chain. For use with Grade 7 Transport Chain. New design "one piece" forged handle. One piece assembly, no bolts or nuts to loosen. Ratchet spring is rust proofed. Easy operating positive ratchet.

This Crosby R-10 Binder without Links and Hooks, Meets or exceeds DOT and CVSA Cargo Securement Tie-Down Guidelines,

The Crosby LOK-A-LOY 10 Alloy Connecting Link is used to connect grade 10 lifting chain though this chain connector is suitable for use with both Grade 80 or Grade 100 chain. The lock alloy links are Individually Proof Tested at 2.5 times the Working Load Limit (WLL) with CE certification.
Features: Locking system that provides for simple assembly and dis-assembly - no special tools needed, 25% stronger than Grade 80, meets ASTM A-952-96 standards for Grade 100 chain fittings, forged alloy steel - quenched and tempered.  Fatigue rated.

This is the range of Crosby S247 Double Clevis Links; all the load pins used are Alloy Steel that is quenched and tempered and the body is body is forged and heat treated carbon steel. Working load limits offered are from 1.18 tonne to 4.17 tonne. Designed for linking all popular sizes of the Crosby Spectrum 3 and Spectrum 4 chain to rings, end links, eye hooks, pad eyes, tractor eyebolts, etc. Quick and easy assembly.

Crosby AS11  Thimble / Jaw  Angular Contact Bearing Swivel are one of many different end fitting choice for the Crosby swivel range.  Capacity: .45t -35 tons. Wire Rope Sizes: 1/8" through 1-1/2".

Angular contact bearings maximize efficiency, reliability and service life of swivel and extend the life of the wire rope.
Designed for high rotation speed: Lower torque required to initiate rotation.

Crosby AS17  Bullet Jaw Slurry  Angular Contact Bearing Swivel are one of 9 options of Crosby swivel in this style and offer capacities of up to 35 tonne. Wire Rope Sizes: 1/8" through 1-1/2". Angular contact bearings maximize efficiency, reliability and service life of swivel and extend the life of the wire rope. Designed for high rotation speed, with lower torque required to initiate rotation. Individually Proof Tested to 2 times the Working Load Limit with certification.

McKissick Finished Bore Sheaves can be equipped with bushings or bearings at an optional charge. Roll Forged sheaves are available in sized up to 72" in diameter. 14" diameter sheaves and larger are Roll Forged with Flame hardened grooves to minimum Rockwell 35C.

The McKissick Stepped hub eliminates stress failure in the weld, common in normal hub designs. The hub is pressed into place with complete metal-to-metal contact. This helps ensure an accurate alignment to the hubs axis so there's no wobble or lopping of the rotating sheave.

McKissick® Tapered Bearing Sheaves are designed to operate on shafts machined to +/- .0005 of the indicated shaft size. Applications should provide for tightening separator plates against bearing cones to adjust and insure proper function of bearing. For sizes not listed, McKissick® Finished Bore Sheaves can be equipped with tapered Bearings at an addtional charge.

Roll Forged™ sheaves are available in sized up to 72" in diameter

All single point shank hooks are genuine Crosby®, forged alloy steel, quenched and tempered, and have the patented QUIC-CHECK markings (Duplex hooks are available on most sizes). All 380 Blocks are furnished standard with Roller Bearings.
Options: Bronze bushed sheaves, duplex hooks, swivel tee and shackle assemblies, sheave shrouds, anti rotation - locking device (75 tons & larger), plate steel cheek weights, third party testing with certification available upon request.
  

There is a wide range of the product available, from a capacity of 5 to 80 tons. Sheave sizes from 10" to 20" and wire line sizes from 7/16 to 1-1/4". All single point shank hooks are genuine Crosby®, forged alloy steel, quenched and tempered, and have the patented QUIC-CHECK markings (Duplex hooks are available on most sizes).

Available options: Duplex hooks (75 tons & larger), swivel tee and shackle assemblies, sheave shrouds, anti rotation - locking device (75 tons & larger), plate steel cheek weights, third party testing with certification available upon request. Larger sizes available on request.

All single point shank hooks are genuine Crosby®, forged alloy steel, quenched and tempered, and have the patented QUIC-CHECK® markings. Can be used with a magnet and a drop ball for scrapyard work. Durable - allows longer continuous duty cycle. Single sheave design dual action hook (Swings and rotates). Utilizes McKissick® Roll-Forged™ sheaves with flame hardened grooves. Furnished standard with bronze bushed sheaves. Optional tapered roller bearings.

Wide Range of Sizes Available:  30 and 60 Ton Capacity,  1 to 2-1/4 Wire Line Size, 16 to 24 Sheave Diameter,  Larger Capacity Blocks available. TU480, TU481, TU482, TU483 and TU484 all with different end fittings.
Multiple Configurations Available: Swivel hook, swivel shackle, tailboard, upset shackle, fixed shackle
McKissick Roll-Forged Sheaves: Flame hardened grooves, 30 ton furnished with roller bearings, 60 Ton furnished with tapered roller bearings with seals.

There is a wide range of this product available, with capacities from 5 to 100 tons and larger models available upon request. Available with sheave sizes from 6" to 24" O.D. and wire line sizes from 3/8" to 1-1/4". All units are equipped with genuine Crosby® forged steel, quenched and tempered shackles that contain the patented QUIC-CHECK® markings. Design Factor 4 to 1. All 680 Series Blocks are furnished standard with bronze bushings. All 680 blocks 16" and larger, are furnished with McKissick® Roll Forged™ sheaves with flame hardened grooves. Sheaves are lubricated through centre pin, with a separate lube channel to each sheave.

The Hooks on the McKissick Light Champion Blocks are made from Forged alloy and heat treated. They have Forged steel swivel tees, yokes and shackles. The Block's opening feature permits insertion of rope while block is suspended from gin-pole.  Hook and shackle assemblies on 4-1/2" through 14" sizes can be interchanged.  Can be furnished with bronze bushings or roller bearings. 3" thru 18" 418 and 419 blocks have exclusive bolt retaining spring to assure no lost bolts.  Can be furnished with SS-4055 hook latch.  Pressure lube fittings. Fatigue rated.  3" - 10" feature dual rated
 

On these blocks, the hooks and side plates are forged alloy steel and heat treated, the shackles and yokes are forged and heat treated steel, all other parts are forged. Side plates are designed to eliminate possibility of rope jamming. Can be furnished with bronze bushings or sealed roller bearings. Opening feature permits insertion of rope while block is suspended from gin-pole. Can be furnished with S-4320 hook latch. Pressure lube fittings. Fatigue rated. Hook and shackle assemblies can be interchanged. Blocks furnished with dual rated wireline sheaves. Fatigue Rated.

Manufactured with drop forged, heat treated swivel hook or swivel shackle. The Blocks can be furnished with bronze bushings or roller bearings and also with a hook latch. Hook and shackle assemblies on 8" through 14" sizes can be interchanged. Pressure lube fittings. 8" thru 10" 430 and 431 blocks have exclusive bolt retaining spring to assure no lost bolts. 8" and 10" models furnished with dual wireline sheaves.   Fatigue Rated.

Light champion snatch block as a double sheave block. Drop forged swivel hook or swivel shackle. Can be furnished with bronze bushings or roller bearings. Opening feature permits easy insertion of wire rope in both sheaves with removal of one bolt. Can be furnished with hook latch. Pressure lube fittings. 4 1/2" - 10" models furnished with dual rated wireline sheaves. Fatigue Rated. All sizes are RFID EQUIPPED.

These blocks have a painted and galvanized finish. The 8" and 10" blocks are furnished with dual rated wireline sheaves. They have forged steel swivels, tees, yokes and the shackles are quenched and tempered. The recessed side plate design reduces the gap between the sheave rim and the side plate and allows the sheave assembly to be captured in the block if loss of centre pin occurs. The sheave is lubricated through the centre pin for easy maintenance.

The Entire block is made from heat treated alloy steel. Use of heat treated alloy. It also has 60% of the weight of blocks of comparable capacities. It is available with a bronze bushed or roller bearing sheaves. 416 with Hook; 417 With Shackle; 402 Tail Board

Snatch Block Features: Hook and shackle assemblies can be interchanged; Pressure lube fittings. Can be furnished with S-4320 hook latch.
Blocks furnished with dual rated wireline sheaves.  Fatigue rated. Easy opening feature of “Champion” blocks has been retained when designing this unit.

Supplied with Heavy Duty Components, the Hook is Forged Alloy Steel, Quenched and Tempered. This Block was designed for fast, efficient line changes. All parts of this unit are forged.  Beaded side plate prevents rope from jamming. Available with hook, shackle or tailboard (pin only). Can be furnished with hook latch. Blocks furnished with dual rated wireline sheaves. Fatigue Rated.

On these Lebus Snatch Blocks the Hook is Forged Alloy Steel, Quenched and Tempered. All parts of the block are forged. The Block can easily be opened and closed in seconds without the use of tools and is available with hook, shackle or pin only (tailboard).  Either wire or manila rope may be used. Can be furnished with hook latch. The blocks are furnished with dual rated wireline sheaves.

Supplied with Forged steel sheaves, bronze bushings, and drop forged steel hooks. Complete with a Pressure lube fitting. Self-locking style. Locks with hook load. Can be furnished with S-4320 hook latch. Furnished with dual rated wireline sheave.

Made from alloy aluminium housing for maximum strength and minimum weight. Conductor cable ONLY is recommended for use with Well Logger's Blocks. These are made for use in high speed well logging, perforating, etc. Designed with an extra-large double row, with a pre-adjusted sealed tapered bearing. Quick opening pin for fast string-up, light weight for easy handling.

These Oilfield Crown blocks are built using McKissick Roll-Forged sheaves with flame hardened grooves. They are designed with double row pre-adjusted sealed tapered bearings mounted on a steel shaft and heavy centre and side plates for proper support of centre pin. They are supplied in pre-assembled units for rapid attachment to crown assembly for installation on derrick. On multiple sheave assemblies, one sheave can be grooved for sand line on request.

Regular wood block with laser cut side plates, with Grade 5 bolts secured in place with lock washers and staked nuts. Bronze brushed sheaves with larger bearing diameter for extended block life. Beckets furnished on all blocks.

Manila block with laser cut side plates. Uses grade 5 bolts secured with lock washers and staked nuts. Bronze brushed sheaves with larger bearing diameter ensure an extended block life. New style hanger for fitting attachment.

These blocks are built to carry the increased loads of synthetic fibre ropes. All hooks are heat-treated alloy steel. You can now use a smaller size rope, and in turn a smaller block, providing capacities which were previously not possible.

Used for light housing by roofers and contractors and is furnished with drop forged swivel latch hooks.

Rope blocks with laser cut painted side plates (these can be furnished as galvanized upon request). Complete with grade 5 bolts secured with lock washers and staked nuts. All sizes of the block feature bronze brushed steel sheaves with larger bearing diameter for extended. New style hanger for fitting attachment; available with hanger only (no fitting).

This unit is available painted or galvanized, fitted as standard with steel sheaves, self lubricated and bronze bushed.

These blocks are available painted or galvanized and are fitted with steel sheaves as standard. Every unit is supplied self lubricated and bronze brushed.

These lead blocks have self-lubricated bronze bearings. They are available painted or galvanized. The base plates are not drilled.

We offer here our range of Crosby A1345N Master Link Assemblies. Otherwise better known in the UK as a quad assembly, they are made from alloy steel and are quenched and tempered. Each individually A1342N quad assembly is proof tested and supplied certified. Proof tested with fixture sized to prevent localized point loading per ASTM A952. Proof test certification shipped with each link.  All sizes are drop forged. "Look for the platinum colour - Crosby Grade 100 Alloy Products."

Crosby A-1343 products meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26. Available in sizes A13 through A45. Alloy steel - quenched and tempered. Design factor of 4 to 1. Individually proof tested. Each link has a product identification code (PIC) for material traceability, along with the size and "CG" stamped into it.

Crosby S320AN available in the following size - 1600kg.

Chain size - 7mm.

The range of Crosby ROV Sub-sea Fluorescent Eye Hooks are designed specifically for use in offshore installations and marine applications. They have the hook identification code stamped on each hook, all quenched and tempered and are fitted with the Crosby QUIC-CHECK® angle indicators forged into the top eye and deformation and angle indicators forged on the hook. They also have a fluorescent yellow finish for high "sub-sea" visibility.

Introducing the brand new Crosby permanent lifting magnets, with a fully welded solid steel construction. Fully certified in accordance with EN13155.

The GrabiQ CG C-grab is designed for use with master links, eye hooks and choke.

All GrabiQ C-grab connectors can be equipped with QuickPin.

The GrabiQ Duo CGD coupler is designed for use with master links.

All GrabiQ connectors can be equipped with QuickPin.

The C-lok CL is designed for use with master links, eye hooks and choke.

All GrabiQ C-connectors can be equipped with QuickPin.

The GrabiQ C-lok Duo CLD is designed for use with master links.

All GrabiQ C connectors can be equipped with QuickPin.

The Roundsling Hook is the perfect load connection solution, combining the advantages of both the soft lifting slings and grade 100 components.

The RH is a connector as well as a hook, which gives the user increased flexibility.

Can, at any time, be inserted into the soft sling and give a safer and quicker assembly than a shackle, and will be the ideal solution when you want to increase the use of your soft slings, without jeopardise the safety of your personnel and goods.

The double latch BK-hook with a recessed trigger - the safest self-locking hook in the market.

The innovative and patent pending solution for the offshore oil & gas industry, is as simple as it is good. If for any reason the latch will accidentally come open, either by a direct hit on the trigger or that the trigger has been worn out, an extra latch will be there to keep the load in its place.

• GrabiQ Series
• Made from Alloy Steel
• Wide Availability

• Grade 10
• For 1, 2, 3 and 4 Leg Slings
• GrabiQ Series
• Wide Availabilty

• GrabiQ Series
• Grade 10
• Oversized for 1 or 2 Leg Slings
• Wide Availability

• GrabiQ Series
• Alloy Steel,
• Designed For Use On Crane Hooks
• Wide Availability

• GrabiQ Series
• Designed for use with Chain or Wire Rope
• For 3 / 4 Leg Slings
• Wide Availability

• Grade 10
• GrabiQ Series
• Made from Alloy Steel
• All-in-one compact top link

• Grade 10
• GrabiQ Series
• Made from Alloy Steel
• All-in-one compact top link for 2-leg slings.

GrabiQ Series, Alloy Steel, wide availability, for 22mm Chain

• Instant Mounting
• Close/Open Function in Both Directions
• Firm Mounting With Locking Set

The patented new design of the RLP makes it suitable also in applications where a conventional lifting point would not be fully adequate. Intended to be used as a lifting point, lashing point or towing attachment.

Alloy Steel, wide availability

Gunnebo Grade 8 "EKN Series" Sling Hook With Latch - 32,000kg, For 32mm Chain Slings

Gunnebo Grade 8 "EK Series" Sling Hook - 32,000kg, For 32mm Chain Slings

Gunnebo Grade 8 "EGKN Series" Sling Hook With Latch Range from 2,000kg to 8,000kg, For 7mm to 16mm Chain Slings

Gunnebo Grade 8 "OKE Series" Foundry Hook 31,500kg, For 32mm Chain Sling

Gunnebo Grade 8 "LKNK Series" Swivel Latch Hook With Ball Bearing 2,000kg to 8,000kg, For 7-16mm Chain Slings

Gunnebo Grade 8 "LKNG Series" Swivel Hook 8,000kg, For use with a 16mm Chain Sling

Gunnebo Grade 8 "OG Series" Grab Hook Range 2,000kg to 8,000kg, For use with 7 to 16mm Chain Slings

Gunnebo Grade 8 "GKL Series" Chain Shortening Clutch Range 1,120kg to 8,000kg, For 6mm to 16mm Chain Slings

Gunnebo UKN Weld-On Hook Range From 750kg to 15,000kg, With Curved Welding Plate

Gunnebo "GSA Series" Clevis Shackle Range From 2,000kg to 8,000kg, For 7mm to 16mm Chain Slings

Gunnebo Grade 8 "ELP Series" Lifting Point Range From 1,000kg to 3,000kg, Alloy Steel, wide availability

Gunnebo Grade 8 "SKLU" Un-Insulated Roller-Bearing Swivel Range From 15,500kg to 21,600kg, For 22mm and 26mm Chain Slings

Gunnebo Grade 8 "KLB" Black Lifting Chain Range 1,120kg to 31,500kg, Heat treated, Hardened & Tempered

Gunnebo Grade 10 "GrabiQ KLA" Blue Lifting Chain Range 1,500kg to 40,000kg, Heat Treated, Hardened & Tempered

Kito lever blocks in two capacities. They are extremely compact and light which makes these LX series hoist are suitable for work in tight quarters or elevated locations. The grade 100(1000N/mm2) chain, made from special high strength alloy, features an unbeatable combination of toughness and resistance to corrosion & wear. Available in 250kg and 500kg.

Kito's innovative technology makes this new model smaller and lighter than ever before. The L5LBO is easy to carry and store, and the LEVER BLOCK is much easier to use, even in a narrow working spaces. Bottom Yoke with protecting guard Features a guard protecting the chain pin & nut from damage, enhancing safety. For special environments please get in contact with us, since corrosion resistance varies depending on the corrosives gases or substances that are involved.

The Kito CX Mini Manual Chain Hoist is perfect for lifting a light load, its ultra compact, portable build allows for safe operation in tight areas.

The Hoist boasts an advanced safety mechanism and Overload Limiter as standard.

The Kito M3 CB 'Mighty' range of hand chain hoists (manual hoists), boasts an array of high quality features while maintaining one very important key characteristic, it's lightweight design. Higher efficiency and more compact size, these hoists are invaluable in lifting applications

A highly efficient, very durable and reliable hand chain block.Available in sizes 500kg, 1000kg, 1500kg, 2000kg, 2500kg, 3000kg, 5000kg, 7500kg, 10,000kg, 15,000kg, 20,000kg and 30,000kg.

Kito CF Series Manual Chain Hoists provide years of quality, reliable service due to the high quality components used when the hoist is manufactured.

The CF manual hoists are fabricated with head-treated components, sealed bearings and industry-leading quality.

Perfect for environments with combustible gases, vapors, and dusts. Kito's RCB Series Spark-Resistant Hand Chain Hoist is designed for petroleum, gas, pharmaceutical and food industries - or any environment where safety is improved by the use of anti-sparking equipment.

This is available in two models, the plain push trolley or the geared trolley.

The plain push trolley comes with capacities of 500kg, 1000kg, 1500kg, 2000kg, 2500kg, 3000kg and 5000kg.

The geared trolley comes with capacities of 500kg, 1000kg, 1500kg, 2000kg, 2500kg, 3000kg, 5000kg, 7500kg, 10,000kg, 15,000kg, 20,000kg and 30,000kg.

Kito's "SHB Series" Ultra-Low Headroom Manual Chain Hoist is perfect for lifting applications where space is limited and where longer hook travel is required.

The trolley comes with an built-in geared trolley configuration that minimizes beam-to-hook distance allowing for extra lifting space.

Kito's Unique Beam Clamp Design appears in the TK Series, it comes with a Shackle as standard and can support anything from 1000kg up to 10000kg.

It comes with a corrosion resistant galvanised threaded rod and is very suitable for lifting slings.

KITO's TS series trolleys have bumpers, which hold the trolley surely on the beam and guard against damage to a trolley and wheels arising from a collision with the stopper or between two trolleys. Buffers are available as an option to install on the bumpers. Also, extended arms are available as an option to install on the bumpers to help prevent damage to a hoist from collision between the hoists suspended from trolleys on the same beam. Trolleys are adjustable for various widths of both tapered and flat flanges by changing the adjusting spacers.

Kito "EDC Series" Electric Chain Hoists are engineered for lightweight, fast lifting with the option to adjust the low speed. These Electric Chain Hoists are incredibly portable, they feature advanced hoist technology, are easy to service, and are built with industry-leading quality.

Runs on 230v AC power supply, single phase, compact to minimise headroom, lightweight, 100kg type weighs just 11.5kg with high performance mechanical brake. High strength load chain is electro-plated with nickel for rust and wear resistance.

Options on Kito Electric Hoist: Model, Additional Height of Lift per Metre (3mtr as Std).

Available in sizes 250kg, 500kg, 1000kg, 2000kg, 3000kg and 5000kg.

The New Kito "ER2 Series" Electric Chain Hoist further builds upon Kito's previous ER Series, seeking improved ease of use and superb working efficiency. To ensure safety, The hoist utilises a "double safety" mechanism that consists of a unique Friction Clutch and Upper-Lower limit switch. The control system features a fresh push-button interface and can easily be used for hours on end.

Various Options for this product are available in the form of: Hook Suspended, Push Travel Trolley, Geared Travel Trolley, Motorised Trolley, Multiple Lifting Speeds, Multiple Traversing Speeds

The Kito "EQ Series" Electric Chain Hoist is equipped with an Inverter which can change the control between mechanical and electrical, whilst keeping its conventional rigidity and high functions.

In addition to the safety functions such as the Overload Limiter, Friction Clutch and Upper-Lower limit switch, Push Buttons have been redesigned to allow prolonged use with ease.

The Kito SNER electric chain hoists are built for extreme duty applications which require a single phase power supply. Maintenance friendly features include a unique chain guide, hinged control panel, sealed housing and durable load sheave.

Options available: Custom lift lengths to suit your requirements, chain bag to keep chain clean and out of the way, plain or geared trolley mount for improved load control.

•     Industry Leading Wireless Telemetry Range – up to 250 metres or 800 feet
•     Unmatched Battery Life – over 800 hours with standard AA batteries
•     Standard update rate 3Hz, configerable to 200Hz for dynamic load monitoring
•     Internal Antennae – no external, easy to break, antennae
•     Audible Overload Alarm – alerts operator to any dangerous situation
•     Remote On-Off – easy to access remote switches
•     Proprietary 2.4 GHz Wireless – can be used globally
•     Error Free Data Transmission – 100% safe for lifting and load measurement
•     Environmentally Sealed - for use in all weather a broad range of weather conditions.
•     Compact and light – ideal for mobile use
•     Peak Hold – high speed peak testing mode
•     Tare – simple to use push button tare button provides both Gross and Net load values